Charging Docks & Cradles for Mobile Computers & Scanners

Plan Your Deployment

Match cradle model to specific mobile computer or scanner model
Select single-slot for individual desks or multi-slot for shared fleet charging
Evaluate Ethernet communication cradles for data sync during charging
Plan dock placement for shift-change efficiency

Showing Results for Charging Docks and Cradles

Compare

Out of stock
Zebra

SKU: CUP-RFD49-TC5X-2R

Zebra CUP-RFD49-TC5X-2R Replacement Cradle Cup

Replacement cradle cup for Zebra RFD40 and RFD90 mobile computers
- OEM cradle interface for secure docking and charging alignment
- Compatible with RFD40 and RFD90 series across warehouse and retail
- Direct replacement mounting interface for existing Zebra dock systems
Special Order · Ships in 2-3 weeks

$80.99 $77.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: CUP-TC5X-SEC01-02

Zebra CUP-TC5X-SEC01-02 Charge-Only Cradle

Charge-only cradle for Zebra TC5X SE mobile computers
- Proprietary Zebra connector charges TC5X SE devices without data sync
- Wired connection ideal for fleet staging, warehouses, and vehicle docks
- Stationary charging station for rotating device cycles throughout shifts
Special Order · Ships in 2-3 weeks

$54.99 $51.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: CUP-TC7X-SEC01-02

Zebra CUP-TC7X-SEC01-02 Charging Base Cradle

Charging cradle for Zebra TC7X SE mobile computers
- Docking base with integrated battery charging via cradle contacts
- Includes charging cable with cigarette lighter adapter for power
- Fixed mounting for warehouse, logistics, and field service stations
Special Order · Ships in 2-3 weeks

$54.99 $51.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: FEC-870125

Zebra FEC-870125 DS3678-HP Keypad & Display Cradle

Docking cradle with keypad for DS3678-HP stationary scanning
- Integrated keypad and display for extended data entry at fixed stations
- IP65 rated cradle handles dust and moisture in warehouse environments
- Wi-Fi connectivity syncs scanned data in real time during dock operations
Special Order · Ships in 2-3 weeks

$1,115.99 $1,067.99 Save $48.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Zebra

SKU: FEC-890856

Zebra FEC-890856 IP65 Sealed Cradle

IP65 sealed cradle for dust and washdown environments
- IP65 rating protects against dust ingress and water jets
- Wired connectivity for stable power and data without dropouts
- Fixed-mount cradle designed for warehouse and field logistics use
In stock · Ships same business day

$326.99 $312.99 Save $14.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Zebra

SKU: KT-CRD-MC33-2SUCHG-01

Zebra KT-CRD-MC33-2SUCHG-01 1-Slot USB Charging Cradle

Single-slot USB cradle for Zebra MC33 mobile computers
- USB connectivity integrates with existing powered ports, no proprietary power supply needed
- Compact single-slot design fits point-of-sale stations and vehicle-mounted workstations
- Secured seating prevents device tipping during high-activity shift changes and handoffs
In stock · Ships same business day

$350.99 $335.99 Save $15.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: KT-CRDTC7X2E-01

Zebra KT-CRDTC7X2E-01 2-Slot Ethernet Cradle Kit

Dual-slot ethernet cradle for Zebra TC7X scanners with simultaneous charging
- Charges two 2400mAh battery units at the same time via single power supply
- Wired ethernet connectivity integrates directly into existing network infrastructure
- Includes cradle base, ethernet cable, and power supply—ready to deploy
Special Order · Ships in 2-3 weeks

$550.99 $526.99 Save $24.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: KT-CRDTC7XVEH-01

Zebra KT-CRDTC7XVEH-01 Vehicle Cradle Kit

Vehicle cradle for Zebra TC7X handheld terminals with vibration resistance
- Secure mounting designed for TC7X series devices in field delivery and logistics
- Vibration-resistant construction protects equipment during transport and vehicle movement
- Hands-free positioning keeps device accessible for scanning during mobile operations
Special Order · Ships in 2-3 weeks

$409.99 $391.99 Save $18.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: SAC-MC33-20SCHG-01

Zebra SAC-MC33-20SCHG-01 MC32/MC33 20-Slot Battery Charger

20-slot charging station for MC32/MC33 fleet battery rotation
- 20-bay configuration keeps warehouse and logistics fleets charged across shifts
- Compatible with Zebra MC32 and MC33 mobile computer batteries
- Reduces downtime in distribution centers, manufacturing, and field service ops
Special Order · Ships in 2-3 weeks

$2,224.99 $2,128.99 Save $96.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Zebra

