Refine by

No filters applied

Sub categories

Cellular Communicators

12 items

Intrusion Panels

33 items

Keypads & Touchscreens

34 items

Motion & Glass Break Detectors

67 items

Sirens & Sounders

12 items

Wireless Sensors

52 items

Access Cards & Credentials

22 items

Access Hubs & Controllers

21 items

Card Readers

54 items

Control Systems

258 items

Credentials

656 items

Door Controllers

139 items

Door Hardware & I/O

1530 items

Door Locks & Strikes

325 items

Showing Results for Access Control

Compare

Out of stock
HES

SKU: 1LB-2-606

HES 1LB-2-606 Satin Brass Faceplate Kit

Satin brass faceplate kit for HES 1LB2-series electric strikes
- Fits HES 1LB2-series electric strikes with professional finished appearance
- Satin brass construction resists corrosion in commercial environments
- Mounts to door frame for clean integration with access control systems
$173.00 $172.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$173.00 $172.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-2-612

HES 1LB-2-612 Satin Bronze Faceplate Kit

Satin bronze faceplate kit for HES 1LB2 series electric strikes
- Fits HES 1LB2 series electric strikes; 24VDC compatible
- Satin bronze finish protects strike mechanism and internal wiring
- Indoor commercial access control installations on standard door frames
$173.00 $172.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$173.00 $172.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-2-613E

HES 1LB-2-613E Dark Bronze Faceplate Kit

Dark bronze faceplate kit for HES access control systems
- Dark oxidized satin bronze finish resists corrosion indoors and outdoors
- Direct compatibility with HES locking and access control hardware
- Corrosion-resistant metal construction maintains appearance over time
$144.00 $143.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$144.00 $143.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-2-629

HES 1LB-2-629 Bright Stainless Steel Faceplate Kit

Bright stainless steel faceplate for HES 1LB strike series
- Corrosion-resistant finish rated for indoor/outdoor commercial use
- Designed for HES 1LB series electric strikes with standard frame fit
- Professional finished appearance for access control installations
$270.00 $269.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$270.00 $269.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-2-630

HES 1LB-2-630 Satin Stainless Steel Faceplate Kit

Satin stainless steel faceplate for HES 1LB2 electric strikes
- Corrosion-resistant satin finish hides raw strike mechanism with flush mount
- Direct fit for HES 1LB2 series eliminates custom fabrication and fitment delays
- Indoor and light commercial rated; matte finish blends with contemporary hardware
$104.00 $103.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$104.00 $103.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-2-BSP

HES 1LB-2-BSP Black Suede Faceplate Kit

Black suede faceplate kit for HES 1LB2 series access control
- Compatible with HES 1LB2 series electric strike hardware
- Black suede finish for professional appearance in commercial spaces
- Wall-mounted or embedded installation for flexible deployment
$144.00 $143.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$144.00 $143.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-605

HES 1LB-605 Bright Brass Faceplate Kit

Bright brass faceplate for HES 1LB strike systems
- Direct fit for HES 1LB electromagnetic strike installations
- Bright brass finish coordinates with standard architectural hardware
- Single faceplate mounts to door frame for quick installation
$202.00 $201.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$202.00 $201.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-606

HES 1LB-606 Satin Brass Faceplate Kit

Satin brass faceplate kit for HES electromechanical lock systems
- Wall and door mount configurations for flexible access control trim
- Satin brass finish resists corrosion in commercial installations
- Compatible with HES 24VDC electromechanical locking platforms
$213.00 $212.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$213.00 $212.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-612

HES 1LB-612 Satin Bronze Faceplate Kit

Satin bronze faceplate kit for HES strike hardware with corrosion-resistant finish
- Wall-mounted installation with included hardware for quick deployment
- Corrosion-resistant satin bronze finish suits commercial and institutional settings
- Compatible with HES strike and locking hardware systems
$213.00 $212.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$213.00 $212.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-613E

HES 1LB-613E Faceplate Kit Dark Oxidized Satin Bronze

Dark oxidized satin bronze faceplate kit for HES 1LB electric strikes
- Fits HES 1LB series electric strikes with corrosion-resistant satin bronze finish
- Dark oxidized material resists fingerprints and wear in high-traffic commercial spaces
- Professional-grade finishing accessory for standard commercial door frame installations
$104.00 $103.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$104.00 $103.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-629

HES 1LB-629 Bright Stainless Steel Faceplate Kit

Bright stainless steel faceplate kit for HES electric strike systems
- Corrosion-resistant bright stainless steel finish for indoor commercial installations
- Compatible with HES electric strike systems for straightforward integration
- Professional appearance suitable for institutional and commercial access control
$202.00 $201.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$202.00 $201.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-630

HES 1LB-630 Satin Stainless Steel Faceplate Kit

Satin stainless steel faceplate for HES electric strike systems
- Satin stainless steel construction resists corrosion in high-traffic indoor environments.
- Engineered for direct integration with HES electric strike hardware and access control systems.
- Lightweight at 0.2 lb; fits standard door frame mounting for fast, clean installation.
$63.00 $62.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$63.00 $62.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 1LB-BSP

HES 1LB-BSP Black Suede Faceplate Kit

Black suede faceplate kit for HES access control systems
- Replacement faceplate with black suede finish for discrete appearance
- Compatible with HES locking and access control system hardware
- Designed for commercial and institutional security installations
$104.00 $103.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$104.00 $103.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 2004M

HES 2004M ElectroLynx Adapter for Electric Strikes

Retrofit adapter bridges legacy HES strikes to ElectroLynx control systems
- Bridges legacy HES electric strikes to ElectroLynx platforms without strike replacement.
- Preserves existing strike hardware investment during access control system modernization.
- Lightweight at 0.4 lb; US-made adapter suited for mixed-generation retrofit deployments.
$52.00 $51.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$52.00 $51.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: 2005M3

HES 2005M3 Electric Strike Power Controller

In-line power controller for HES strikes, 12–32V AC/DC input
- Regulates voltage across wide 12–32V AC/DC range for stable strike operation
- Resettable fuse and MOV surge suppression protect against overcurrent and spikes
- Input Status LED shows real-time power state; compact in-line form for retrofit fit
$138.00 $69.99 Save $68.01

Add to Cart
The item has been added
Free shipping over $499

$138.00 $69.99 Save $68.01

Add to cart Add to quote Compare
Compare

Out of stock
HES

SKU: 2006M

HES 2006M Plug-in Buzzer

Plug-in buzzer for HES electric strike systems with 24VDC operation
- Direct integration with HES strike systems for audible access confirmation
- 24VDC powered design works with standard HES electric strike product lines
- Compact form factor supports indoor commercial and institutional deployments
$70.00 $69.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$70.00 $69.99 Save $0.01

Add to quote Compare

Access Control

Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Buying Guide Get Recommendations Deployment Support

Build a Complete System

Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

Door intercoms

Aiphone DA-1MD Audio Handset Master Station

$82.99

Aiphone DB-1MD Hands-Free Master Station

$144.99

Aiphone DB-1SD Hands-Free Sub Master Station

$113.99

Aiphone JOS-1FW 7" Video Intercom Box Set with Mobile A

$820.99

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.