Panduit G2X2BL6 Panduct Wide Slot Wiring Duct
The Panduit G2X2BL6 is a 2" x 2" lead-free PVC base wiring duct engineered for data center, telecom, and commercial security installations where cable management density and fire safety cannot be compromised. Its wide slot/finger design delivers greater sidewall rigidity than standard narrow-slot ducts while accommodating variable wire bundle diameters—critical when routing mixed-gauge power, network, and low-voltage security cables in the same pathway. At 6 feet per section with pre-punched mounting holes and UL 94 V-0 flame rating, the G2X2BL6 provides rack-mount and wall-mount installers a code-compliant, field-customizable solution that scales from single-rack deployments to multi-row server or surveillance equipment builds.
Key Features
- 2.0" x 2.0" internal channel (2.25" W x 2.12" H external) handles bundled Cat6A, fiber, 18 AWG power, and coax in a single duct
- Wide slot/finger design increases sidewall rigidity by 40% versus narrow-slot equivalents, reducing sag on horizontal runs
- Upper and lower scorelines enable tool-free finger removal and sidewall section cutouts for mid-run breakouts without compromising duct integrity
- Lead-free PVC construction with UL 94 V-0 flame class and UL Recognized continuous-use rating to 122°F (50°C)
- 6-foot sections with factory-drilled mounting holes on 12" centers simplify alignment and reduce install time
- RoHS, CE, and BABA compliant for federal, GSA, and environmentally regulated projects
- Black finish maintains professional appearance in open-ceiling and exposed-infrastructure installs
- Compatible with Panduit snap-on duct covers (sold separately) for retrofittable cable protection
The G2X2BL6's wide slot/finger geometry solves a persistent challenge in converged infrastructure: maintaining duct rigidity while preserving the flexibility to add or remove cables without duct replacement. Traditional narrow-slot ducts require installers to pre-calculate maximum fill ratio and lock in cable quantities at install—any later additions force duct upsizing or secondary pathways. Panduit's wide slot design spaces fingers farther apart, creating larger openings that accommodate thicker bundles or mixed cable types (shielded Cat6A + LC duplex fiber + 18/2 power for PoE injectors, for example) without bottlenecking at the slot. The wider finger base also increases the moment of inertia along the duct's vertical axis, reducing flex and sag on horizontal 19" rack-mount runs or overhead cable trays where unsupported spans exceed 24 inches. Upper and lower scorelines molded into each finger allow field techs to snap off finger sections with a utility knife, creating custom-width openings for mid-run breakouts to patch panels, PDUs, or device connections—no need to cut the entire duct or leave cables hanging outside the pathway. This field-customization capability is especially valuable in phased deployments where initial cable counts are low but future expansion is planned: install the full 2" x 2" duct today, remove only the finger sections you need now, and retain the option to open additional slots as equipment density grows.
In security and AV system deployments, the G2X2BL6 addresses the specific challenge of routing mixed-voltage cables in NEC Article 725 / 800-compliant pathways. IP camera installations regularly combine Category cable (Class 2 / Class 3 per Article 725), shielded RS-485 for PTZ control, and 18 AWG 2-conductor for auxiliary power or alarm I/O—all of which can legally share a common pathway if the duct maintains physical separation from higher-voltage circuits. The 2" x 2" internal cross-section provides enough vertical stacking space to layer network cables on the bottom, control cables in the middle, and power cables on top, maintaining visual separation during inspections and simplifying troubleshooting when a single cable needs replacement. For access control and intrusion integrators running door strikes, mag locks, and request-to-exit sensors, the duct's continuous 6-foot sections reduce the number of joints and cover seams where cables can snag during pulls—a common failure point in retrofits where existing pathways have tight bends or multiple direction changes. Mounting holes on 12-inch centers align with standard relay rack and server rack vertical rails, allowing installers to secure duct directly to rack uprights without drilling custom holes or using adhesive-backed mounts that fail under cable weight. When wall-mounted, the same hole pattern matches 16-inch on-center wood or metal studs, simplifying fastener placement and ensuring duct remains level across multi-section runs.
UL 94 V-0 flame classification ensures the G2X2BL6 meets the self-extinguishing material requirements in NFPA 70 (National Electrical Code) Article 300.22(C) for ducts installed in environmental air spaces—critical for above-ceiling runs in commercial buildings where HVAC plenums prohibit non-rated cable management products. The lead-free PVC formulation satisfies RoHS and REACH restrictions for installations in California, EU member states, and federally funded projects requiring BABA (Build America, Buy America) compliance, covering GSA, DoD, and infrastructure grant-funded builds. For integrators managing multi-site rollouts or template-based designs, the G2X2BL6's compatibility with Panduit's full line of snap-on covers, end caps, and mounting accessories ensures consistent BOM across projects and reduces the risk of field-fit issues when mixing duct brands. The black finish hides dust accumulation and cable jacket colors in open-architecture server rooms or network closets where duct remains visible post-install, maintaining a clean, professional appearance that meets the same standards as the equipment it supports.
