Lifesafety Power · B100F8PE4M-WP-AWS01

Lifesafety Power B100F8PE4M-WP-AWS01 12V secondary voltage power

12V secondary voltage expansion module designed to distribute power to multiple egress control and access devices

• Adjustable 5–18V output at up to 4A per circuit supports diverse egress device loads.
• 8 PTC-supervised outputs provide automatic overcurrent protection across all connected loads.
• E4 enclosure (24×20×6.5 in) arrives prewired with Panduit–Phoenix terminals for fast install.

Lifesafety Power · BX50-E1

Lifesafety Power BX50-E1 PoE Power Extractor Splitters 50W or 75W

• Splits one PoE source into two outputs, supporting a combined 50W load.
• Compatible with 802.3af and 802.3at PoE injectors or switch ports.
• UL294/FAI listed, confirming compliance for commercial life-safety deployments.

Lifesafety Power · CNV-16DRF-MERC-STRD

Lifesafety Power CNV-16DRF-MERC-STRD 16 Door Standard Mercury

16-door access control power supply designed for enterprise installations requiring distributed power across multiple access points

• Powers up to 16 doors from a single 24VDC, 150W distributed supply.
• Scales across warehouses and multi-tenant buildings where centralized power is impractical.
• Integrates within the Lifesafety Power 16-door modular access control ecosystem.

Lifesafety Power · CNV-4DRP-MERC-STRD

Lifesafety Power CNV-4DRP-MERC-STRD 4 Door Standard Mercury

4-door standard mercury power supply designed for distributed power delivery in access control and security installations

• Distributes 24VDC power across 4 door circuits from a single consolidated unit.
• Eliminates per-door power supplies, reducing hardware count and install complexity.
• Mercury-based regulation sustains stable output under variable multi-door load conditions.

Lifesafety Power · E12S-BACKPLATE-ONLY

Lifesafety Power E12S-Backplate-Only E12S Backplate Only

Replacement backplate component for Lifesafety Power E12S series power supply systems

• Direct replacement backplate restores secure wall or rack mounting for E12S enclosures.
• Rated for 230VAC / 11W systems, matching original E12S power supply electrical specs.
• Supports vertical surface installation on drywall or metal frames for flexible deployment.

Lifesafety Power · E12S-BOXED

Lifesafety Power E12S-BOXED Enclosure with main backplate

Compact equipment enclosure designed for security integrators deploying centralized power distribution, battery backup, and control modules in

• Integrated main backplate eliminates field-fabricated wiring rails, cutting install time.
• Supports DIN-rail mounted power supplies, relay modules, and auxiliary control equipment.
• Wall or rack mountable — suits equipment rooms, electrical closets, and control cabinets.

Lifesafety Power · E2-2BS1

Lifesafety Power E2-2BS1 E2 enclosure size 16W x 20H x 4.5D

Compact battery enclosure sized 16 inches wide by 20 inches high by 4.5 inches deep

• Compact 16W×20H×4.5D-inch form factor fits shallow wall cavities and utility closets.
• Two-shelf internal layout organizes battery modules for access control or surveillance loads.
• 16W capacity suits single- or two-door access systems and low-power alarm control panels.

Lifesafety Power · E2V-BOXED

Lifesafety Power E2V-BOXED E2V-Boxed

Note: Limited specification data is currently available for this model

• Boxed form factor enables compact, ready-to-install deployment in tight spaces.
• 16W power rating supports low-draw security devices without oversizing the supply.
• Integrates within Lifesafety Power families alongside access and surveillance gear.

Lifesafety Power · E2X-BOXED

Lifesafety Power E2X-BOXED E2X Axis backplate 20x16x4.5

Backplate accessory from Lifesafety Power designed to mount behind Axis network cameras

• Purpose-built Axis camera backplate standardizes rough-in wiring and alignment.
• 20×16×4.5 in. profile fits standard North American 2-gang electrical boxes.
• Operates at 120VAC, integrating with standard North American power infrastructure.

