Refine by

No filters applied

Cables and Adapters

Cables and adapters connect barcode scanners, mobile computers, RFID readers, and industrial label printers to the systems that power warehouse operations. From USB and serial interface cables to communication adapters and connectivity accessories, these components ensure reliable device communication across warehouse, logistics, and distribution environments.

Connectivity Considerations

USB, serial, and Ethernet interface compatibility
Device-to-host communication requirements
Cable durability for industrial environments
Adapter compatibility with scanners and printers
Length and routing considerations for workstations

Scanner Cables Mobile Computer Cables Printer Connectivity

Showing Results for Cables and Adapters

Compare

Out of stock

Datalogic

Datalogic CAB-MLP-05 Multi Lighting Power Cable 5M

$36.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CAB413E2 USB+PWR STRAIGHT POT 5M SH5308 – 90A052198

$46.00 $31.99 Save $14.01

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic Cable for dock-PC RS232 communication – 94A051020

$33.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic Cable for PC RS232 communication – 94A051022

$42.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic Cable from device Handylink to female DB9 – 94A051972

$73.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic Cable from Micro USB device or dock to – 94A051969

$24.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic Cable, KBW, PS/2, Coiled, CAB-437, 9 ft – CAB-437

$50.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CBL RS-232 9D Beetle Cable 4.5M

$31.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CBL RS232 9D Serial Cable 600mm

$27.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CBL-1487 M12/5P Female Connector Cable

$26.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CBL-1494-02 M12/5P Female Cable 2M

$37.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added

Datalogic

Datalogic CM9630 Multi-Interface Connection Module

$62.00 $39.99 Save $22.01

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CM9631 Multi-Interface Connection Module Cable

$80.99

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CM9680 Connection Module Ethernet Profinet

$417.00 $266.99 Save $150.01

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CM9680-N200 Ethernet Connector Module

$417.00 $266.99 Save $150.01

Add to Cart
The item has been added
Compare

Out of stock

Datalogic

Datalogic CM9681-N100 Ethernet Connection Module

$649.00 $415.99 Save $233.01

Add to Cart
The item has been added

Browse by Product Family

Click through to shop the families that fit your cables and adapters deployment.

USB and Serial Cables

Direct-connect USB-A, USB-C, micro-USB, and legacy RS-232 serial cables for barcode scanners and mobile computers. Essential for device communication and power delivery in warehouse environments.

Interface and Communication Adapters

RS-485, RS-422, USB-to-serial, and multi-protocol adapters that bridge older industrial equipment to modern networks. Critical for legacy device integration without hardware replacement.

Charging and Dock Connectors

Proprietary charging cables, dock connectors, and power adapters for mobile computers and handheld scanners. Designed for high-cycle durability in continuous-use environments.

RFID and Specialty Reader Cables

Shielded cables and connectors for RFID readers, antenna extensions, and industrial label printers. Built for EMI resistance and reliable long-distance signal transmission.

Network and PoE Accessories

Ethernet patch cables, PoE injectors, and network connectors for powering networked scanners, cameras, and access points. Supports both Cat5e and Cat6a specifications.

Battery and Power Connectors

Power connectors, battery terminals, and DC barrel plugs for mobile devices and field equipment. Ensures consistent power delivery in rugged warehouse conditions.

What to Look For When Buying

The decisions that matter most before you spec.

Compatibility with Your Scanner or Mobile Computer Model

Not all cables are interchangeable—proprietary connectors vary by manufacturer and firmware generation. Before ordering, verify the exact model number of your barcode scanner or mobile computer and cross-reference connector type. Major brands like Datalogic, CipherLab, and Unitech have specific pinouts; mixing vendors can cause device lockout or data loss.

Cable Shielding and EMI Resistance in Dense RF Environments

Warehouse floors with multiple RFID readers, Wi-Fi access points, and IP cameras generate electromagnetic interference that degrades signal quality. Shielded USB and serial cables with ferrite cores protect against crosstalk; unshielded alternatives risk intermittent read failures and dropped connections that compound during peak inventory cycles.

Connector Durability Under High-Cycle Use

Docking connectors on mobile computers see 50–100 insertion cycles per day in active warehouses. Cheap third-party adapters wear out within 6–12 months; genuine Star Micronics and Socket Mobile connectors are rated for 10,000+ cycles. Budget for OEM-grade cables to avoid premature hardware replacement and downtime.

