Geovision 94-NU704-SHORT IP PTZ Camera Cable

Geovision 94-NU704-SHORT IP PTZ Camera Cable

Overview

The Geovision 94-NU704-SHORT is a purpose-built cable for IP PTZ (Pan-Tilt-Zoom) camera systems where run length between the camera head and control equipment is constrained. The SHORT designation means this cable is optimized for proximity installations—typical in rack-mounted or wall-mounted control scenarios where the distance from PTZ unit to power/data distribution is under 10–15 feet. Use this when you need stable connectivity without excess cable bulk in the equipment area.

Compatibility

This cable is designed for Geovision IP PTZ camera systems. Verify compatibility with your specific PTZ model by checking the camera's documentation for port type and connector specification—do not assume all Geovision PTZ models use identical connectors. If you're integrating with a non-Geovision PTZ or extending the run significantly beyond 15 feet, consult the PTZ manufacturer's cable specifications or contact a systems integrator.

Installation Notes

Keep cable runs away from high-voltage AC lines and fluorescent ballasts to minimize EMI coupling into the data signal. Avoid tight bends at connectors—maintain at least a 2-inch bend radius to prevent internal conductor damage. If routing through conduit or cable trays, allow for thermal expansion and do not crush the cable under other equipment. Test data continuity and power delivery before final camera installation.

What's in the Box

• 1x Geovision 94-NU704-SHORT IP PTZ camera cable (short run)