SKU: SAC-MC33-4SCHG-01

Zebra SAC-MC33-4SCHG-01 4-Slot Battery Charger

4-slot battery charger for Zebra MC32/MC33 warehouse devices
- Charge 4 batteries simultaneously to keep mobile device fleets operational
- Compatible with both MC32 and MC33 5000mAh battery packs
- Compact docking station scales across multiple sites for fleet management
In stock · Ships same business day

$465.99 $444.99 Save $21.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Zebra

SKU: SAC-MC93-16SCHG-01

Zebra SAC-MC93-16SCHG-01 MC93 16-Slot Battery Charger

16-slot charger for Zebra MC93 mobile computers and scanners
- Charges 16 MC93 battery packs simultaneously for multi-shift warehouse ops
- Designed for MC93 series compatibility—confirm battery model in device docs
- Rotates batteries during shift changes to keep field teams supplied and mobile
In stock · Ships same business day

$1,402.99 $1,341.99 Save $61.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: SAC-MPM-1BCHGUS1-01

Zebra SAC-MPM-1BCHGUS1-01 ZQ320 Battery Charger

1-slot charger for Zebra ZQ320 mobile computers
- Single-slot design charges ZQ320 batteries sequentially for shift operations
- Supports warehouse, logistics, and field service deployment environments
- Integrates with existing ZQ320 infrastructure and device management setups
Special Order · Ships in 2-3 weeks

$109.99

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: SAC-MPP-1BCHGEU1-01

Zebra SAC-MPP-1BCHGEU1-01 Single-Slot Battery Charger

Single-slot rapid charger for Zebra ZQ600, ZQ500, and QLN devices
- Charges 3200mAh batteries with rapid charging for quick turnaround
- Wired connection delivers stable power without wireless dependency
- Single-slot design suits small teams, backup stations, and staged workflows
Special Order · Ships in 2-3 weeks

$151.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Zebra

SKU: SAC-MPP-1BCHGUS1-01

Zebra SAC-MPP-1BCHGUS1-01 1-Slot Battery Charger

Single-slot charger for Zebra ZQ5/ZQ6 with US power adapter
- Charges one ZQ5 or ZQ6 device at a time in compact desktop cradle
- Includes US 110-240V power adapter; no separate supply needed
- Portable footprint fits tight warehouse workbenches and shift staging areas
In stock · Ships same business day

$356.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Zebra

SKU: SAC-MPP-6BCHUS1-01

Zebra SAC-MPP-6BCHUS1-01 3-Slot Battery Charger

3-slot battery charger for Zebra devices with simultaneous charging
- Charge 3 batteries in parallel to eliminate rotation delays in shift ops
- Works with standard Zebra battery form factor across mobile computers
- AC 110–240V with US power cables included, ready to deploy
In stock · Ships same business day

$662.99 $633.99 Save $29.00

Add to Cart
The item has been added
Compare

Out of stock
Zebra

SKU: SAC-NGTC5TC7-4SCHG-01

Zebra SAC-NGTC5TC7-4SCHG-01 4-Slot Battery Charger

4-slot simultaneous charger for TC53, TC58, TC73, TC78 devices
- Charges 4 batteries at once, reducing downtime between shifts
- Works with Zebra TC-series mobile computers in warehouse/retail ops
- Includes charging station and power supply, ready to deploy
Special Order · Ships in 2-3 weeks

$609.99 $582.99 Save $27.00

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Dock Capacity vs. Fleet Size & Shift Turnover

Undersized dock infrastructure forces devices offline during peak shifts, reducing inventory throughput and creating data sync backlogs. Calculate simultaneous users × device lifecycle (scan-to-dock interval) to determine minimum multi-slot capacity. Most warehouse operations require 60–80% fleet docking capacity online at any time.

Power Supply Headroom & Sequential Charging

Multi-slot docks drawing peak current from all cradles simultaneously can exceed standard facility circuits (15–20A), triggering breaker trips or damaging dock electronics. Premium docking systems use sequential charge algorithms or redundant PSUs to stagger load and maintain floor stability. Verify PSU wattage against cradle count and device battery capacity (Wh).

Data Sync & Network Connectivity

Wireless-only charging workflows introduce latency and data loss if devices lose connectivity during offshift hours. Communication docks with USB or Ethernet ports guarantee real-time transaction upload, configuration pushes, and firmware updates independent of WiFi. Critical for high-velocity picking, packing, and returns operations where data freshness drives accuracy.

Device-to-Dock Compatibility & Future-Proofing

Cradles are device-specific; charging a mobile computer from a barcode scanner dock requires adapter plates or replacement cradles. Choose docking systems from established OEMs like Zebra, Datalogic, or Unitech that offer multi-device compatibility packs and long lifecycle support to avoid costly proprietary lock-in.

