Middle Atlantic DTRK-1218 12U Steel Desktop Rack
Overview
The Middle Atlantic DTRK-1218 is a 12U open-frame desktop rack built for tabletop or credenza installations where floor space is tight but you still need organized, rack-mounted gear. At 18.5 inches of usable depth, the DTRK-1218 handles most 1U–2U NVRs, patch panels, and media converters without overhang. The 300 lb UL-rated load capacity means you can fully populate all 12 spaces with dense hardware and not worry about structural limits — relevant when stacking multiple 2U appliances. The metallic gray powder coat finish blends into AV and IT environments without the industrial look of open rack frames. TAA-compliant construction sourced from Mexico qualifies this rack for government and federally funded deployments where country-of-origin documentation is required. For integrators building compact NVR-based surveillance systems or AV control rooms on a desk surface, this is a purpose-fit enclosure — not a general-purpose shelf.
Compatibility
The DTRK-1218 accepts any standard 19-inch rack-mount equipment using 10-32 threaded rails — the industry-standard thread for 1U and 2U appliances including Middle Atlantic accessories, patch panels, 1U NVRs, KVM switches, and fiber distribution units. The 18.5-inch usable depth accommodates shallow to mid-depth equipment; verify that your deepest appliance does not exceed 18.5 inches measured from the front rail face to the rear. Equipment requiring deeper than 18.5 inches — such as full-depth servers or high-port-density switches — will need a deeper rack enclosure. For IP camera system head-end builds, confirm that your NVR or encoder chassis fits within this depth before specifying. The 12U height suits compact deployments; larger builds requiring 16U or more should reference other enclosures in the rack mount equipment lineup. No doors or side panels are included, so airflow is unrestricted — an advantage for heat-generating appliances in non-public spaces.
Installation Notes
Overall footprint is 21.38 in wide × 22.88 in tall × 19.5 in deep; confirm your surface or furniture cutout accommodates the full chassis before ordering. Shipping weight is 41.4 lbs — plan for two-person handling during initial placement. Rails are 10-32 threaded; use proper 10-32 rack screws and cage nuts appropriate to your equipment's mounting hardware. No side panels or rear cable management are included — budget for cable management accessories separately if a clean install is required.