Lifesafety Power · E4-3BS1

Lifesafety Power E4-3BS1 E4 Enclosure (3) shelves

Dedicated battery enclosure designed to house backup power components in surveillance and access control deployments

• Three internal shelves organize batteries and distribution modules in one enclosure.
• 24H × 20W × 6.5D in. form factor fits standard wall- or rack-mount deployments.
• Dedicated battery segregation improves thermal management and simplifies maintenance.

Lifesafety Power · E4A-BOXED

Lifesafety Power E4A-BOXED Enclosure E4A 24x20x6.5 black AMAG

24x20x6.5 inch black equipment enclosure designed to house power distribution, access control modules, and surveillance system components in security

• 24×20×6.5 in. black steel enclosure fits closets and wall cavities where racks won't.
• AMAG-compatible backplate supports DIN-rail modules and terminal blocks without adapters.
• Integrated ventilation openings prevent thermal buildup in continuous-duty deployments.

Lifesafety Power · E4H1-BOXED

Lifesafety Power E4H1-BOXED Honeywell Boxed Power Systems combine

UL-listed power distribution enclosure that pairs Lifesafety Power FlexPower modules with Honeywell access control hardware in a single compact

• UL-listed enclosure combines door control power and camera distribution in one chassis.
• Supports 24VDC outputs for EM locks, REX sensors, and door strike hardware.
• Single consolidated unit reduces footprint and simplifies wiring at access control convergence points.

Lifesafety Power · E4V-BOXED

Lifesafety Power E4V-BOXED E4V-Boxed

Boxed power supply from the Lifesafety Power catalog designed for security integration deployments requiring distributed power distribution

• Multi-output design consolidates power for several devices at one circuit point.
• Boxed form factor suits wall-mounted or DIN-rail cabinet installations.
• Compatible with third-party panels requiring redundant or supervised power circuits.

Lifesafety Power · E4V1-BOXED

Lifesafety Power E4V1-BOXED E4V1-Boxed

Compact power distribution unit designed to deliver regulated power to networked security devices in small-to-medium installations

• Delivers 150W regulated output to power multiple PoE security devices from one unit.
• Compact form factor suits small-to-medium installations with multi-device power needs.
• Synchronized DC output reduces voltage instability across cameras, readers, and controllers.

Lifesafety Power · E4X-BOXED

Lifesafety Power E4X-BOXED Axis Enclosure 24x20x6.5

24x20x6.5 equipment cabinet designed to house and protect Axis-compatible security system components in distributed deployments

• 24×20×6.5-inch cabinet fits PoE switches, power supplies, and cabling in one enclosure.
• Engineered for Axis system integration, supporting edge device stacks at distributed nodes.
• Compact footprint suits retrofit, warehouse, and perimeter sites where rack space is limited.

Lifesafety Power · E6-BOXED

Lifesafety Power E6-BOXED Enclosure E6 30x23x6.5 black no bac

Compact black equipment cabinet designed for mounting power distribution, control modules, and integration hardware in security installations

• 30×23×6.5 in. black cabinet fits constrained spaces while housing terminal blocks and relays.
• Supports 12VDC / 150W power distribution for access control and alarm monitoring modules.
• Powder-coat finish resists abrasion; no backplate included—plan component layout before install.

Lifesafety Power · E6B-BACKPLATE-ONLY

Lifesafety Power E6B-BACKPLATE-ONLY Backplate only for E6B enclos

Direct-fit replacement backplate assembly for the Lifesafety Power E6B power distribution enclosure

• Direct-fit replacement restores structural integrity of the E6B enclosure.
• Accommodates all DIN rail–mounted components and terminal blocks in the E6B series.
• Supports service rebuilds when original backplate shows damage, corrosion, or loose mounts.

Lifesafety Power · E6B1-DOOR-PLATE-ONLY

Lifesafety Power E6B1-DOOR-PLATE-ONLY Door plate for E6B1 Enclosu

Replacement door assembly for the Lifesafety Power E6B1 equipment enclosure

• Direct-fit replacement restores environmental sealing on E6B1 enclosures.
• Compatible with existing E6B1 hinge and latch mechanisms—no hardware swap needed.
• Supports refresh cycles and damage repair without replacing the full cabinet.

