Labels and Media
Sub categories
Showing Results for Labels and Media
-
Brother
SKU: LBX075001
Brother LBX075001 5 Bay Hat Channel Mounting Plate
5-bay hat channel mounting plate for Brother printer system deployment
- Five-bay hat channel design organizes multi-unit Brother printer stacks in a single enclosure.
- 34" W × 11" L × 7" H rigid plate eliminates custom fabrication for cabinet installations.
- Includes PA-CR-002 docking station attachment; no additional structural support required.
$152.00 $151.99 Save $0.01 -
Brother
SKU: LBX083001
Brother LBX083001 PJ7 Snap-In Holder Mount
Snap-in mount for Brother PJ7 portable printers, tool-free setup
- Tool-free snap-in attachment mounts PJ7/PJ8 printers in seconds, no hardware needed.
- Compact 10" × 2" × 1" footprint fits mobile carts, vehicle mounts, and tight workstations.
- Purely mechanical, no wiring required — safe for field redeployment without downtime.
$14.00 $13.99 Save $0.01 -
Brother
SKU: LBX085001
Brother LBX085001 5-Bay Printer Charging Cradle
5-bay charging cradle for Brother printer fleet management
- Charges and docks up to 5 Brother portable printers simultaneously from a single station.
- Compact 34"W × 15"D × 7"H footprint fits mobile workstations or fixed depot charging rails.
- Hat-channel mount requires no special tools, simplifying installation on compatible platforms.
$580.00 $491.99 Save $88.01 -
Brother
SKU: LBX088001
Brother LBX088001 PJ7 Hinge Plate
Replacement hinge plate for Brother PocketJet PJ7 portable printers
- Direct mechanical swap restores PJ7 mobility mounts without printer replacement.
- Compatible with all PocketJet PJ7 model variants; no firmware updates required.
- Compact at 12.00″W × 6.00″L × 4.50″H and 2.75 lbs for field serviceability.
$12.00 $11.99 Save $0.01 -
Brother
SKU: LC512PKS
Brother LC512PKS 2-Pack Black Ink Cartridges
2-pack black ink for Brother LC512 printers, 500 pages per cartridge
- Two-cartridge pack cuts procurement cycles when managing multi-printer deployments.
- Each cartridge yields ~500 pages, enabling accurate per-page cost and budget forecasting.
- Standard LC512 slot fit requires no adapters, minimizing technician swap time per unit.
$37.74 $32.99 Save $4.75 -
Brother
SKU: LC71M
Brother LC71M Standard-Yield Magenta Ink Cartridge
Standard-yield magenta ink for Brother inkjet printers
- Standard-yield at ~300 pages supports predictable magenta replenishment cycles.
- Drop-in install into the magenta slot requires no adapters or firmware changes.
- Designed for LC-series Brother inkjet printers; verify model compatibility before ordering.
$14.49 $13.99 Save $0.50 -
Brother
SKU: PTE110BP
Brother PTE110BP Handheld Industrial Thermal Transfer Label
Handheld thermal transfer label printer with Wi-Fi for field technicians
- 600 DPI thermal transfer print produces sharp, laminated labels up to 12 mm wide.
- Wi-Fi connectivity allows wireless label jobs from field devices without a USB tether.
- Compact handheld form factor with hard carry case suits direct tool-bag deployment.
$96.00 $95.99 Save $0.01 -
Brother
SKU: PTE510BP
Brother PTE510BP Handheld Industrial Thermal Transfer Label
Handheld thermal transfer printer for field labels up to 24mm wide
- 600 dpi thermal transfer print quality ensures sharp barcodes and QR codes for asset IDs.
- Dual auto-cutter with half-cut mode speeds peel-and-apply workflows in patch panel installs.
- USB-C interface and dedicated cable/panel label keys cut setup time on structured cabling jobs.
$316.00 $228.99 Save $87.01 -
Brother
SKU: RD003U6V2
Brother RD003U6V2 Weatherproof Receipt Inkjet Printer
Weatherproof inkjet receipt printer for outdoor field operations
- 600 dpi inkjet resolution ensures reliable 1D/2D barcode reads at field scan points.
- 802.11 Wi-Fi enables vehicle and outdoor deployment with no Ethernet cabling required.
- Weatherproof enclosure supports outdoor use where temperature swings and moisture are present.
$251.00 $211.99 Save $39.01 -
Brother
SKU: RD010U1M
Brother RD010U1M Direct Thermal Label Printer
Compact Wi-Fi label printer with 600 dpi direct thermal output
- 600 dpi direct thermal output ensures sharp, scannable barcodes on every label.
- Wi-Fi connectivity eliminates Ethernet dependency for flexible placement on any network.
- Integrates natively with RJ3050Ai, RJ4230BL, and RJ4250WBL mobile printer fleets.
$215.00 $185.99 Save $29.01 -
Brother
SKU: RDP01U1
Brother RDP01U1 Premium Die-Cut Label Roll
3" × 4" die-cut labels, 165 per roll, gapped with sensor marks
- 165 pre-cut 3"×4" labels per roll reduce changeover frequency in high-volume runs.
- Integrated sensor marks ensure accurate feed detection and consistent label registration.
- 12-roll case format supports extended production runs without repeated media restocking.
$154.00 $153.99 Save $0.01 -
Brother
SKU: TN5000PF
Brother TN5000PF Black Toner Cartridge
Standard black toner for Brother laser printers, 2,200-page yield
- Yields approximately 2,200 pages per cartridge, reducing swap frequency in busy workgroups.
- Drop-in installation with no adapters or firmware updates needed for compatible Brother models.
- Store in cool, dry conditions to maintain print consistency across the cartridge's full lifespan.
