Middle Atlantic CM2-U1NOR 2A Single NordX Faceplate Module

Overview

The CM2-U1NOR is a 2A single-opening NordX/CDT unloaded faceplate module in the Wiremold CM Series, built for flushmount installations where you need a clean, standardized opening for NordX/CDT-style connectors without committing to a pre-loaded jack. This is a passive mechanical component, not an active device — it gives you the mounting frame and opening; you supply the connector or jack module that fits your cabling standard. The light gray finish (product color: Light Gray) matches the rest of the CM Series faceplate line, so a run of CM2-U1NOR modules across multiple flushmount boxes reads as one consistent wall or floor box system rather than a mismatched patchwork of finishes.

Key Features

• 2A single-opening format: sized for one NordX/CDT-style insert, so you're not overbuilding a location that only needs a single connector drop — keeps the flushmount box compact instead of oversizing it for capacity you don't need.
• Unloaded module design: ships without a pre-installed jack or connector, which means you're not locked into a connector type at time of purchase — useful when the cabling spec (fiber, copper, AV) isn't finalized yet or varies by location.
• Flush mount type: designed to sit flat in a wall plate, floor box, or furniture feed rather than surface-mount, so it stays low-profile in finished spaces like conference rooms and open-plan offices where a raised housing would be a trip hazard or an eyesore.
• Light Gray finish: a neutral commercial color that blends into most wall plate and floor box color schemes already in use in the CM Series, avoiding a mismatched module in an otherwise uniform installation.
• Wiremold CM Series compatibility: built to the CM Series module footprint, so it drops into the same flushmount boxes and faceplates already spec'd for other CM Series modules — no need to swap box hardware to add or change an opening.
• NordX/CDT opening standard: matches the NordX/CDT connector footprint directly, so integrators standardizing on that connector family can spec the CM2-U1NOR across a job without hunting for an adapter plate.

Integration & Compatibility

Because the CM2-U1NOR (Manufacturer Part Number CM2-U1NOR-GY) is unloaded, it's meant to be paired with your own NordX/CDT connector or jack insert at time of install — treat it as the frame, not the finished drop. It's built for the Wiremold CM Series family of flushmount boxes and faceplates, so plan the box and cover plate selection alongside the module rather than as an afterthought. If your job spec calls for a mix of connector types across a building — data, AV, low-voltage control — the unloaded format means you can standardize on the CM2-U1NOR opening and vary only the inserted connector per location, which simplifies your bill of materials during a multi-room buildout.

Frequently Asked Questions

Q: Does the CM2-U1NOR come with a connector or jack installed?

A: No. The CM2-U1NOR is an unloaded module — it provides the NordX/CDT-format opening and flushmount frame only. You supply and install the connector or jack insert that matches your cabling standard.

Q: What color is the CM2-U1NOR faceplate module?

A: Light Gray, matching the standard CM Series finish used across other Wiremold flushmount modules.

Q: Is the CM2-U1NOR flush mount or surface mount?

A: Flush mount. It's designed to sit flat within a wall plate, floor box, or furniture feed rather than project from the surface.

Q: What is the CM2-U1NOR module opening size?

A: It's a 2A single-opening module, sized for one NordX/CDT-format connector or jack insert.

Q: Will the CM2-U1NOR fit standard Wiremold CM Series boxes and faceplates?

A: Yes. It's built to the CM Series footprint, so it installs into the same flushmount boxes and cover plates already spec'd for other CM Series modules.

Ted Perry

The CM2-U1NOR is one of those parts that only matters when you're standardizing a job's faceplate program, and it does exactly one thing: it gives you a 2A single NordX/CDT opening in a flushmount frame, unloaded, in Light Gray.

Technical Highlights:

• 2A single opening: one NordX/CDT-format slot per module — right-sized for a single connector drop instead of forcing a multi-gang box where you only need one port.
• Unloaded construction: no connector or jack pre-installed, so the module ships as pure mechanical frame — you're not paying for or stuck with a jack type you don't need.
• Light Gray finish: keeps the module visually consistent with the rest of the CM Series lineup across a multi-room install.

Deployment Considerations:

• Because it's unloaded, budget for the connector/jack insert as a separate line item — the CM2-U1NOR is the frame, not the finished port.
• Confirm your flushmount box and faceplate are CM Series-compatible before ordering; this module is built to that specific footprint, not a universal fit.

Reach for the CM2-U1NOR when you're wiring a conference room floor box or furniture feed program on a NordX/CDT standard and want every opening across the job to match in both format and finish — not when you need a pre-terminated, ready-to-patch jack out of the box.