Lifesafety Power · E6M-BACKPLATE-ONLY

Lifesafety Power E6M-BACKPLATE-ONLY E6M Backplate Only

Mounting backplate designed for use with Lifesafety Power E6M power supply systems

• Dedicated mounting foundation for E6M power supply units in rack or wall installs.
• Sold standalone, enabling replacement of damaged hardware without full unit swap.
• Supports expansion of E6M deployments across multiple sites with correct fit alignment.

Lifesafety Power · E6M-BOXED

Lifesafety Power E6M-BOXED MCLASS multi-purpose Enclosure E6M-BOX

MCLASS multi-purpose equipment enclosure designed to house and protect power distribution, control modules, and integration hardware in security

• Houses MCLASS power distribution and control modules in a single enclosure.
• Supports centralized power management for surveillance and access control deployments.
• Cabinet form factor simplifies cable management and component consolidation on-site.

Lifesafety Power · E6M1-BOXED

Lifesafety Power E6M1-BOXED QUICK GUIDE Mercury Backplate

Quick-reference guide for the Mercury Backplate, designed to support field integrators deploying Lifesafety Power products

• Field quick guide covers pinout ID, terminal assignment, and wiring protocols.
• Includes functional verification steps to confirm correct operation before sign-off.
• Companion reference supports access control and power distribution deployment scenarios.

Lifesafety Power · E6M1-DOOR-PLATE-ONLY

Lifesafety Power E6M1-Door-Plate-Only E6M1-Door-Plate-Only

Replacement or standalone door strike plate component designed for integration with access control systems

• Plate-only format lets you reuse existing strike hardware, cutting retrofit costs.
• Designed for E6M1 series integration in single or multi-door access control deployments.
• Mechanical component with no electrical specs; installs with standard tools on any flat frame.

Lifesafety Power · E6P-BACKPLATE-ONLY

Lifesafety Power E6P-BACKPLATE-ONLY E6P Backplate Only

Dedicated mounting backplate for Lifesafety Power E6P power supplies

• Engineered exclusively for E6P series power supplies, ensuring precise fit and stability.
• Supports wall-mount and enclosure-mount installs with organized cable routing and thermal clearance.
• Operates at 230VAC input and 18VDC output, drawing only 11W for efficient power delivery.

Lifesafety Power · E6V-BOXED

Lifesafety Power E6V-BOXED E6V-BOXED

Compact power supply unit designed for IP security and access control installations where space is constrained or a standalone, encased form factor

• 150W output capacity supports cameras, readers, locks, and auxiliary loads in one unit.
• Boxed enclosure protects electronics during transport and simplifies multi-site inventory.
• Compact standalone form factor fits constrained-space installations without additional enclosure.

Lifesafety Power · E8-BOXED

Lifesafety Power E8-BOXED Enclosure E8 36x30x6.5 black no bac

Compact equipment enclosure measuring 36 inches wide by 30 inches tall by 6.5 inches deep, finished in black

• 36×30×6.5 in. shallow profile supports wall-mount in tight control room spaces.
• No-backplate design enables direct rear-connector access and custom wiring runs.
• Black steel enclosure houses Lifesafety Power supplies, switches, or control boards.

Lifesafety Power · E8A-BACKPLATE-ONLY

Lifesafety Power E8A-Backplate-Only E8A Backplate

Dedicated mounting backplate for power supply installations in security and access control deployments

• Dedicated backplate ensures repeatable, code-compliant mounting for the E8A chassis.
• Fits standard 19-inch or 23-inch racks and wall-mount frames for flexible deployment.
• Eliminates on-site fabrication, reducing installation time in access control builds.

Lifesafety Power · E8B-BACKPLATE-ONLY

Lifesafety Power E8B-Backplate-Only E8B-Backplate-Only

Replacement backplate assembly for the Lifesafety Power E8B power supply platform

• Replaces damaged E8B backplates without swapping the full power supply module.
• Mounts to wall studs, DIN rail, or cabinet surfaces using standard fasteners.
• Designed exclusively for the Lifesafety Power E8B series — verify model before ordering.

