Panduit RAFC10WH-X Surface Raceway Right Angle Fitting
The Panduit RAFC10WH-X right angle fitting solves the bend radius problem at every 90-degree corner in LD10 surface raceway installations. TIA/EIA standards mandate a minimum 1-inch bend radius for Cat6 and Cat6A cables—this fitting maintains that radius while transitioning cleanly around corners in commercial offices, retail spaces, and light industrial environments. One-piece hinged PVC construction snaps onto LD10 or LDPH10 raceway without tools, and the white finish matches Panduit's Pan-Way LD10 channel for a continuous, professional appearance across conference rooms, open-plan workstations, and perimeter walls.
Key Features
- 1-inch bend radius control maintains TIA/EIA compliance for Cat6/Cat6A horizontal cabling
- Snap-on hinged design—no screws or adhesive required at the fitting itself
- White PVC matches LD10/LDPH10 raceway finish for seamless corner transitions
- UL94V-0 flame rating and FT4 listed for plenum-alternative routing
- Adhesive backing on base raceway sections allows repositioning during layout
- 10-pack quantity covers typical open-office zone or conference room build-out
LD10 raceway runs are common in post-construction network expansions where in-wall cabling isn't feasible—tenant improvement projects, leased space fitouts, and retrofit AV installations. The RAFC10WH-X handles every perimeter turn and column wrap without kinking copper pairs or crushing fiber buffer tubes. The one-piece hinged cover opens for mid-run cable additions, then snaps closed to maintain the protected pathway. Installers can stage fittings dry, verify the layout, then commit with the included adhesive backing on the base channel. This reduces rework compared to permanent-mount systems and supports future moves-adds-changes without drywall repair.
Meets TIA/EIA-568 pathway requirements and UL Listed under File E60955. Compatible exclusively with Panduit LD10 and LDPH10 raceway profiles—verify base channel part numbers before ordering fittings. Each 10-pack ships with the fittings only; base raceway sections, end caps, and mounting boxes are sold separately. For installations requiring more than 10 corners, bulk cartons of 50 are available under the same MPN. Standard lead time applies for stock orders; consult your distributor for project quantities exceeding 500 fittings.
