ACTi Q14-K1 2MP Indoor Pinhole Covert Camera

ACTi Q14-K1 Concise Descriptor

Overview

The Q14-K1 is a 2MP pinhole covert camera designed for scenarios where a visible camera defeats the monitoring objective—retail loss prevention, office confidentiality areas, facility verification without visible deterrent signage. Unlike traditional domes or bullets, the pinhole form factor fits into wall outlets, picture frames, shelving fixtures, or other inconspicuous mounting points, allowing you to record in spaces where aesthetics or operational discretion matters. The 2MP sensor delivers evidence-grade clarity in confined areas without consuming storage on unnecessary megapixels. Built-in microphone captures synchronized audio, and WDR (Wide Dynamic Range) preserves detail when mixed lighting—bright window and shadowed interior—would otherwise blow out or crush detail on a standard sensor. Power delivery via PoE means a single twisted-pair run handles both power and video; no separate 12V supplies or coax to route.

Compatibility

The Q14-K1 operates as a standard IP surveillance device compatible with any ONVIF-compliant VMS (Video Management System)—Milestone, Genetec, Axis Camera Station, or OEM systems supporting ONVIF Profile S. It integrates into existing surveillance camera infrastructure without requiring proprietary software or specialized integrations. ACTi management platforms also natively support the Q14-K1. Deploy it alongside traditional fixed or PTZ cameras in the same network; PoE switches with sufficient budget (13W per unit) and standard Ethernet cabling are the only infrastructure requirements. No coax, no analog video encoders, no legacy dependencies.

Installation Notes

Because the Q14-K1 is a covert device, placement requires planning. Identify mounting surfaces—outlet boxes, frame cavities, shelf edges—that provide stable mounting and allow the fixed lens adequate sight lines to the target area. The pinhole lens has a fixed focal length (details not specified in evidence); confirm the intended coverage distance and angle before mounting. Power the device via PoE injector or PoE switch port (13W budget per port). Use standard Cat5e or Cat6 cabling; run cable through walls, conduit, or behind fixtures to maintain concealment. Audio input via built-in microphone requires no additional components. Test video and audio feed through your VMS before final installation to verify coverage and sound quality align with objectives.

What's in the Box

No package contents specified in available evidence.