Middle Atlantic 7 Space 18IN. Deep Desktop Rack Steel Metallic Grey Powder Coat Finish - DTRK-718

Middle Atlantic DTRK-718 7U 18-Inch Deep Desktop Rack

Overview

The Middle Atlantic DTRK-718 is a 7U steel desktop rack built for installations where floor or wall space is unavailable and rack-mounted gear needs to live on a work surface or equipment shelf. At 21.38 in wide × 14.13 in tall × 19.5 in deep with 18.5 in of usable depth, it accommodates most 1U–2U appliances — NVRs, network switches, access control panels, and similar shallow-chassis equipment — without requiring a full-height enclosure. The 300 lb UL-rated load capacity means you're not limited to lightweight gear; a fully populated 7U of moderate-density equipment sits well within spec. Metallic gray powder-coat finish over steel construction keeps it presentable in a client-facing AV or security head-end room. TAA compliant with Mexico as the country of origin — relevant for government and federally funded projects requiring Buy American Act compliance.

Compatibility

The DTRK-718 uses standard 10-32 threaded rack rails, which accept the full range of Middle Atlantic rack accessories — shelves, blanks, cable management panels, and power strips — as well as any EIA-310-compliant 19-inch rackmount equipment. It fits standard 1U through 7U network video recorders, PoE network switches, UPS units, and access control head-end hardware sized within the 18.5 in usable depth. Equipment deeper than 18.5 in will not fit flush; verify chassis depth before ordering. Compatible with Middle Atlantic's DTRK accessory line including rack shelves and lacing bars designed for the DTRK series. Pairs naturally with rack accessories such as vented blanking panels and horizontal cable managers to keep a desktop installation clean and serviceable. Useful in rack planning scenarios where a compact, self-contained head-end is needed without committing to a full open-frame or enclosed floor rack.

Installation Notes

Desktop placement requires a surface capable of supporting the rack's loaded weight — factor in the 300 lb UL capacity plus the rack's own steel frame. The 10-32 rail thread accepts standard cage nuts if you're mounting equipment that ships with cage-nut hardware. Width of 21.38 in accounts for the side panels beyond the 19 in rail span; confirm clearance on the intended surface. No rackmount rail conversion is needed — rails are fixed and pre-tapped at 10-32.