Middle Atlantic 25SP 32DEEP Plexi Door & BIT Cherry TOP - BGR-25SA32MDK-E0

Middle Atlantic BGR-25SA32MDK-E0 25RU Mobile AV Rack with Plexi Door and Biltmore Cherry Top

Overview

The Middle Atlantic BGR-25SA32MDK-E0 is a 25-rackunit mobile AV enclosure designed for demanding installations where structural integrity, finished aesthetics, and genuine portability must coexist. Built from steel with a black wrinkle powder coat finish and a Biltmore Cherry wood laminate top, this rack bridges the gap between a utilitarian equipment enclosure and a presentation-ready mobile cart — making it the right call for boardrooms, auditoriums, command centers, and touring production environments alike.

At 36.35 inches deep and 24.5 inches wide, the BGR-25SA32MDK-E0 (often searched as BGR 25SA32MDK E0) accommodates full-depth AV equipment without compromise. The 29.4-inch usable depth handles virtually every rack-mount chassis in a commercial AV or physical security equipment line. TAA-compliant and manufactured in the USA, it satisfies federal procurement requirements without any special exceptions.

Key Features

• 25 RU / 43.75-inch usable height: Enough space to house a full AV system — receiver, amplifier, matrix switcher, patch panels, and a UPS — without stacking units into a second rack. That consolidation matters when the rack is rolling between rooms or venues.
• 1,100 lb UL-listed load capacity: The UL rating is not a marketing figure — it is a tested structural limit under controlled conditions. At 1,100 lbs you can load this rack fully without worrying about frame deformation, even with heavy broadcast-grade equipment or dense server-style AV hardware.
• 29.4-inch usable depth (36.35-inch total depth): Full-depth equipment — deep power amplifiers, network switches with rear cable management, and similar chassis — mounts cleanly without forcing cable compression at the rear door. The 6.95 inches of rear space beyond the usable zone handles cabling and connector tails.
• Steel construction with black wrinkle powder coat: Powder coat on steel is the correct finish choice for a mobile rack — it resists contact scuffs and marks from door edges and cables in a way that painted surfaces do not. Wrinkle texture further masks minor surface wear over time.
• Biltmore Cherry wood laminate top: The laminate top serves a practical function beyond aesthetics — it provides a stable surface for a monitor or control tablet without requiring a separate shelf. In presentation environments, this eliminates one more accessory to manage.
• Monitor mounting support: Monitor mounting capability is built in, which matters when the rack needs to display a source directly rather than routing signal to a separate display. Confirm mounting arm compatibility with your specific monitor weight and VESA pattern against Middle Atlantic specifications.
• Forward rackrail with forward-compatible design: The forward rackrail configuration simplifies front-of-rack equipment installation. Forward compatibility means this frame accepts Middle Atlantic's current and future rail accessories without a frame replacement — useful if the installation is likely to evolve over its service life.
• Front and rear doors with 25mm x 150mm swing handles: Both doors are included. Front door is plexi (acrylic), allowing equipment LED status to be visually confirmed without opening the rack — a real operational advantage during live events or active system monitoring. Rear door closes off cable access to prevent inadvertent disconnections during movement.
• TAA-compliant, US-manufactured: Federal Ops country of origin is USA. TAA compliance is verified for this SKU, which is a hard procurement requirement for federal, state, and GSA-schedule contracts.

Integration and Compatibility

The BGR-25SA32MDK-E0 uses standard 19-inch panel width (EIA-310 rack standard), making it compatible with the full range of 19-inch rack-mount equipment across AV, networking, and physical security product lines. The forward rackrail design is compatible with Middle Atlantic's BGR accessory ecosystem, including cable management panels, blanks, and shelf accessories. If your installation requires rear rail support for heavy equipment, verify that any add-on rear rail kit is ordered separately — the base configuration uses forward rail only.

At 204 lbs unloaded (229 lbs shipping weight), this rack requires two-person handling during installation and positioning. Factor floor load limits into placement planning when deploying in raised-floor environments or older structures.

Frequently Asked Questions

Q: Is the BGR-25SA32MDK-E0 TAA compliant for federal procurement?

A: Yes. The BGR-25SA32MDK-E0 is TAA-compliant with Federal Ops country of origin listed as USA. It satisfies federal and GSA-schedule procurement requirements.

Q: What is the verified load capacity of the BGR-25SA32MDK-E0?

A: The BGR-25SA32MDK-E0 carries a UL-listed load capacity of 1,100 lbs (499 kg). This is a tested structural rating, not a nominal estimate.

Q: Does the BGR-25SA32MDK-E0 include both front and rear doors?

A: Yes. Both a front plexi (acrylic) door and a rear door are included. The plexi front allows visual status checks of equipment LEDs without opening the rack.

Q: What is the usable rack depth on the BGR-25SA32MDK-E0?

A: Usable depth is 29.4 inches (74.7 cm). Total enclosure depth is 36.35 inches (92.3 cm), leaving additional clearance behind mounted equipment for cable management.

Q: Does the BGR-25SA32MDK-E0 support monitor mounting?

A: Yes. Monitor mounting is supported. Confirm your specific monitor arm or mount accessory weight and VESA compatibility with Middle Atlantic's accessory specifications before ordering.

Q: What finish and material is the BGR-25SA32MDK-E0 constructed from?

A: The frame is steel with a black wrinkle powder coat finish. The top panel is a Biltmore Cherry wood laminate. The rack rail uses Middle Atlantic's forward rackrail design.