$64.49 $54.99 Save $9.50 -
Brother
SKU: TN530
Brother TN530 Standard Yield Black Toner Cartridge
Genuine Brother TN530 black toner for 3,300-page standard yield
- Genuine OEM black toner rated for approximately 3,300 pages at 5% coverage.
- Drop-in installation with no configuration required; insert, click, and print.
- Compatible with Brother HL, MFC, and DCP laser series; verify model before ordering.
$124.49 $123.99 Save $0.50 -
Brother
SKU: TX5311
Brother TX5311 12mm Label Tape Cartridge
12mm laminated label tape with 15m length for Brother P-touch
- Laminated finish resists moisture, chemicals, and abrasion for industrial labeling.
- 15m (50 ft) roll reduces cartridge swaps during high-volume rack and asset labeling.
- 12mm black-on-blue tape prints at 600 dpi for sharp, legible identification labels.
$43.99 -
Citizen
SKU: DT3X3-5-1
Citizen DT3X3-5-1 Lbl CMP30 Dt 3x3.5"c 10RL/Ctn 10 Pack
$13.03 $11.99 Save $1.04 -
Citizen
SKU: TT400200
Citizen TT400200 Ttlbls 4x2 3000/Rl 4RLS/Case 12000 Label
$183.28 $164.99 Save $18.29
Labels and Media
Direct thermal, thermal transfer, synthetic, and RFID label stock for barcode printing. Available in rolls and fanfold formats, pre-sized for shipping, asset tracking, product marking, and compliance labeling workflows.
Plan Your Deployment
- Match label dimensions and material to printer model and application
- Select direct thermal for short-life labels or thermal transfer for durability
- Evaluate synthetic labels (polyester, polypropylene) for chemical or outdoor exposure
- Specify core size (1 inch or 3 inch) matching your printer spindle
Labels and Media — Engineering-Grade Warehouse Data Capture for Commercial Deployments
This category covers 125 working models of labels and media sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Read range and barcode symbology drive scanner choice. Linear (1D) scanners read UPC, Code 128, EAN. 2D imagers read QR, DataMatrix, Aztec — increasingly required for compliance labels, mobile payment, and DSCSA pharma serialization. Long-range scanners reach 20-30 feet for high-rack inventory; short-range handhelds work at arm's length on conveyors.
Form factor and connectivity affect operator throughput. Handheld scanners, ring scanners, mobile computers, and presentation scanners each suit different workflows. Wireless (Bluetooth, Wi-Fi) scanners free operators from cable but require battery management. Mobile computers (Zebra TC, Honeywell CT) bundle scanning into a phone-style device with apps for inventory, picking, and put-away.
Label printer choice depends on volume, media type, and durability requirements. Thermal-transfer printing uses a ribbon and produces durable labels for outdoor or chemical exposure. Direct-thermal needs no ribbon but labels fade in sun and heat; correct for shipping labels and short-term applications. Print volume per shift dictates desktop versus industrial printer (Zebra ZT, Honeywell PD/PX, TSC TTP).
Media compatibility and ribbon-printer matching is the slow-burn problem of label-printing deployments. Cheap mismatched ribbon/media combinations cause printhead wear, smudging, and label adhesion failure. Use the manufacturer's recommended ribbon/media pairings — the slight cost premium pays back in printhead life. Plan ribbon and media inventory together; running out of either stops the operation.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 203 DPI |
| Connectivity | Wi-Fi, Wired, Bluetooth, USB-C |
| Type | Printer, RFID UHF Printable Tag, Cable, Cartridge Ribbon, Scanner, Media Width Guide, Spare Part, Mobile Computer |
Top Brands in This Category
Frequently Asked Questions
Should I buy a handheld scanner or a mobile computer?
Handheld scanners (Zebra DS, Honeywell Granit, Code CR) are best for high-volume single-purpose scanning — receiving, shipping, point-of-sale. Mobile computers (Zebra TC, Honeywell CT, Datalogic Skorpio) bundle scanning into a device that runs picking, inventory, and warehouse-management apps. For operations where the operator needs more than scan-and-confirm, mobile computers are worth the additional cost. Pure scan-and-confirm workflows are cheaper with handhelds.
What's the difference between direct-thermal and thermal-transfer printing?
Direct-thermal printing applies heat to chemically-treated labels — no ribbon needed. Labels fade in sun and heat, so it's correct for short-term applications like shipping. Thermal-transfer printing melts ribbon ink onto durable label stock — used for permanent asset tags, outdoor labels, and chemical-exposure labels. Choose direct-thermal for cost on short-term labels and thermal-transfer for durability on long-life labels.
How long does a label printer printhead last?
Industrial printheads last 30-50 million inches of printing on a well-maintained printer with matched ribbon and media. Desktop printers run 20-30 million inches. Mismatched ribbon/media, abrasive labels, and inadequate cleaning shorten life dramatically — to under 5 million inches in worst cases. Schedule printhead inspection at every label-roll change and cleaning at every shift.
Can I use generic ribbons in any printer?
Technically yes for ribbons in compatible width — practically no without quality risk. Manufacturer-recommended ribbons match the printhead's resistance, dot timing, and ink chemistry. Generic ribbons often cause faded prints, increased printhead wear, or static buildup that damages electronics. The cost savings on ribbon rarely justify the operational risk; stick with the manufacturer's recommended consumables for production printers.
What barcode symbology should I print?
Code 128 is the universal default for 1D barcodes — high density, alphanumeric. UPC-A and EAN-13 are required for retail goods. QR and DataMatrix are required for compliance, mobile payment, and many compliance labels (pharma DSCSA). Code 39 is older and lower-density — used in legacy systems. For new applications, lead with Code 128 (1D) and DataMatrix (2D) and add others only when required.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.