Environmental Durability & Seal Ratings

Warehouse docks face dust, moisture, and thermal cycling from loading docks and freezer units. IP54+ sealed cradles with stainless contacts and conformal coatings prevent corrosion and contact degradation—critical in cold-chain and outdoor dock environments where dock replacement is expensive and disruptive.

Total Cost of Ownership: Dock vs. Device Cycle

A multi-slot dock supporting 8–10 devices typically costs 3–5× a single cradle but eliminates manual charger sprawl, reduces device damage from dropped cables, and centralizes fleet telemetry. Calculate 5-year ROI including labor savings, device replacement rates, and dock maintenance before choosing single-cradle architectures for growing fleets.

Technology Stack

The specs and acronyms that actually affect charging docks and cradles performance.

Simultaneous Charging Capacity (Slot Count)

The number of devices a dock can charge at full rate without power throttling. Single-slot docks handle one device; multi-slot docks range from 4–16+ cradles. Higher slot counts reduce shift-end charging bottlenecks but demand larger power supplies and facility circuits. Verify peak simultaneous use does not exceed dock capacity.

Power Supply Rating (Watts / Amps)

The total electrical budget available to the dock. Calculate: (device battery capacity in Wh × number of simultaneous slots × 1.2 safety factor) ÷ charge time in hours. Example: 10 devices × 25Wh ÷ 2 hours × 1.2 = ~150W minimum. Undersized PSUs cause slow charging or thermal shutdown during peak demand.

Communication Port (USB, Serial, Ethernet)

Docks with data ports enable offline inventory sync, config pushes, and firmware updates without WiFi. Serial/USB ports suit single or small multi-slot docks; Ethernet is required for large fleet management systems. Confirm protocol support (USB-A, Type-C, RS-232, 10/100Base-T) matches your MES/WMS backend.

Contact Material & Plating (Gold, Silver, Nickel)

Cradle electrical contacts degrade from oxidation in humid or freeze-thaw environments. Gold plating resists corrosion longest but costs more; silver or nickel are acceptable for climate-controlled warehouses. Stainless spring contacts prevent mechanical wear; verify contact force spec (gram-force) to avoid loose connections from repeated insertions.

Thermal Management & Charge Algorithms

Multi-slot docks generate heat from simultaneous charging; fans or passive heatsinks prevent PSU throttling. Smart charge controllers reduce current to flagged batteries or idle slots, extending lithium-ion lifespan by 20–30% versus continuous fast-charge. Look for temperature sensors and preheat cycles for cold-chain operations.

Mechanical Retention & Strain Relief

Cradles must secure devices against vibration (forklifts, conveyor shock) and support suspended device weight without stress on the charging port. Over-retention causes port damage; under-retention allows drop damage. Verify retention force (N), cable strain-relief design, and drop-test certification for vehicle-mount or high-traffic scenarios.

Typical Deployment Scenarios

Mid-Size Distribution Center (50–100 Mobile Computers, 2–3 Shifts)

Deploy two 8-slot mobile computer charging docks with Ethernet communication ports in the supervisor station, plus four single-slot vehicle-mount cradles on RF-equipped pallet jacks. Total dock capacity = 20 slots (covers 60% of fleet simultaneous charge). Add spare battery packs and a redundant PSU for dock 1 to prevent single-point charging failure during peak shift.

High-Velocity E-Commerce Fulfillment (200+ Barcode Scanners, 4 Shifts)

Four 12-slot multi-slot docks (48 total capacity) positioned at sort, pick, pack, and returns zones with USB communication for real-time scan upload to WMS. Stagger shift changeovers across docks to distribute 200-device charging load. Include sequential charge firmware to cap inrush current under 20A per facility breaker; verify PSU minimum 400W per dock with redundant backup. Integrate data sync cables into dock infrastructure for offline-tolerant environments.

Cold-Chain / Freezer Operations (30–40 Mobile Computers, -18°C Environment)

Deploy one heated 4-slot dock in the warm vestibule (preheat cradles 2–3 minutes before device insertion) and mount single-slot vehicle cradles on hand-trucks for in-freezer opportunistic charging during pick cycles. Dock PSU must be IP54-sealed with conformal coating to survive condensation. Choose Zebra or Unitech docks with proven cold-soak ratings and stainless contact platings.

Small Retail / QSR Back-of-House (8–12 Mobile Computers, Single Shift)

One 6-slot dock with USB communication installed in the manager station. Supports daytime charging during downtime and overnight full recharge. No redundant PSU required, but confirm dock IP rating for high-humidity kitchen environments. Pair with protective cases and dock mounting brackets to prevent accidental bumps and water splash.

Frequently Asked Questions

What size charging dock do I need for my fleet?

