i-PRO WV-S65340-Z2K 2MP Outdoor Vandal Resistant PTZ Camera

i-PRO WV-S65340-Z2K 2MP Outdoor Vandal Resistant PTZ Camera

Overview

The WV-S65340-Z2K is a 2MP outdoor PTZ designed for perimeter protection and coastal surveillance where salt spray, temperature extremes, and impact vandalism demand both optical reach and structural durability. The 21x optical zoom (4.0–84.6 mm) enables operators to frame wide-area coverage, then zoom to license plates or face detail without camera switching. IK10 vandal resistance and IP66/IP67 weatherproofing survive direct impact and salt-laden spray (ISO 14993 compliant). Super Dynamic 144dB WDR delivers usable detail in backlit and high-contrast scenes; 940nm invisible infrared and color night vision (0.001 lx minimum in B/W mode) enable 24/7 imaging across −50 °C to +60 °C without visible IR spillover. PoE++ (802.3bt) at 95W peak eliminates separate electrical infrastructure on modern switches. Built-in FIPS 140-2 Level 3 Secure Element (EdgeLock® SE050F) meets NDAA compliance requirements for federal and critical infrastructure procurement.

Compatibility

The WV-S65340-Z2K integrates into any standards-based IP camera VMS or NVR via ONVIF Profile G, M, S, and T. H.265, H.264, and MJPEG codec support ensures compatibility with modern storage-efficient systems and legacy architectures alike. On-Screen Display (OSD) titling, Video Motion Detection (VMD), and selectable day/night modes (color/monochrome with ICR auto-switching) configure through standard ONVIF management interfaces. Audio input supports paired microphones for two-way communication or event annotation. PTZ cameras in this class mount to wall, ceiling, or rack provisions — verify your mounting surface can handle the unit's weight and the slew torque of a 21x zoom head under continuous pan/tilt operation.

Installation Notes

The WV-S65340-Z2K requires PoE++ power (up to 95W peak during pan/tilt motion); verify your injector or network switch supplies sufficient budget — standard PoE+ (802.3at) will not power this unit. ClearSight Coating reduces glare in high-reflection environments (coastal glass, metal facades). For heavy salt exposure, follow ISO 14993 precautions: rinse optical surfaces regularly and inspect gaskets and pan/tilt seals annually. Operating temperature range −50 °C to +60 °C (−58 °F to +140 °F) covers harsh climates; confirm your installation site falls within these bounds before deployment.