Zebra CRD-NGTC5B-5SC5D 5-Slot Charging Cradle Kit
Overview
The Zebra CRD-NGTC5B-5SC5D is a multi-device charging cradle designed for enterprise deployments of Zebra TC53 and TC58 mobile computers. This 5-slot configuration reduces the physical footprint of your charging infrastructure while enabling simultaneous charge and data synchronization across your device fleet — a practical necessity in warehouse, logistics, and field service operations where downtime directly impacts productivity. The kit ships with power supply and connection cables, ready to integrate into existing Zebra device ecosystems.
Key Features
- 5-Slot Simultaneous Charging: Charge five TC53 or TC58 units at once. In a warehouse environment running multiple shifts, this density cuts the number of charging stations you need to maintain, reducing both equipment cost and floor space consumption.
- Integrated Synchronization: Cradle connections support data sync alongside charging. This matters when your devices are running work management software or inventory systems — you can refresh the device and push updates during the charge cycle without requiring a separate dock connection.
- TC53 and TC58 Compatibility: Supports both Zebra TC-series models across this generation. If you run a mixed fleet of these two form factors, a single cradle type simplifies spare-parts inventory and training.
- Compact Multi-Unit Design: Consolidating five charging ports into one unit means you're not spreading docking infrastructure across multiple tables or walls. This matters in tight warehouse backrooms or retail receiving areas where real estate is constrained.
- Included Power and Cables: The kit includes power supply and connection cables, so you're not hunting for compatible connectors or power bricks after purchase. Unbox and deploy.
- Centralized Charging Workflow: In field service or distribution operations, a dedicated multi-slot cradle becomes the hub where devices are staged for charge and sync at shift start and end. This creates a predictable, auditable device-readiness process instead of ad-hoc charging scattered across the site.
Integration and Compatibility
The CRD-NGTC5B-5SC5D integrates into Zebra's TC-series ecosystem without modification. Deploy this in any environment where you're already running TC53 or TC58 computers — no special configuration or middleware required. If you operate a mixed-generation fleet or multi-device environment, verify your device model compatibility before purchasing; this cradle is purpose-built for these two models only.
For larger deployments requiring charge management across dozens of devices or multiple locations, assess whether you need multiple cradles or a more centralized battery-charging solution. This is a five-unit cradle, not a carousel or automated system — plan accordingly for fleet size.
What's in the Box
- 1x 5-slot charging cradle
- 1x Power supply
- Connection cables
When to Choose a Different Approach
If you operate fewer than five TC53/TC58 devices regularly, a single-slot or dual-slot cradle may be more practical and cost-effective. If your deployment spans multiple buildings or operates on extended shifts where devices need to charge in parallel with active use, consider whether a battery-swap program paired with external chargers would serve your operation better. If you run a much larger fleet (50+ devices), evaluate whether a centralized charging cart with higher capacity would reduce management overhead.
Karl WilsonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The CRD-NGTC5B-5SC5D is a straightforward multi-slot charging solution for environments where you need five TC53 or TC58 devices ready at the same time. No surprises here — it's a stationary cradle with integrated power, not a mobile charger or battery-management system. The real value is density and predictability: five devices, one power feed, one corner of the room.
Technical Highlights:
- 5-Slot Configuration: Handles simultaneous charge and sync of five units, reducing infrastructure footprint by roughly 80% compared to five separate single-slot cradles.
- Included Power Supply and Cables: No hunting for compatible accessories — everything required for deployment ships in the box, shortening commissioning time.
- TC53 and TC58 Native Support: Purpose-built for these two models; no adapters or workarounds needed.
Deployment Considerations:
- This is a fixed charging station, not portable. Site it where devices naturally return for shift-end or midday refreshes — typically a warehouse backroom, retail receiving area, or service van base.
- Charge time depends on battery condition and device firmware, not the cradle itself. Plan for typical 2-4 hour refresh cycles during shift changes; if you need faster turnaround, stock spare batteries or additional cradles.
- The cradle supports synchronization, but you'll still need your work-management backend (ERP, WMS, dispatch system) running to push data during the sync window. Don't treat the cradle as a data bridge — it's just the physical interface.
Best suited for warehouse and logistics operations running 5–25 TC devices where a single centralized charging point supports predictable shift patterns. If your fleet is smaller (1–3 devices) or much larger (50+), this cradle sits in an awkward middle ground; assess single-slot or cart-based alternatives first.
Frequently Asked Questions
Q: Does the CRD-NGTC5B-5SC5D work with both TC53 and TC58 devices simultaneously?
A: Yes. The cradle is designed to support both models. You can mix TC53 and TC58 units in the same five-slot station without any configuration changes.
Q: What power input does the cradle require?
A: The kit includes a dedicated power supply. Plug the supplied power supply into a standard outlet; no PoE or auxiliary power sources are required. The specifications for the power supply itself (voltage, amperage, connector type) are detailed in the datasheet.
Q: Can I charge other Zebra device models in this cradle?
A: No. The CRD-NGTC5B-5SC5D is designed specifically for TC53 and TC58 mobile computers. Other Zebra device models require their own compatible cradles.
Q: How long does it take to fully charge five devices?
A: Charge time depends on the current battery state and device firmware, not the cradle itself. Consult your TC device documentation for typical charge-cycle duration; plan for 2–4 hours as a general guideline for a full refresh from low battery.
Q: Is synchronization automatic, or do I need to configure it separately?
A: The cradle provides the physical connection for sync. Whether data actually syncs depends on your work-management software or MDM configuration. Consult your system administrator or Zebra support for sync protocol setup.
Q: What happens if one slot fails — can I still use the other four?
A: The cradle is a fixed multi-slot unit. If one slot develops a problem, the entire cradle is typically removed from service. For mission-critical operations, stock a spare cradle or use a second station as redundancy.