Lifesafety Power · E8B1-DOORPLATE-ONLY

Lifesafety Power E8B1-DOORPLATE-ONLY Door plate only for E8B1 enc

Replacement door plate assembly for the Lifesafety Power E8B1 equipment cabinet enclosure

• Direct replacement door plate restores E8B1 cabinet integrity after damage or wear.
• Field-replaceable assembly requires no factory recalibration, minimizing downtime.
• E8B1-exclusive fit — verify enclosure model to ensure compatibility before ordering.

Lifesafety Power · E8H-BACKPLATE-ONLY

Lifesafety Power E8H-Backplate-Only E8H-Backplate-Only

Replacement or spare mounting backplate for Lifesafety Power E8H series enclosures

• Replacement mounting backplate designed specifically for Lifesafety Power E8H series enclosures.
• Anchors E8H chassis to cabinet rails, wall studs, or DIN tracks using standard hardware.
• Prevents vibration-induced mechanical stress on internal components during long-term operation.

Lifesafety Power · E8H-BOXED

Lifesafety Power E8H-BOXED Honeywell Boxed Power Systems

Boxed power distribution unit from the Honeywell/Lifesafety Power line, designed to provision multiple devices in security and life-safety

• Pre-configured enclosure centralizes power distribution for multi-device security deployments.
• Reduces single-point failure risk versus individual adapters across camera or access control runs.
• Manufacturer-backed Lifesafety Power hardware suits rack or cabinet mounting in enterprise installs.

Lifesafety Power · E8H1-BOXED

Lifesafety Power E8H1-BOXED Unified Power Integrated Enclosures

Unified power distribution and integration enclosure designed to centralize power management and system supervision for security installations using

• Centralizes power distribution for up to 9 access panels in one enclosure.
• 36W × 30H × 6.5D-inch profile fits retrofit equipment rooms with limited depth.
• Native Pro-Watch integration simplifies commissioning on multi-door deployments.

Lifesafety Power · E8L-BACKPLATE-ONLY

Lifesafety Power E8L-BACKPLATE-ONLY Backplate for E8L enclosure

Replacement backplate assembly for the Lifesafety Power E8L power distribution enclosure

• Purpose-built replacement backplate restores E8L enclosure to full structural integrity.
• Designed exclusively for the E8L chassis, ensuring correct fit and electrical integration.
• Supports 230VAC / 11W distribution circuitry for field service and depot repair workflows.

Lifesafety Power · E8L-BOXED

Lifesafety Power E8L-BOXED Enclosure E8L 36x30x6.5 black

Compact wall-mount equipment cabinet designed to house power distribution, backup battery, and control electronics in surveillance and access control

• 36×30×6.5-inch wall-mount profile fits tight equipment rooms without floor space.
• Factory-fitted backplate speeds integration of LifeSafety Power modules and relay boards.
• Black powder-coat finish provides corrosion resistance for indoor and semi-protected environments.

Lifesafety Power · E8M-BACKPLATE-ONLY

Lifesafety Power E8M-BACKPLATE-ONLY Backplate for E8M enclosure

Replacement or spare backplate component for the Lifesafety Power E8M enclosure (Mercury variant)

• Direct replacement backplate maintains terminal alignment in E8M Mercury enclosures.
• Pre-drilled mounting positions streamline wiring organization and power distribution layout.
• Passive component requires no configuration, simplifying repair or new enclosure commissioning.

Lifesafety Power · E8M1-DOOR-PLATE-ONLY-BOXED

Lifesafety Power E8M1-Door-Plate-Only-Boxed Door Plate Only

Replacement door assembly for the Lifesafety Power E8M1 equipment cabinet

• Direct replacement door for E8M1 cabinet — restores enclosure integrity without full swap.
• Ships boxed separately, enabling targeted field replacement and simplified parts logistics.
• Mates with existing E8M1 hinges and latch points — no enclosure frame replacement needed.

Lifesafety Power · E8M2-BACKPLATE-ONLY

Lifesafety Power E8M2-BACKPLATE-ONLY E8M2BACKPLATEONLY

Replacement or spare mounting backplate for Lifesafety Power E8M2 series installations

• Replacement backplate maintains E8M2 series mounting integrity without full unit swap.
• Supports wall-surface and DIN-rail deployment for flexible cabinet configurations.
• Stocking a spare reduces downtime when expanding multi-cabinet E8M2 installations.