Hanwha SBD-110GP Gangbox Mounting Plate (5-Pack)

Hanwha SBD-110GP Gangbox Mounting Plate

Overview

The Hanwha SBD-110GP is a gangbox mounting plate designed to simplify installation across multiple Hanwha IP camera models. Rather than managing camera-specific brackets and adapters, the SBD-110GP provides a standardized interface that works with 25+ models across four product families. This reduces your parts inventory, cuts integration time on multi-camera jobs, and makes swapping camera models in the field simpler without reworking the mounting infrastructure.

The unit ships as a pack of five plates, making it practical for small-scale retrofits or mid-size deployments where you're standardizing gangbox infrastructure across multiple sites.

Compatibility Across Hanwha Families

The SBD-110GP works with the following Hanwha camera series:

• QND Series (9 models): QND-6010R, QND-6012R, QND-6020R, QND-6022R, QND-6030R, QND-6032R, QND-8010R, QND-8020R, QND-8030R — covers fixed 2MP and 4MP dome options across multiple lens angles.
• XND Series (5 models): XND-6010, XND-6020R, XND-8020R, XND-8030R, XND-8040R — includes compact turrets and higher-resolution fixed models for flexible mounting needs.
• HCD Series (6 models): HCD-7010R/A, HCD-7020R/A, HCD-7030R/A — compact form factors for tight spaces and concealment applications.
• LND Series (6 models): LND-6011R, LND-6012R, LND-6021R, LND-6022R, LND-6031R, LND-6032R — lower-resolution 1080p and 2MP options for cost-sensitive bulk deployments.

This breadth means you can standardize on a single mounting plate type across retail, corporate, warehouse, and industrial installations running mixed Hanwha fleets — no need to stock different adapters per camera model.

Key Installation Benefits

• Single gangbox interface: Eliminates model-specific bracket variations. One plate works across 25+ cameras, cutting the SKU footprint and simplifying spare-parts logistics.
• Five plates per pack: Sized for single-site upgrades or small multi-camera jobs. Order additional packs as needed without overstock.
• Reduced setup time: Standardized mounting drops integration complexity on new builds and camera replacements. Field technicians work with one fastening procedure instead of learning variant-specific steps.
• Flexible camera swaps: If a site needs a resolution or lens change later, the gangbox infrastructure stays in place — unbolt the old camera and mount the new one using the same plate.
• Scalable deployments: Enterprise teams managing 50+ sites benefit from standardizing hardware across locations. Inventory planning becomes predictable, and installation crews train once.

Deployment Scenarios

The SBD-110GP is well-suited for:

• Retail chains: Standardize mounting across hundreds of store locations; reduces per-location commissioning labor and parts complexity.
• Warehouse automation: Fixed camera positions for dock monitoring, aisle coverage, and shipping zones — the plate simplifies racking and re-mounting when facility layouts change.
• Corporate multi-site rollouts: IT departments deploying Hanwha across offices, parking structures, and perimeters benefit from a single gangbox mount type.
• Industrial integrations: Manufacturing and logistics sites running mixed resolution needs (some areas need 2MP, others 4MP) can use one mounting plate throughout.
• System upgrades: Facilities replacing older fixed cameras keep existing gangbox infrastructure and swap in new Hanwha models without rewiring or rework.

The SBD-110GP (often searched as SBD 110GP) is a pragmatic choice when gangbox standardization reduces your integration cost more than a single-camera-specific bracket would save.

Frequently Asked Questions

Q: Does the SBD-110GP work with all Hanwha IP cameras?

A: No. It is designed for the QND, XND, HCD, and LND series listed above. Check your specific model against the compatibility list before ordering. If your camera is not listed, contact Hanwha support or the integrator to confirm compatibility.

Q: How many cameras can I mount with one pack?

A: The SBD-110GP ships as a 5-pack, so one unit covers five camera positions. For larger deployments, order multiple packs.

Q: Can I use the SBD-110GP on both indoor and outdoor cameras?

A: Yes. The plate is a passive mounting adapter and does not restrict or enable environmental ratings. The IP rating of your camera (e.g., IP66 outdoor) is determined by the camera itself, not the mounting plate. Use the plate with any compatible camera, indoor or outdoor.

Q: Do I need any tools to install the SBD-110GP?

A: Installation details depend on your gangbox type and camera model. Consult the Hanwha installation guide for your specific camera and gangbox infrastructure. Standard small tools (screwdriver, wrench) are typically required.

Q: What is the warranty on the SBD-110GP?

A: Refer to the Hanwha warranty statement for mounting accessories. Contact Hanwha or your integrator for specific coverage terms.

Q: Can I use the SBD-110GP with non-Hanwha cameras?

A: No. The SBD-110GP is engineered exclusively for Hanwha models within the families listed. Other brands' gangbox adapters are not compatible.

Ted Perry

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The SBD-110GP is a logistics play, not a performance upgrade. If you're rolling out 50+ Hanwha cameras across multiple sites and currently managing different mounting brackets per model, standardizing on the SBD-110GP cuts inventory complexity and training overhead. The 5-pack size is right-sized for single-location retrofits or as a standard component in pre-built site packages.

Key Considerations:

• Compatibility is the constraint: The plate works with 25+ models across QND, XND, HCD, and LND families, but it is not universal across all Hanwha lines. Before ordering, verify your specific camera SKU is on the list. A single incompatible model in your fleet means sourcing a different plate for that one position.
• Pack quantity: Five plates per unit is efficient for small to medium jobs. For 20+ camera deployments, plan multiple orders early to avoid lead-time surprises.
• Mounting infrastructure dependency: The SBD-110GP simplifies camera-to-plate integration, but it assumes your gangbox structure (whether true gangbox or pole-mount hardware) is already in place and compatible with the plate interface. Do not treat this as a universal mount for arbitrary structures.

Deployment Fit: Deploy the SBD-110GP when you are standardizing Hanwha camera infrastructure across retail chains, warehouses, or multi-site corporate deployments where installation labor and parts variance are cost drivers. It is a poor fit for single-camera jobs or heterogeneous camera fleets mixing Hanwha with other brands.