Middle Atlantic CM2-U1NOR-WH Single-Gang Nordx Wall Module, White

Overview

The CM2-U1NOR-WH is a single-gang Nordx wall module from Middle Atlantic, built to bring one Nordx-format connector opening into a standard wall plate footprint. It's sized as a 2A module — a single-position cutout — finished in white to match common commercial wall plate schemes. This is a wiring infrastructure component, not an active device: it exists to give low-voltage cabling (data, AV, or telecom drops using the Nordx connector standard) a clean, mountable termination point at the wall.

Key Features

• Nordx module format: accepts a single Nordx-style connector, so you get a standardized opening instead of cutting a plate to fit a nonstandard jack — useful when a job spec already calls for Nordx terminations.
• 2A (single-position) sizing: occupies one module slot on a Middle Atlantic-compatible wall plate system, letting you mix it with other module types on multi-gang plates rather than dedicating a whole plate to one connector type.
• White finish: matches standard commercial wall plates and switch covers, so it blends into office, conference room, or corridor finishes without a mismatched accent piece.
• Wall-mountable: installs directly into a wall plate opening for a fixed, panel-level termination point rather than a surface-mount box.
• TAA compliant: relevant for integrators bidding federal, state, or other government-funded projects where Trade Agreements Act sourcing rules apply to the bill of materials.

Integration & Compatibility

As a modular wall plate insert, the CM2-U1NOR-WH (often searched as CM2 U1NOR WH) is meant to pair with a compatible Middle Atlantic multi-gang plate frame rather than stand alone — confirm gang-plate compatibility with your existing wall plates and switch covers lineup before specifying it on a job. For broader low-voltage wall infrastructure planning, a PoE and cabling planning guide can help you map out module counts per room before ordering. It fits naturally alongside other Middle Atlantic wiring device modules on the same plate, and pairs well with networking hardware runs terminating at the wall, or with AV and data cabling feeding into the Nordx opening.

Frequently Asked Questions

Q: Is the CM2-U1NOR-WH TAA compliant?

A: Yes, the CM2-U1NOR-WH is TAA compliant, making it eligible for use on Trade Agreements Act-restricted procurement.

Q: What color is the CM2-U1NOR-WH?

A: It ships in white, matching standard commercial wall plate finishes.

Q: Can the CM2-U1NOR-WH be wall-mounted?

A: Yes, it's a wall-mountable module designed to install into a compatible wall plate opening.

Q: What module size is the CM2-U1NOR-WH?

A: It's a 2A single-position module, occupying one slot on a compatible multi-gang wall plate.

Marty Allison

The CM2-U1NOR-WH is a small part with an outsized effect on how clean a wall plate looks when a job calls for Nordx terminations — I spec it whenever a plate needs to mix connector types instead of dedicating a full plate to one jack.

Technical Highlights:

• 2A single-position sizing: takes up exactly one module slot, so it shares a multi-gang plate with other module types instead of forcing a single-purpose plate.
• Nordx connector format: gives you a standardized opening for Nordx-terminated cabling instead of a field-cut plate.
• White finish: matches standard commercial plate and switch cover colors, so it doesn't stand out as a mismatched insert.

Deployment Considerations:

• Confirm the gang-plate frame you're using is Middle Atlantic-compatible before ordering — this module is an insert, not a standalone plate.
• TAA compliance matters here if you're bidding a government or federally funded job; verify it against your specific contract requirements.

Good fit for a commercial or institutional low-voltage retrofit where the wall plate schedule specifies mixed Nordx and standard modules on the same multi-gang plate — the CM2-U1NOR-WH slots in without breaking the plate's finish consistency.