Middle Atlantic CM2-U2NOR-BK Flushmount NORDX/CDT Dual Module

Overview

The Middle Atlantic CM2-U2NOR-BK is a flushmount unloaded module built for the Wiremold CM series raceway system, configured for 2 x NORDX/CDT sockets in a black finish. It's an unloaded module — meaning it provides the mounting cavity and faceplate opening for two NORDX/CDT-compatible connectors, which you source and install separately to match the exact jack type your job calls for (data, voice, or AV). For integrators building out structured cabling drops inside a Wiremold CM raceway run, CM2-U2NOR-BK (often searched as CM2 U2NOR BK) is the module that lets you standardize on a single flushmount footprint across a job while keeping connector selection flexible drop by drop.

Key Features

• 2 x Socket Capacity: Two NORDX/CDT socket positions per module means you can land two connections — a data run and a voice run, or two data drops — in a single flushmount opening instead of dedicating separate faceplates to each, which keeps device wall plates cleaner in dense workstation clusters.
• Flush Mount Design: The flush profile sits low against the raceway cover rather than standing proud, which matters in finished spaces (conference rooms, open-plan offices) where a bulky surface-mount module would be a visible snag point or an aesthetic miss.
• Unloaded Module Format: Because the module ships without connectors pre-installed, you're not locked into a jack type at time of purchase — swap in the NORDX/CDT connector style each drop actually needs (RJ45, etc.) at termination time, which is the right call on any job where connector counts and types aren't fully locked until rough-in.
• Black Finish: The black colorway is the standard choice for matching dark AV racks, black raceway runs, and modern black-trim office builds — pick this over a lighter finish when the module needs to disappear against a black CM raceway cover rather than stand out.
• Wiremold CM Raceway Compatibility: Built specifically for the Wiremold CM 2A raceway platform, so it drops into an existing CM-series installation without adapter hardware — a real time-saver on retrofit jobs where the raceway is already in place and you're just adding or upgrading drops.

Integration & Compatibility

CM2-U2NOR-BK is purpose-built for the Wiremold CM 2A raceway family and is not a universal-fit accessory — confirm your raceway is CM-series before ordering, since the flushmount geometry is specific to that platform. Because it's an unloaded NORDX/CDT module, connector compatibility runs through the NORDX/CDT standard rather than a fixed jack type, giving you latitude to pair it with the specific data or voice connectors your cabling plan specifies. This makes the CM2-U2NOR-BK a practical fit for mixed-use runs inside broader network cabling infrastructure projects, particularly where raceway standardization matters more than a fixed connector loadout.

Frequently Asked Questions

Q: Is the CM2-U2NOR-BK a loaded or unloaded module?

A: It's unloaded — the module provides two NORDX/CDT socket positions, and connectors are sourced and installed separately based on the drop's requirements.

Q: How many sockets does the CM2-U2NOR-BK support?

A: Two sockets per module.

Q: What raceway system is the CM2-U2NOR-BK designed for?

A: The Wiremold CM 2A raceway platform, using a flushmount profile.

Q: What color is the CM2-U2NOR-BK available in?

A: Black.

Q: Does the CM2-U2NOR-BK mount flush or surface-mount?

A: It's a flushmount module, sitting low against the raceway cover rather than protruding.

Marty Allison

The CM2-U2NOR-BK is one of those parts that only matters when it's wrong — an unloaded 2-socket NORDX/CDT flushmount module for the Wiremold CM 2A raceway, and getting the raceway match right up front saves a return trip.

Technical Highlights:

• 2 x Socket Capacity: Two NORDX/CDT positions per module lets you consolidate a data and voice drop, or two data drops, into one flushmount opening instead of running two separate modules.
• Unloaded Module Format: No pre-installed connectors means the jack type is decided at termination, not at the supply house — useful when the cabling spec isn't finalized at time of order.
• Flush Mount Profile: Sits low against the CM raceway cover rather than standing proud, which keeps finished walls in conference rooms and open offices clean.

Deployment Considerations:

• Confirm the raceway on site is Wiremold CM 2A series before ordering — this module's flushmount geometry is built for that platform specifically and won't drop into a different raceway family.
• Because it's unloaded, budget for NORDX/CDT connectors as a separate line item — this part alone doesn't complete the drop.

Reach for the CM2-U2NOR-BK on any office build-out or retrofit already standardized on Wiremold CM 2A raceway, where you need a clean, low-profile 2-socket black module and want connector flexibility locked in at termination rather than at purchase.