Hanwha WRN-1632-6TB 32-Channel 12MP NVR with 6TB Storage
Overview
The Hanwha WRN-1632-6TB is a 4-bay network video recorder built to handle up to 12MP IP camera streams across a mid-to-large camera deployment, arriving preinstalled with 6TB of storage so you're recording on day one without sourcing drives separately. WRN-1632-6TB (often searched as WRN 1632 6TB) sits in the rack-mount NVR category, and the 250 Mbps recording throughput is the number to check first — it tells you how many high-resolution streams you can actually run concurrently before the recorder becomes the bottleneck, not the camera count on the spec sheet.
Key Features
- Up to 12MP camera support: handles anything from standard 2MP corridor cameras up to 12MP panoramic or multi-sensor units, so one recorder covers mixed-resolution deployments without a second NVR for the higher-end cameras.
- 250 Mbps recording throughput: this is the real capacity ceiling — plan your channel count and per-camera bitrate against this number rather than assuming every channel can run at maximum resolution simultaneously.
- 4 SATA bays, up to 10TB each (40TB total): gives you a clear upgrade path as retention requirements grow, without swapping the whole unit — just add or upsize drives as storage needs increase.
- 6TB preinstalled storage: the recorder ships ready to deploy, cutting install time versus a bare chassis that needs drives sourced, seated, and formatted on site.
- Dual HDMI and DP video outputs: lets you run a local monitoring wall or control-room display without an external splitter or converter box, useful for guard stations reviewing live feeds directly off the NVR.
- 2 x GbE RJ-45 network interfaces: supports link redundancy or splitting camera traffic from client/viewing traffic onto separate network segments, which keeps a saturated camera network from choking live viewing or remote access.
- 340W power consumption: factor this into UPS sizing and rack power budgeting, especially in multi-NVR racks where cumulative draw adds up fast.
- 100-240 VAC wide input range: deploys the same unit across US and international sites without a separate power supply SKU, simplifying inventory for multi-site integrators.
- 0°C to +40°C operating range: confirms this is a climate-controlled server room or rack enclosure unit — don't plan on mounting it in an unconditioned outdoor cabinet.
- USB 2.0 (front) and USB 3.0 (rear) ports: front USB 2.0 ports handle quick mouse/keyboard setup or firmware loading at the rack, while rear USB 3.0 speeds up video export to external drives during evidence pulls.
- Included USB mouse and rack mount brackets: local configuration and standard rack integration are covered out of the box, no separate accessory order needed to get it mounted and operational.
Integration & Compatibility
At 440mm x 89.8mm x 428.4mm (17.32" x 3.54" x 16.87"), the WRN-1632-6TB fits a standard 2U rack space alongside network video recorders and switching gear in a typical head-end rack. Pair it with Hanwha IP cameras for a single-vendor deployment, or review a VMS architecture guide before finalizing channel count and retention targets against the 250 Mbps ceiling. If your site is expanding past the current camera count, plan cabling and switch capacity now — a PoE switch sized for headroom avoids a re-cable job later. For sites needing more physical drive capacity than the preinstalled 6TB, the 4-bay SATA architecture supports up to 40TB total as retention policies grow; review a storage and retention guide to size drives against your camera count and days-of-retention target before ordering additional storage.
What's in the Box
- 1x Hanwha WRN-1632-6TB NVR (6TB preinstalled)
- 1x USB mouse
- 1x set of rack mount brackets
Frequently Asked Questions
Q: How many cameras can the WRN-1632-6TB support?
A: It supports IP cameras up to 12MP resolution, with actual concurrent channel count limited by the 250 Mbps total recording throughput rather than a fixed channel number.
Q: How much storage does the WRN-1632-6TB ship with, and can it be expanded?
A: It ships with 6TB preinstalled across its 4 SATA bays, each supporting up to 10TB, for a maximum of 40TB total internal storage.
Q: Can I connect a monitor directly to the WRN-1632-6TB?
A: Yes, it has both HDMI and DP video outputs for direct local monitor connection.
Q: What are the power requirements for the WRN-1632-6TB?
A: It accepts 100-240 VAC input and draws up to 340W, making it compatible with both US and international power without a separate supply.
Q: Does the WRN-1632-6TB come with rack mounting hardware?
A: Yes, rack mount brackets and a USB mouse are included in the box.
Q: What is the operating temperature range for the WRN-1632-6TB?
A: 0°C to +40°C (32°F to 104°F), so it's intended for indoor, climate-controlled environments such as a server room or rack enclosure.
The spec that jumps out on the WRN-1632-6TB is the 250 Mbps recording throughput ceiling — that's the real planning number, not the 12MP camera support figure. I've seen integrators size a job off max resolution alone and then run into bandwidth contention at the recorder once they add more than a handful of high-bitrate streams.
Technical Highlights:
- 4 SATA bays, 40TB max: starting at 6TB preinstalled gives you room to scale to 40TB (4 x 10TB) as retention requirements grow, without forklifting the whole recorder.
- Dual GbE RJ-45 ports: lets you separate camera-side traffic from client/viewing traffic on two physical links, which matters once you're pushing close to that 250 Mbps ceiling.
- 340W draw on 100-240 VAC: wide input range covers domestic and international deployments on the same SKU, but 340W is worth budgeting into rack UPS sizing on multi-NVR jobs.
Deployment Considerations:
- Rack fit is standard 2U territory at 440mm x 89.8mm x 428.4mm, and the included brackets mean no separate rack kit to source.
- Operating range is 0°C to +40°C — this is a conditioned-space recorder, not something to stick in an unconditioned outdoor enclosure or unventilated closet.
This is a solid fit for a mid-size commercial site consolidating 12MP-and-under cameras onto one recorder — think a multi-floor office or retail block running a mix of standard and panoramic cameras — where the 6TB head start on storage and the dual video outputs let you get a guard-desk monitor running without extra hardware on day one.
