Honeywell

SKU: VISTA-15P

Honeywell VISTA-15P Wired Intrusion Control Panel

Hardwired intrusion panel with multi-zone support and 16.5VAC transformer

• Hardwired architecture eliminates RF interference and wireless dropouts in metal-frame buildings.
• Integrated 16.5VAC 40VA transformer powers the panel plus sirens, strobes, and relay modules.
• Supports smoke and fire detection analytics alongside intrusion zones in a single control panel.

Honeywell

SKU: V20PACK

Honeywell VISTA-20P Burglary Alarm Control Panel Kit - V20PACK

• Scales VISTA-20P to 48 total zones via DZT without replacing the base panel.
• Adds up to 4 wireless key fobs with zero zone consumption—ideal for retrofit sites.
• IP upload/download support eliminates phone-line dependency for remote programming.

Honeywell

SKU: VISTA-20P

Honeywell VISTA-20P Wired Intrusion Control Panel

Hardwired intrusion panel for retail, warehouse, and residential perimeter protection

• All-wired topology eliminates RF dropout in electrically noisy warehouses and floors.
• 16.5VAC 40VA transformer powers sensors, keypads, and auxiliary devices in one panel.
• Zone-based alarm logic integrates into established Honeywell platforms, reducing installer overhead.

Honeywell

SKU: VISTA-20PSIA

Honeywell VISTA-20PSIA Wired Intrusion Control Panel

Hardwired intrusion panel with integrated 40VA transformer for residential and light commercial

• Hardwired topology eliminates RF interference and dead zones in metal-structure sites.
• Integrated 16.5VAC 40VA transformer powers door strikes, relays, and perimeter devices.
• Smoke detection integration consolidates intrusion and life-safety zones on one panel.

Honeywell

SKU: VISTA-20PUL

Honeywell VISTA-20PUL Control Panel with Communicator

• 8 hardwired zones on-board, expandable to 48 hardwired or 64 with wireless receiver.
• Built-in IP communicator eliminates a separate module, reducing install complexity.
• Supports LTE-XA/XV/IA/IV and TUXEDO keypads for flexible upgrade paths.

Honeywell

SKU: VISTA-21IP

Honeywell VISTA-21IP Wired Intrusion Control Panel

Hardwired intrusion panel eliminates RF interference for predictable alarm response

• Hardwired design eliminates RF dead zones and delivers deterministic alarm signal latency.
• 16.5VAC 40VA onboard power runs panel, sensors, sirens, and keypads without added distribution.
• Intrusion-specific architecture suits commercial sites with existing low-voltage structured cabling.

Honeywell

SKU: VISTA-250BPT

Honeywell VISTA-250BPT 250-Zone Commercial Intrusion Panel

250-zone wired intrusion panel for large commercial multi-tenant buildings

• Supports up to 250 wired zones for high-density commercial and multi-tenant deployments.
• Wired-only architecture eliminates RF interference in concrete-heavy urban structures.
• Onboard 16.5VAC 40VA supply powers zone loops, keypads, and auxiliary devices.

Honeywell

SKU: VISTA-50P

Honeywell VISTA-50P Wired Intrusion Control Panel

Hardwired intrusion panel for multi-tenant buildings without RF interference

• Wired zone architecture eliminates RF interference in electromagnetically congested facilities.
• Onboard 16.5VAC 40VA transformer powers sensors and keypads without external conditioning modules.
• Engineered for mid-size commercial and multi-tenant deployments requiring independent zone monitoring.

Honeywell

SKU: WAVE2

Honeywell WAVE2 Two-Tone Indoor Alarm Siren

106 dB two-tone indoor siren for hardwired alarm systems

• 106 dB two-tone output cuts through ambient noise on warehouses and multi-floor sites.
• Hinged snap-open case enables terminal wiring access without unmounting the unit.
• 6–12 VDC input at 500 mA max integrates directly with standard 12 VDC panel aux outputs.

Honeywell

SKU: 5815WG

Honeywell Wide-Gap Door/Window Contact - 5815WG

• Wide-gap wireless contact for door and window magnet spacing >1 inch
• Honeywell 5800 series wireless transmission to compatible receivers
• CR2430 lithium battery for multi-year unattended operation

Honeywell

SKU: 5800PIR

Honeywell Wireless PIR Motion Detector - 5800PIR

• 345 MHz wireless transmission eliminates sensor loop wiring on compatible 5800-series panels.
• 35 ft × 40 ft coverage with pet immunity up to 80 lbs reduces false alarm callbacks.
• 3V lithium battery rated up to 5 years cuts maintenance visits in multi-sensor deployments.

i-PRO

SKU: MC-7610

i-PRO Credintial: 7610 Proximity Keyfob (minimum Order - MC-7610

• 125 kHz passive RFID needs no batteries, eliminating credential maintenance overhead.
• Compatible with Schlage AD-400/NDE and HID readers for broad ecosystem deployment.
• NDAA-compliant keyfob suits bulk credentialing of contractors and shift workers.

i-PRO

SKU: MC-T2MK7F8QMC

i-PRO MC-T2MK7F8QMC 8-Door Access Control Power Kit

Complete 8-door access control kit with integrated power and offline operation

• Includes control panel, power board, reader interfaces, and pre-tested cabling
• Local credential storage maintains door access during network outages
• Wall-mounted 18"H × 14.5"W housing with regulated power for locks and readers

i-PRO

SKU: T2MK77F16QMC

i-PRO T2MK77F16QMC TROVE2M2 Access Control Mount Kit

• Dual EFLow104NB modules and dual ACM8 readers support multi-door access deployments.
• PoE 802.3af compatibility eliminates separate power runs for connected devices.
• Cam-Lock hardware enables secure, tool-free rack mounting during installation.

i-PRO

SKU: T3MK77F16SMC

i-PRO T3MK77F16SMC TROVE3M3 Access Control Kit

• Complete bundle—controller, dual readers, ACM8 modules, VR6 relay, and PDS8 included.
• PoE 802.3af delivery eliminates separate 12V power runs at each reader location.
• Rack-mount form factor centralizes multi-door access hardware in a single enclosure.

i-PRO

SKU: T3MK77F16SQMC

i-PRO T3MK77F16SQMC TROVE3M3 Access Control Kit

• Dual EFLow104NB controllers deliver load balancing and failover redundancy.
• VR6 power redundancy unit with auto-switchover keeps mission-critical doors online.
• LINQ2 gateway enables unified monitoring and remote credential provisioning at scale.