ACTi E417 2MP Zoom Bullet Day/Night Extreme WDR Camera

Overview

The ACTi E417 is a 2MP zoom bullet camera designed for outdoor perimeter and fixed-view monitoring where extreme wide dynamic range and low-light sensitivity are non-negotiable. The E417 pairs a 10x optical zoom lens with extreme WDR and superior low-light processing — meaning you capture usable detail in scenes that swing from direct sunlight to deep shadow without the typical halo artifacts or noise floor collapse. This is the right choice for loading docks, parking area entries, and building facades where lighting varies wildly across a single frame.

Compatibility

The E417 is a standalone IP bullet camera compatible with any ONVIF-compliant video management system, enterprise NVR, or hybrid recorder that accepts H.264 or H.265 streams. It integrates into mixed-vendor deployments and works with standard PoE infrastructure (802.3af/at switches). Verify your NVR or VMS documentation for ONVIF Profile S or higher support if you require full interoperability for remote configuration and firmware updates.

Installation Notes

The E417 is rated for outdoor deployment and operates across a wide temperature range. Mount on standard wall or bracket hardware; ensure the lens faces the target area and is not backlit by direct sun during critical hours. Power via PoE from a managed switch; budget approximately 13–15W for this model. Position zoom and focus during commissioning — manual adjustment is required on first install, and zoom settings will persist through power cycles.

What's in the Box

• 1x ACTi E417 camera unit
• 1x power adapter (PoE injector or direct PoE)
• 1x mounting bracket and hardware
• 1x RJ-45 cable
• 1x user documentation