CyberPower PDU15B10R 10-Outlet Basic Rackmount Power Distribution Unit
The CyberPower PDU15B10R delivers reliable rack power distribution for network closets, server rooms, and AV installations where switch-free basic distribution meets the job. Ten rear-facing NEMA 5-15R outlets arranged along a compact 1U metal chassis provide 15A capacity (12A derated per NEC) through a 15-foot input cord—enough reach to bridge typical rack-to-wall distances without extension adapters. No switches, no indicators, no points of failure: this PDU focuses on delivering power where installers need it, backed by CyberPower's limited lifetime warranty.
Key Features
- 10 Rear NEMA 5-15R Outlets — rear-facing configuration keeps cables out of sight while maximizing usable rack depth
- 15A Capacity, 12A Derated — handles typical network switch, small server, and AV processor loads within safe continuous operating range
- 15-Foot Input Cord — eliminates extension cords and adapters in most rack-to-wall scenarios; NEMA 5-15P plug with cord retention tray
- Circuit Breaker Protection — 15A breaker provides overload protection and manual reset without replacing fuses
- Switch-Free Design — no power switches means fewer failure points and simpler deployment for always-on infrastructure
- Flexible Mounting — 1U rackmount (included brackets), 0U vertical, undercounter, or wall mount configurations supported
- Metal Housing — durable steel construction withstands the rigors of equipment room environments
- UL Listed, RoHS Compliant — meets UL62368 and UL60950-1 safety standards for commercial deployment
Rack power distribution breaks into two camps: managed PDUs with per-outlet switching and monitoring, and basic PDUs that do one thing—deliver power—without added complexity or cost. The PDU15B10R sits firmly in the latter category. It's the right choice when you need to power a stack of PoE switches, a handful of NVRs, or a mix of network and AV gear in a single rack, and you don't need per-outlet control or remote monitoring. The 15A input capacity supports up to 12A continuous load (80% derating per NEC Article 210.19(A)(1)), which translates to roughly 1,440VA at 120V—adequate for most small to mid-size rack installations. The rear-facing outlet configuration keeps power cords behind the equipment plane, preserving usable rack depth and maintaining a cleaner front appearance.
Installation scenarios matter. The 15-foot input cord isn't an arbitrary spec—it's the difference between reaching a wall outlet from a floor-standing rack without daisy-chaining extension cords (a common code violation) and having to improvise. The included cord retention tray prevents accidental disconnects during equipment moves or cable management adjustments. Mounting brackets ship configured for standard 1U rackmount installation, but the hardware supports 0U vertical mounting alongside the rack frame, undercounter mounting in podiums or lecterns, and wall mounting in network closets where rack space isn't available. The metal chassis dissipates heat better than plastic alternatives and holds up to repeated mounting and cable strain.
Circuit breaker protection provides a manual reset point when loads exceed 15A—preferable to hunting for blown fuses in older designs. The switch-free topology eliminates the most common failure mode in basic PDUs (failed rocker switches) and removes a potential point of accidental shutoff during equipment moves. Network-grade plugs and outlets use commercial-grade retention force to prevent vibration-induced disconnects. Operating range spans 32-95°F and 0-95% non-condensing humidity, covering the environmental conditions in most equipment rooms, though CyberPower doesn't rate this unit for outdoor or uncontrolled-environment deployment. UL62368 and UL60950-1 listings satisfy commercial building inspection requirements. RoHS compliance clears procurement restrictions in environments with environmental purchasing mandates.
The PDU15B10R is a straightforward answer to a straightforward problem: you have ten devices, one rack, and one 120V circuit. If your deployment needs per-outlet switching, remote monitoring, or higher amperage, CyberPower's switched and metered PDU lines address those requirements. If you just need power distribution without the complexity, this unit delivers exactly that—ten outlets, one breaker, zero compromises on build quality or compliance. Limited lifetime warranty.
