i-PRO WV-S65340-Z2N1 2MP Outdoor Vandal Resistant PTZ Camera

i-PRO WV-S65340-Z2N1 2MP Outdoor Vandal Resistant PTZ Camera

Overview

The WV-S65340-Z2N1 is a 2MP pan-tilt-zoom camera built for perimeter defense, entry-point verification, and wide-area surveillance where optical reach matters. The 21x optical zoom (4.0–84.6 mm) delivers frame-worthy detail on distant subjects—critical when you need to verify identity at a gate or track movement across a loading dock without resorting to pixel interpolation. IP66 and IP67 ratings handle rain, dust, and salt spray without optical degradation. IK10 vandal resistance survives direct physical assault. Operating range −50°C to +60°C qualifies it for arctic warehouses to tropical ports on the same hardware. PoE++ (802.3bt) at 95W eliminates separate power supplies. NDAA compliance supports U.S. federal and defense-sector deployments. Super Dynamic 144dB WDR captures usable detail in mixed-light scenes (sun-blasted facade + shadowed alcove) without HDR halo artifacts. Color night vision operates down to 0.001 lux in black-and-white mode—no separate IR illuminator needed for most indoor perimeter work.

Compatibility

The WV-S65340-Z2N1 integrates into any ONVIF-compliant video management system—Milestone, Genetec, Axis Camera Station, or third-party platforms supporting ONVIF Profile G, M, S, and T. Streams H.265, H.264, and MJPEG, so bandwidth-limited networks select the codec that minimizes storage burden. VMD (video motion detection) analytics trigger events at the edge without backend processing overhead. Audio input enables incident documentation and two-way communication with on-site personnel. Wall and rack mounting accommodate pole installations and building-integrated deployments. Requires PoE++ (802.3bt) injection—standard 802.3af will not sustain the motor load during pan/tilt operation; verify your switch or injector supports Class 4+ before mounting.

Installation Notes

PoE++ power delivery is mandatory at 95W; confirm your infrastructure supplies at least Class 4 capacity. Pan/tilt speed should be configured conservatively on multi-camera sites where simultaneous movement strains available bandwidth. IR cut-filter modes (Off/On/Auto1/Auto2/Auto3) adjust automatically; manual override is available if day/night switching introduces artifacts in your scene. On-screen display (OSD) supports up to 40-character alphanumeric camera titles for multi-site management. Built-in FIPS 140-2 Level 3 Secure Element (EdgeLock SE050F) encrypts credentials in hardware—firmware updates cannot compromise stored authentication material.