Hanwha SBD-110GP1 Universal Adapter Plate
The SBD-110GP1 is a mounting accessory engineered to extend installation flexibility across Hanwha's IP camera lineup. Where standard wall or ceiling mounts fall short—due to architectural constraints, corner installations, or non-standard surfaces—this adapter plate bridges the gap without requiring proprietary solutions for each camera model.
Key Features
- Broad camera compatibility: Accommodates 20 distinct camera models spanning QNV, QND, QNF, LND, QNE, and ANE series, including the QNV-C8011R, QND-6011, QND-8021, QNF-8010, LND-6022R, QNE-8021R, and ANE-L7012R. This reduces procurement overhead—you stock one adapter instead of managing multiple mounting solutions across different camera families.
- Durable construction: Built from high-quality materials rated for demanding indoor and outdoor environments. Critical for retail, warehouses, and industrial facilities where vibration, temperature swings, and seasonal weather stress mounts over years of operation.
- Compact, space-efficient form: The plate's minimal profile maintains full camera field of view and optical performance—no cropping, no vignetting. Matters when you need every pixel from your surveillance investment.
- Intuitive mounting design: Simplifies installation by eliminating custom fabrication or adapter stacking. On-site installation time drops significantly when integrators can reach for a proven, standardized solution.
- Expands placement options: Enables mounting in corners, under eaves, on bollards, or against non-planar surfaces where traditional mounts won't work. Unlocks coverage angles that would otherwise require relocating cameras or adding auxiliary units.
- Universal fit reduces inventory: One part number handles multiple camera types across your deployment. Simplifies spare-parts planning and cuts warehouse overhead on a multi-site operation.
Compatibility & Integration
The SBD-110GP1 works across mounting and installation accessories for Hanwha cameras. It is compatible with any standard IP camera infrastructure, whether you're deploying direct to an NVR, edge recording, or cloud-connected architecture. The adapter itself is passive—no power, no configuration—so it introduces no compatibility risk.
When selecting this plate, verify your camera model against the 20-model compatibility list in the datasheet. Most Hanwha compact domes and turrets in recent generations are supported; larger fixed-position or specialty optics may require alternative mounting solutions.
What's in the Box
- 1x Adapter plate
- Mounting hardware (screws and anchors)
- Installation guide
Frequently Asked Questions
Q: Does the SBD-110GP1 fit all Hanwha cameras?
A: No. The adapter plate is designed for 20 specific models across the QNV, QND, QNF, LND, QNE, and ANE series. Verify your camera model against the compatibility list before ordering. Specialty units, multi-sensor cameras, and older legacy models may not be compatible.
Q: Will using the SBD-110GP1 change my camera's field of view or image quality?
A: No. The adapter plate is passive and does not affect optics, IR performance, or image capture. It only changes the mounting position and angle of the camera.
Q: Can I use the SBD-110GP1 outdoors?
A: Yes. The plate is constructed from durable materials suitable for outdoor environments. However, the camera itself must be rated for outdoor use (IP66/IP67). The adapter does not add environmental protection beyond what your camera already provides.
Q: What tools do I need to install the SBD-110GP1?
A: Standard hand tools (screwdriver, drill if using wall anchors). The mounting hardware is included. The installation guide details tool requirements for your specific mounting surface.
Q: Is a separate power supply needed for the SBD-110GP1?
A: No. The adapter plate is a passive mechanical accessory with no electrical components. Power and data continue to flow directly from your camera to your PoE switch or NVR as normal.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The SBD-110GP1 solves a real installation problem: when your surveillance camera needs to go somewhere the standard mount won't reach. I've seen integrators waste hours fabricating custom brackets or stacking multiple adapters to hit a corner angle or non-standard surface. The SBD-110GP1 handles 20 Hanwha models, which means one part number covers most of your QNV, QND, QNF, and LND compact deployments.
Technical Highlights:
- 20-model compatibility: Covers QNV-C8011R, QND-6011, QND-8021, QNF-8010, LND-6022R, QNE-8021R, ANE-L7012R, and 13 others. One plate in stock handles the majority of your compact camera installs, cutting spare-parts overhead on multi-site jobs.
- Passive design (no power, no electronics): Eliminates compatibility risk with your PoE infrastructure, NVR, or VMS. The plate is inert—just stainless or powder-coated steel with standard fasteners.
- Maintains full optical performance: No vignetting, no optical degradation. Your IR coverage and field of view stay intact. Critical for surveillance jobs where every megapixel and meter of IR range matters.
Deployment Considerations:
- Verify camera model before ordering: The plate fits 20 specific models. If you're deploying a specialty variant (panoramic, multi-sensor, or older legacy unit), cross-check the compatibility list—don't assume it will work.
- Mounting surface matters: The adapter is only as solid as what you bolt it to. On masonry, use proper anchors and concrete fasteners. On thin drywall or composite panels, you may need backing plates or toggle bolts. The installation guide addresses this, but site prep is your responsibility.
This adapter earns its place on a warehouse retrofit or retail rollout where you're standardizing on Hanwha compact domes and need to hit non-standard angles without custom fabrication. For single-camera installs, it's overkill. For a 50-camera deployment across multiple branches, SBD-110GP1 (often searched as SBD 110GP1) saves integrator labor and procurement complexity.
