Middle Atlantic BGR-25SA32MDK-D0 25U Mobile AV Rack with Plexi Door and Walnut Heights Top
Overview
The Middle Atlantic BGR-25SA32MDK-D0 is a 25U mobile steel rack designed for demanding AV, broadcast, and security integration environments where load capacity, cable management depth, and long-term forward compatibility all matter. At 1,100 lbs UL-listed load capacity inside a 24.5-inch-wide chassis, this unit handles fully loaded multi-amplifier, server, or NVR buildouts without structural concern. The steel black wrinkle powder coat finish, 29.4 inches of usable depth, and dual front/rear door configuration make the BGR-25SA32MDK-D0 a field-deployable rack for touring production, corporate AV installs, and enterprise security control rooms alike. This unit ships from USA manufacturing and carries TAA compliance — a hard requirement for federal, DoD-adjacent, and GSA-sourced projects.
Key Features
- 1,100 lb UL-Listed Load Capacity: With the UL load rating verified at 1,100 lbs (499 kg), you can fully populate all 25 rack units with heavy amplifiers, power distribution, or high-density NVR/server hardware without guessing at structural limits. UL listing means the figure is tested and certified — not a marketing estimate.
- 25 Rack Units / 43.75 in Usable Height: 25U gives you room to run a complete system — NVR stack, power distribution, patch panels, and processing — without compromising cable access. The 43.75 inches of usable interior height leaves enough vertical clearance for structured cabling and airflow accessories between units.
- 29.4 in Usable Depth: The 29.4-inch usable depth (74.7 cm) accommodates full-depth 1U/2U servers and large-format NVR chassis without forcing rear cable management to compete with equipment backplates. Total external depth is 36.35 inches, so verify floor plan clearance before positioning in tight control rooms.
- Forward Rackrail Configuration: The forward rackrail positions equipment toward the front of the enclosure, keeping the rear zone open for cabling and rear-access card slots. This matters in mobile deployments where rear cable access is limited once the rack is positioned.
- Dual Front and Rear Doors: Both front and rear doors are included. The front plexi door allows visual status checks — power indicator LEDs, drive activity lights — without opening the enclosure. The rear door protects cabling and rear-panel connections while remaining quickly accessible for field service.
- Walnut Heights Wood Laminate Top: The wood laminate top provides a finished work surface for monitors, small consoles, or documentation — practical in broadcast and live-event contexts where surface real estate is at a premium during setup and operation.
- Monitor Mounting Capability: Built-in monitor mounting support means you can integrate a display directly into the rack rather than sourcing a separate stand or arm — reduces footprint in tight rooms and simplifies cable routing to an on-rack display.
- 25mm x 150mm Swing Handle: The swing handle is sized for controlled maneuvering of a loaded rack. At 204 lbs product weight (92.5 kg) before equipment loading, the handle geometry matters — this is not a unit to reposition casually once loaded.
- TAA Compliance / US Manufacture: Country of origin is USA, and the unit is TAA compliant. For government integrators, this removes the compliance verification step that delays procurement on foreign-sourced enclosures. TAA compliance is listed as UL Listed on this SKU.
- Forward Compatible Design: Middle Atlantic's forward compatibility means future accessory upgrades — rails, ventilation panels, cable managers — will fit this chassis without requiring a full enclosure replacement. Reduces lifecycle cost on long-term installs.
Integration and Compatibility
The BGR-25SA32MDK-D0 uses a standard 19-inch (48.3 cm) panel width rackrail, compatible with EIA-310 rack equipment across all major manufacturers. The 25U space and 29.4-inch usable depth are sufficient for full-depth rack-mount servers, high-channel NVRs, and enterprise switching hardware. The forward rackrail design is specifically suited for environments where rear cable access is limited or where structured cabling must be routed before equipment installation is finalized. At 24.5 inches external width, this rack fits standard rack furniture rollout footprints. Monitor mounting is supported natively — no additional adapter required for compatible Middle Atlantic monitor arms or third-party VESA mount accessories. As a mobile unit, it is intended for use on a hard, level surface; confirm caster capacity versus total loaded weight before deployment on elevated platforms or soft-surface venues. The unit ships at 229 lbs — factor freight handling into site logistics for install teams working solo or in tight load-in corridors.
Frequently Asked Questions
Q: Is the BGR-25SA32MDK-D0 TAA compliant?
A: Yes. The BGR-25SA32MDK-D0 is TAA compliant and manufactured in the USA, making it eligible for GSA and federal procurement where Trade Agreements Act compliance is required.
Q: What is the UL-rated load capacity of this rack?
A: The UL-listed load capacity is 1,100 lbs (499 kg). This is a tested and certified figure, not a nominal rating.
Q: How much usable depth does the BGR-25SA32MDK-D0 provide for equipment?
A: The usable depth is 29.4 inches (74.7 cm). Total external depth is 36.35 inches, so plan site clearance accordingly.
Q: Does this rack include both front and rear doors?
A: Yes. Both a front plexi door and a rear door are included. The plexi front allows visual indicator checks without opening the enclosure.
Q: What is the actual product weight of the BGR-25SA32MDK-D0 before loading?
A: The product weight is 204 lbs (92.5 kg). Shipping weight is 229 lbs (103.9 kg), which includes packaging.
Q: Can a monitor be mounted directly to this rack?
A: Yes. The BGR-25SA32MDK-D0 includes monitor mounting support as a native feature, eliminating the need for a separate display stand in most installations.
The spec that stands out on the BGR-25SA32MDK-D0 is the UL-listed 1,100 lb load rating at 25U — that is not a soft manufacturer claim, it is a tested structural certification. When I am speccing a rack for a fully loaded security control room or a dense broadcast build with heavy amplifiers and processing, that number removes a liability question that informal load ratings cannot answer.
Technical Highlights:
- 29.4 in Usable Depth: Accommodates full-depth 1U/2U servers and large-format NVR units without routing rear cables around equipment backplates — the remaining 6.95 inches between usable and external depth gives structured cabling room to exit cleanly.
- 204 lb Tare Weight: At 204 lbs empty (92.5 kg), this is a heavy enclosure before a single unit goes in. That mass is a structural asset on a mobile rack — it resists tipping under asymmetric loading — but factor it into freight logistics and floor load ratings for raised-floor environments.
- TAA / USA Manufacture: For any federal, DoD-adjacent, or GSA-sourced project, this SKU checks the compliance box at the enclosure level. That eliminates one line item from the procurement compliance review.
Deployment Considerations:
- Total shipping weight is 229 lbs — solo installation is not realistic. Two-person minimum for unboxing and positioning, especially in tight load-in corridors or freight elevator transitions.
- External depth of 36.35 inches means standard 30-inch-deep rack bays will not fit this unit — verify floor plan clearance before finalizing room layout, particularly in retrofits where the rack footprint was designed around a shallower enclosure.
The BGR-25SA32MDK-D0 is the right call for touring production racks, enterprise security command centers, and government AV installs where load certification, TAA compliance, and long-term forward compatibility are non-negotiable — not for light-duty or space-constrained fixed installs where a shallower, lighter enclosure would serve better.