Network Backbone Capacity for Wireless Device Traffic

When deploying dozens of mobile scanners or label printers, network cables and patch panels become bottlenecks. Ensure your network infrastructure uses Cat6a Ethernet and proper PoE budget planning (detailed in our guide on PoE power allocation) to avoid device resets and latency.

Legacy Serial and RS-485 Equipment Still in Service

Many warehouses retain older label printers and handheld terminals with RS-232 or RS-485 ports. Serial-to-USB or multi-protocol adapters allow gradual technology refresh without full hardware overhaul, but verify driver support on Windows and Linux before deployment.

Power Delivery Requirements for Fast Charging and Simultaneous Use

Epson label printers and Unitech mobile computers often require higher amperage (2–3A) than standard USB chargers provide. Under-spec cables cause slow charging, device shutdowns during active scanning, and battery degradation. Select adapters rated for your device's full current draw to maintain uptime in high-throughput operations.

Technology Stack

The specs and acronyms that actually affect cables and adapters performance.

USB Revision (USB 2.0 / 3.0 / 3.1 / USB-C)

USB 2.0 (480 Mbps) suffices for barcode scanner data but limits charging speed; USB 3.0+ enables faster label printer spool-out and multi-device docking. USB-C supports power delivery (USB-PD) up to 100W, eliminating need for separate power adapters on newer mobile computers and docking stations.

RS-232 / RS-485 Protocol (Serial Communication)

Legacy industrial standard for long-distance (<1200 ft) low-speed communication with minimal EMI. RS-485 supports multi-drop (up to 32 devices) on one twisted-pair; essential for connecting older label printers and RFID readers. Requires baud rate and parity matching (usually 9600, 8N1).

PoE (Power over Ethernet)

Delivers 15W–95W over single Cat5e/6 cable, eliminating separate DC adapters for networked scanners and IP cameras. PoE+ (802.3at, 30W) and PoE++ (802.3bt, 90W+) support power-hungry devices; verify your network switch budget against total device wattage to prevent brownout.

Connector Pinout and Proprietary Locking

Barcode scanners use vendor-specific connectors (not universal USB); Datalogic, CipherLab, and Socket Mobile each define unique pin assignments. Mating incorrect cables can short-circuit power rails or corrupt firmware. Always verify part numbers before purchase.

Shielding (Foil, Braided, Ferrite Cores)

Shielded twisted-pair cables reject RF noise from RFID antennas and Wi-Fi; ferrite cores on connectors further suppress high-frequency interference. Critical in dense warehouse environments where unshielded cables suffer >10% CRC errors.

Cable Gauge (AWG) and Amperage Rating

Thicker gauge (lower AWG number) supports longer runs and higher current without voltage drop. Label printers and fast-charging mobile docks require 16–18 AWG minimum; battery cables for high-drain devices need 10–12 AWG. Check both cable and connector specs; a thin adapter negates a heavy cable.

Typical Deployment Scenarios

Mid-Size Warehouse (40 Mobile Scanners, 8 Label Printers)

Deploy a central charging dock with 40 USB-A/proprietary combo cables and 8 parallel RS-232 or USB cables to Epson printers. Network backbone requires PoE+ or dedicated 24V power supplies; use shielded Cat6a Ethernet to minimize infrastructure latency and support IP camera traffic simultaneously.

Legacy Retrofit (10 RS-485 Label Printers, Modern PLC)

Install USB-to-RS-485 adapters on the PLC controller; daisy-chain printers using multi-drop RS-485 cable (twisted-pair, shielded, 120Ω termination). Verify baud rate and parity on each device; test communication before full deployment to avoid production halt.

High-Density RFID Inventory (20 RFID Readers, Antenna Arrays)

Use shielded, ferrite-core cables to each RFID reader and antenna; run separate power feeds (not daisy-chained) to prevent voltage sag. Network readers via Ethernet PoE; monitor core switch performance to ensure no packet loss during rapid tag reads.

Multi-Site Rollout (5 Locations, Mixed Equipment)

Create standardized cable kits per location (USB, serial, PoE injectors) with labeled, color-coded connectors. Stock OEM cables from Unitech, Star Micronics, and Socket Mobile; third-party bulk buy on commodity adapters only. Document pinouts for each brand; archive in quote templates for rapid reorder and troubleshooting.

Top Brands for Cables and Adapters

Click through to each brand for engineering profile and NDAA compliance status.

