Zebra CRD-NGTC5-5SC5D 5-Slot Charge-Only Cradle
Overview
The Zebra CRD-NGTC5-5SC5D is a dedicated five-slot charging cradle engineered for Zebra TC53 and TC58 rugged mobile computers. This charge-only design—no communications or data sync capability—is purpose-built for warehouse, logistics, and field service environments where device turnover is high and centralized charging is essential. The five-slot layout eliminates single-device chargers and reduces the footprint of your charging infrastructure while supporting simultaneous top-up of five units. This is the cradle you deploy when your primary concern is uptime and you're managing device rotations in high-velocity operations.
Key Features
- Five simultaneous charge ports: Run five TC53 or TC58 devices in parallel, cutting crew wait time between shifts. In a 24/7 warehouse operation running two or three device teams per shift, this eliminates the bottleneck of single-bay chargers.
- Charge-only architecture: No USB data lines, no network integration, no software overhead—just power delivery. This means no configuration headaches, no driver updates, and lower risk of data exfiltration or unauthorized sync. Simpler is safer in high-traffic environments.
- TC53 and TC58 compatibility: Both models fit the same cradle. If you're running a mixed fleet of 53s and 58s (common in large warehouses upgrading over time), a single CRD-NGTC5-5SC5D handles both without retraining or additional SKUs.
- Compact footprint: Five slots in a single unit save desk or cart space compared to five individual chargers. Critical when charging stations are tucked into picking lines or break rooms.
- Integration into device management workflows: The cradle fits naturally into inventory and fulfillment operations—no special software required. Devices charge passively while your team rotates units between shifts.
Integration & Compatibility
The CRD-NGTC5-5SC5D integrates directly with Zebra TC-series mobile computers and is compatible with existing device management and fleet provisioning processes. Because it is charge-only, it does not require network configuration, VMS integration, or custom cabling—standard mains power is the only external requirement. The five-slot design is ideal for staging areas, vehicle docks, and central charging hubs in logistics and warehouse operations.
Deployment Scenarios
This cradle is most effective in high-volume device rotation environments: warehouse fulfillment centers rotating devices between shifts, last-mile delivery operations with multi-team rotations, or field service companies managing shared device pools. If devices are stationary or used continuously by a single person, a single-slot charger or dock may suffice. If you need simultaneous charging of more than five units, consider scaling to multiple CRD-NGTC5-5SC5D units or contact your provisioning team for multi-cradle power distribution options.
Frequently Asked Questions
Q: Does the CRD-NGTC5-5SC5D support data synchronization or USB file transfer?
A: No. The CRD-NGTC5-5SC5D is charge-only. It provides power to the devices but does not support data transfer, sync, or communications. If you need simultaneous charging and data dock functionality, consult your Zebra specialty retailer for combo cradle options.
Q: Can I use the CRD-NGTC5-5SC5D with other Zebra mobile computer models?
A: The CRD-NGTC5-5SC5D is designed for TC53 and TC58 rugged mobiles only. Other models may not fit or charge correctly. Verify compatibility with your device model before ordering.
Q: What power input does the cradle require?
A: The CRD-NGTC5-5SC5D requires standard mains AC power (nominal 100–240V, 50–60 Hz). Check your regional power specification in the product datasheet for exact requirements. A single wall outlet supports the entire five-slot cradle.
Q: How long does it take to fully charge a TC53 or TC58 from the CRD-NGTC5-5SC5D?
A: Charge time depends on battery capacity and current state of discharge. Refer to the TC53 or TC58 device datasheet for battery specifications and estimated charge duration. The cradle delivers standard Zebra charging current; no fast-charge capability is specified.
Q: Is the CRD-NGTC5-5SC5D suitable for outdoor environments?
A: The cradle is designed for indoor warehouse and logistics facilities. If you require outdoor charging capability, consult your solutions architect or dealer for environmental enclosure options.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The CRD-NGTC5-5SC5D solves a specific operational problem: when you are running multiple shifts or high-frequency device rotation, single-bay chargers become a throughput bottleneck. Five simultaneous slots mean your team doesn't wait for the previous shift to finish topping up their devices. In a 24/7 warehouse or last-mile operation, that translates to predictable device availability and no morning delays because someone's mobile is at 40% charge.
Technical Highlights:
- Charge-only design eliminates sync and data-line complexity: No USB data connector means no accidental file transfers, no software syncs interfering with device provisioning, and no driver updates to manage. For high-security logistics operations, this is a feature, not a limitation. Power delivery is the entire job.
- Five-slot simultaneous charging: In a warehouse or field service scenario, this is the multiplier that matters. If your typical shift rotation requires three to five devices per team, you can fully refresh an entire device set in a single charging cycle without rotating units through a queue.
- TC53 and TC58 compatibility in one SKU: No need to stock two different cradles if you're running a mixed fleet. That simplifies inventory management and reduces capital expense on charging infrastructure, especially if you're in the middle of a device upgrade cycle.
Deployment Considerations:
- Charge-only does mean you cannot use this for firmware updates or bulk configuration transfers—those still require a traditional USB dock or network provisioning. Plan for a separate (possibly single-slot) dock if you have regular fleet configuration needs.
- Five slots may feel like overkill for a small operation (fewer than 20 devices total), but underdimensioning here creates bottlenecks fast. If you have consistent multi-shift rotation, go with the five-slot from day one rather than upgrading later.
Deploy the CRD-NGTC5-5SC5D as your primary charging infrastructure in any warehouse, fulfillment, or logistics operation running two or more shifts on overlapping device schedules. It's the cradle for throughput-critical environments where the goal is zero downtime due to dead batteries, not feature richness.
