CyberPower PDU15B2F8R 10-Outlet 1U Rackmount Basic PDU
The CyberPower PDU15B2F8R is a 1U rackmount basic power distribution unit designed for high-density equipment installations where clean power distribution and physical access matter. It delivers 15A (derated to 12A continuous) across 10 NEMA 5-15R outlets—2 front-facing for test gear or portable devices, 8 rear-facing for permanent rack equipment. The 15-foot input cord with NEMA 5-15P plug offers flexible conduit routing in racks up to 20U from floor-mounted UPS or wall outlets. Metal housing, 15A circuit breaker overload protection, and unfiltered electrical pass-through make this a workhorse PDU for integrators managing NVR racks, PoE switch stacks, A/V control rooms, and network closets where budget and simplicity trump remote monitoring.
Key Features
- 10 NEMA 5-15R outlets (2 front, 8 rear) — front outlets for temporary gear, rear for clean cable management on permanent installs
- 15A input (derated to 12A continuous) with 15-foot NEMA 5-15P cord — reach floor UPS or distant wall outlets without extension cords
- 1U rackmount form factor (17.5" wide) — fits standard 19" racks; vertical and under-counter mounting holes included
- 15A circuit breaker — manual reset overload protection prevents nuisance trips from inrush current on boot
- Metal housing — superior EMI shielding and physical durability vs. plastic PDUs in high-vibration server room environments
- UL62368 and UL60950-1 listed — meets NEC and CEC requirements for commercial A/V and IT installations
- Limited lifetime warranty — CyberPower stands behind the build for the life of the product
Capacity and Load Planning. The PDU15B2F8R is rated for 15A input but derated to 12A continuous per NEC 80% rule—this translates to 1,440W at 120V. In practice, you can safely run 8–10 PoE switches (each drawing 80–120W), or 2–3 enterprise NVRs with spinning drives (300–500W each), or a mixed rack with edge NVR + managed switch + small UPS + monitor. The rear 8-outlet bank handles permanent infrastructure; front 2-outlet strip gives you hot access for laptops, test monitors, or swap-out power bricks without reaching behind the rack. The 15-foot cord is long enough to route from mid-rack to a floor-standing UPS or wall outlet 12 feet away, eliminating the daisy-chained extension cords that trip inspectors and create single points of failure. Unfiltered pass-through means no MOVs or capacitors to degrade—what comes in is what goes out, making this ideal for downstream UPS or conditioner setups where you want the PDU purely as a splitter.
Installation and Mounting Flexibility. Standard 1U 19-inch rackmount with rear keyholes and front bracket holes—mount horizontally in any rack with included hardware, or use vertical mounting holes for zero-U installation on rack verticals when horizontal space is tight. Under-counter holes let you bolt it beneath A/V credenzas or control desks where the front 2 outlets become service ports and the rear 8 feed hidden gear. The metal chassis adds 4 pounds but the rigidity matters when you're plugging and unplugging C13 or barrel connectors weekly—plastic housings crack at the screw bosses after a year of field use. Circuit breaker sits on the front bezel for instant access during troubleshooting without unracking; breaker is mechanical (not electronic) so it never needs firmware or calibration and works even when upstream power is partial-voltage brown.
Deployment Context. Integrators deploy the PDU15B2F8R in commercial security NVR racks (24–64 camera installs where the recorder, PoE switch, and small UPS all live in a 12U wall-mount), A/V control rooms (DSPs, matrix switchers, streaming encoders), and network closets (edge switch + access point controller + VoIP gateway). It's spec'd for 0–10,000 ft elevation and 32–95°F operating range, making it suitable for climate-controlled server rooms and unconditioned telecom closets in the southern U.S. or high-altitude mountain resorts. The 0–95% non-condensing humidity tolerance handles coastal installations where morning condensation is routine. RoHS compliance clears municipal and federal procurement green requirements.
UL62368 and UL60950-1 dual listing covers both new IT/A/V installs (62368 standard) and legacy telecom retrofits (60950-1 grandfather). NEC inspectors recognize both marks. The limited lifetime warranty is transferable and requires no registration—CyberPower replaces failed units with proof of purchase, and the metal build means mechanical failures are rare outside of breaker fatigue after 10+ years of monthly resets. For integrators managing 50+ rack installs annually, standardizing on the PDU15B2F8R simplifies inventory (one SKU for 90% of small-rack jobs), reduces callback risk (no nuisance GFCI interaction, no LED failure, no network card to configure), and keeps project cost predictable when the line item is "basic rackmount PDU" and the client doesn't need switched or metered features they'll never use.