Datalogic

Authorized dealer · browse the full Datalogic catalog for this category

CipherLab

Authorized dealer · browse the full CipherLab catalog for this category

Unitech

Authorized dealer · browse the full Unitech catalog for this category

Epson

Authorized dealer · browse the full Epson catalog for this category

Star Micronics

Authorized dealer · browse the full Star Micronics catalog for this category

Socket Mobile

Authorized dealer · browse the full Socket Mobile catalog for this category

Frequently Asked Questions

Can I use a generic USB cable with my barcode scanner?

No. While USB connectors look similar, barcode scanners often use proprietary barrel or multi-pin connectors specific to each brand (Datalogic, CipherLab, Unitech). Generic cables may fit loosely, corrupt firmware, or short-circuit power. Always source OEM cables matched to your exact scanner model number.

What's the difference between RS-232 and RS-485 adapters?

RS-232 is point-to-point (one device per port), slower, and requires individual cables to each printer or reader. RS-485 is multi-drop (up to 32 devices on one twisted-pair), supports longer distances, and reduces cable clutter. Choose RS-485 adapters if you have multiple label printers or RFID readers sharing a backbone.

How much power do I need for a PoE+ docking station with 10 mobile computers?

Each mobile computer draws 5–15W depending on model; a 10-unit dock requires ~150W total. Ensure your network switch supports PoE+ (30W per port minimum) and has sufficient aggregate power budget. Overloaded switches cause device lockup and data loss.

Do I need shielded cables in my warehouse?

Yes, if you operate RFID readers, Wi-Fi, or have nearby IP cameras and network infrastructure. Shielded cables with ferrite cores reduce electromagnetic interference and prevent read errors on scanners and printers. The cost difference (~$5–15 per cable) is small compared to troubleshooting downtime.

What's the lifespan of a typical barcode scanner charging cable?

OEM cables (e.g., Star Micronics, Socket Mobile) are rated for 10,000+ dock cycles and last 3–5 years in active warehouses. Third-party or off-brand cables fail within 6–12 months due to poor connector contact and insulation breakdown. Budget for annual OEM cable replacement as a maintenance line item.

Can I mix cables from different barcode scanner brands?

No. Each brand uses unique pinout definitions; mixing Datalogic and CipherLab cables, for example, will short power rails, corrupt firmware, or lock the device. Maintain separate cable inventories by brand and model. When upgrading hardware, dispose of old cables rather than risk accidental cross-use.

Related Categories

Adjacent equipment that typically ships alongside these products.

Accessories Label Printers RFID Accessories Barcode Scanners Mobile Computers Charging Docks and Cradles Cases and Holsters Spare Parts

Engineering Reading

Deep-dives from our engineering team on deployment planning.

Why Surveillance Systems Fail During Incidents Why Your NVR Can't Handle Its Rated Camera Count Why Surveillance Networks Collapse at the Core Why Large Surveillance Systems Fail: Storage Throughput Reality Why Surveillance Standards Collapse After the Third Location Why 4K Cameras Fail at Night Why Your PoE Switch Fails After 18 Cameras Frame Rate vs. Reality: When 30 FPS Makes Your System Worse

Cables and Adapters

Connectivity Considerations

Showing Results for Cables and Adapters

Datalogic CAB-MLP-05 Multi Lighting Power Cable 5M

Datalogic CAB413E2 USB+PWR STRAIGHT POT 5M SH5308 – 90A052198

Datalogic Cable for dock-PC RS232 communication – 94A051020

Datalogic Cable for PC RS232 communication – 94A051022

Datalogic Cable from device Handylink to female DB9 – 94A051972

Datalogic Cable from Micro USB device or dock to – 94A051969

Datalogic Cable, KBW, PS/2, Coiled, CAB-437, 9 ft – CAB-437

Datalogic CBL RS-232 9D Beetle Cable 4.5M

Datalogic CBL RS232 9D Serial Cable 600mm

Datalogic CBL-1487 M12/5P Female Connector Cable

Datalogic CBL-1494-02 M12/5P Female Cable 2M

Datalogic CM9630 Multi-Interface Connection Module

Datalogic CM9631 Multi-Interface Connection Module Cable

Datalogic CM9680 Connection Module Ethernet Profinet

Datalogic CM9680-N200 Ethernet Connector Module

Datalogic CM9681-N100 Ethernet Connection Module

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Cables and Adapters

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service