CyberPower PDU15B8R 8-Outlet 1U Rackmount Power Distribution Unit
The CyberPower PDU15B8R delivers reliable 120V power distribution for rack-mounted equipment in server rooms, network closets, and AV installations. This 1U basic PDU provides eight NEMA 5-15R outlets fed from a single 15-foot NEMA 5-15P input cord, with 15A circuit breaker protection and metal housing built for continuous-duty environments. Designed for integrators who need straightforward, reliable power delivery without the complexity or cost of managed PDUs.
Key Features
- Eight rear-mounted NEMA 5-15R outlets for standard 120V equipment power
- 15A circuit breaker protection prevents overload damage to connected devices
- 15-foot input cord with NEMA 5-15P plug provides installation flexibility
- 1U rackmount form factor fits standard 19-inch racks, with 0U vertical and under-counter mounting options
- Metal housing withstands the physical demands of commercial rack environments
- UL62368 and UL60950-1 safety certification for commercial installations
- Unfiltered pass-through design for simple, reliable power distribution
- Limited Lifetime Warranty from CyberPower
The PDU15B8R operates on unfiltered electrical pass-through architecture — incoming 100-125VAC power flows directly to the eight rear-mounted outlets with minimal internal resistance. The 15A circuit breaker is derated to 12A continuous load per UL guidelines, which translates to roughly 1,440 watts of safe, sustained distribution capacity. This makes it appropriate for typical rack scenarios: a 16-channel NVR (~50W), a PoE+ switch (~120W), a small server (~300W), and several cameras or encoders (~10-30W each) can coexist comfortably within the thermal and electrical margins. The breaker is a front-accessible manual reset type — no fuses to replace, no downtime sourcing parts. If a fault trips the breaker, you flip it back and resume operation.
Installation flexibility is a practical strength. The 1U rackmount bracket mounts in any standard EIA-310-compliant 19-inch rack. The 15-foot cord — longer than the 6-8 foot cords common on budget PDUs — means you can position the PDU where it makes sense for cable management rather than where the wall outlet dictates. If rack space is tight, the unit supports 0U vertical mounting (hangs alongside the rack frame) or under-counter mounting for workbench or console scenarios. The eight outlets are rear-facing and spaced for standard power adapters, though oversized wall warts may require every-other-outlet spacing. In security and AV deployments, this PDU often lives in the rack alongside NVRs, switches, and encoder stacks, consolidating power delivery and reducing the number of wall outlets occupied. For datacenter or server-room use, it serves as a secondary distribution point for non-critical peripherals — KVMs, console servers, management interfaces — freeing primary PDU capacity for compute and storage loads.
Capacity planning with basic PDUs requires attention to total amperage rather than individual outlet limits — the 15A breaker protects the entire unit, not each outlet independently. If you're powering a mix of PoE switches, small servers, and surveillance equipment, add up the nameplate amperage (or divide watts by 120V) and keep the total below 12A continuous. For installations with variable or unknown loads, a plug-in wattmeter on the input side provides visibility into actual draw. In practice, the eight-outlet count and 12A derated capacity align well with small-to-midsize installations: a typical surveillance rack with one NVR, one PoE switch, one small UPS (fed from a separate circuit), and ancillary devices fits comfortably. For larger deployments or higher-density racks, multiple PDUs on separate circuits provide both capacity and redundancy.
The PDU15B8R is UL62368 and UL60950-1 certified, meeting North American safety standards for commercial IT and AV installations. RoHS compliance ensures restriction of hazardous substances in construction materials. CyberPower backs the unit with a Limited Lifetime Warranty, reflecting the simple, passive design with few wear components. For integrators who need to distribute 120V power across eight devices in a rack without the cost or complexity of remote monitoring, environmental sensors, or per-outlet switching, the PDU15B8R is a straightforward, code-compliant choice that does the job and stays out of the way.
