Wasp I00009488 Wireless 2D Scanner with RS232
Overview
The Wasp I00009488 (WWS752) is a wireless 2D barcode scanner designed for mobile point-of-sale and inventory environments where tethered scanning limits workflow. The RS232 serial interface integrates into legacy POS terminals, cash registers, and warehouse devices that rely on direct serial connections rather than USB or network input. Wireless range eliminates cable runs across retail floors or warehouse aisles, reducing trip overhead for staff and keeping scan data flowing in real time.
Compatibility
The I00009488 pairs with any POS system or device supporting RS232 serial input — check your terminal or register documentation for a free serial port. If your device has no RS232 port, a USB-to-serial adapter can bridge the gap, but test compatibility with your hardware vendor first. The scanner operates as a transparent keyboard wedge; once paired and configured, barcode data appears as keystrokes into the active field on your screen or register display.
Installation Notes
Charge the scanner fully before first deployment — typical cordless operation runs 8–12 hours depending on scan volume. Pair it to your wireless base station following the manufacturer setup guide; most retail environments use standard 2.4 GHz radio frequency, so verify no high-interference equipment (microwave ovens, certain wireless systems) sits directly between scanner and base. Position the base station within open sight line to the scanning area for best range. The RS232 cable connects directly to your terminal's serial port; if the cable is longer than 15 feet, signal degradation may occur — keep the run as short as feasible.