Calculate simultaneous users during peak shift, then size the dock to 60–80% of fleet capacity. Example: 100 devices with 3 simultaneous shifts = ~40–60 devices online at any time; purchase a 10-slot multi-dock (covers 25% concurrent charge) or two 8-slot docks (covers 40%). Factor in device battery capacity (Wh), desired charge-time window (2–4 hours), and PSU headroom—undersized docks cause bottlenecks and extended offline periods. Consult the device specs and dock compatibility sheets from Zebra or Datalogic for precise power requirements.

Can I mix different device types in a single multi-slot dock?

Most multi-slot docks include interchangeable cradle cartridges or adapter plates that support multiple device SKUs (e.g., same dock housing holds cradles for barcode scanners, mobile computers, and label printers). Verify cradle compatibility at purchase or upgrade; proprietary cartridges can be expensive. Check whether the dock PSU and data port can simultaneously handle mixed-power devices (some scanners draw 5W, mobile computers 20W+) without thermal throttling or port conflicts. Contact the manufacturer for compatibility matrices.

What power supply rating do I need for my dock?

Multiply (device battery capacity in Wh × number of simultaneous slots ÷ desired charge time in hours) × 1.2 safety factor. Example: 10 devices × 25Wh ÷ 2 hours × 1.2 = 150W minimum. Multi-slot docks charge faster (higher W rating needed); communication docks add 10–30W for active data transfer. Always exceed calculated minimum by 20% to avoid thermal shutdown or slow charging. Verify facility circuit capacity (typical warehouse breakers = 15–20A @ 120V = 1,800–2,400W); multiple docks may require dedicated circuits.

How do I ensure data sync if WiFi fails in my warehouse?

Choose communication docks with Ethernet or USB ports hardwired to your MES/WMS server. Devices automatically sync when docked, capturing all offline transactions (picks, scans, returns) without WiFi dependency. USB docks suit smaller operations (1–4 slots); Ethernet docks scale to large multi-location fleets with centralized database connectivity. Verify port protocol (USB Type-A/C, RJ45) matches your backend infrastructure. This is especially critical for high-accuracy environments where data freshness drives order accuracy—delays of even a few minutes can cascade through fulfillment.

What maintenance does a charging dock require?

Clean cradle contacts quarterly with isopropyl alcohol and a soft cloth to remove oxidation and improve connection quality. Inspect spring contacts for mechanical wear or corrosion, especially in humid/cold environments; replace cartridges if contact resistance exceeds 50mΩ. Monitor PSU fan operation (if equipped) and ensure dock airflow is unobstructed. Replace spare contact cartridges as needed. Most docks have a 5–7 year lifespan; plan replacement cycles around device refresh schedules to avoid stranded infrastructure.

Are vehicle-mount charging cradles durable for forklifts and high-vibration environments?

Yes, vehicle-mount cradles are designed for shock, vibration, and repeated mechanical impact. They feature reinforced retention springs, sealed electrical contacts, and shock-absorbing mounts that exceed MIL-STD-810 drop/vibration testing. Verify IP rating (IP54+ recommended) and retention force (typically 5–10N) to ensure devices stay secure during turns and bumps. Cold-chain and outdoor dock environments benefit most from sealed, stainless-contact vehicle cradles. Confirm cradle compatibility with your forklift mounting system (Zebra, Unitech, and other OEMs offer standardized plate interfaces).

Charging Docks and Cradles

Plan Your Deployment

Showing Results for Charging Docks and Cradles

Zebra CUP-RFD49-TC5X-2R Replacement Cradle Cup

Zebra CUP-TC5X-SEC01-02 Charge-Only Cradle

Zebra CUP-TC7X-SEC01-02 Charging Base Cradle

Zebra FEC-870125 DS3678-HP Keypad & Display Cradle

Zebra FEC-890856 IP65 Sealed Cradle

Zebra KT-CRD-MC33-2SUCHG-01 1-Slot USB Charging Cradle

Zebra KT-CRDTC7X2E-01 2-Slot Ethernet Cradle Kit

Zebra KT-CRDTC7XVEH-01 Vehicle Cradle Kit

Zebra SAC-MC33-20SCHG-01 MC32/MC33 20-Slot Battery Charger

Zebra SAC-MC33-4SCHG-01 4-Slot Battery Charger

Zebra SAC-MC93-16SCHG-01 MC93 16-Slot Battery Charger

Zebra SAC-MPM-1BCHGUS1-01 ZQ320 Battery Charger

Zebra SAC-MPP-1BCHGEU1-01 Single-Slot Battery Charger

Zebra SAC-MPP-1BCHGUS1-01 1-Slot Battery Charger

Zebra SAC-MPP-6BCHUS1-01 3-Slot Battery Charger

Zebra SAC-NGTC5TC7-4SCHG-01 4-Slot Battery Charger

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Charging Docks and Cradles

Frequently Asked Questions

Related Categories

Engineering Reading