Middle Atlantic Wallrack with Plexi Door 15IN. Deep DWR Series Steel Textured Black - DWR-16-17PD

Middle Atlantic DWR-16-17PD 16U Pivoting Wall Rack with Plexi Door

The Middle Atlantic DWR-16-17PD is a 16-rack-unit pivoting wall rack built for security integrators and IT teams who need a UL-rated, seismically certified enclosure that doesn't demand a dedicated equipment room. At 15 inches of usable depth and a 200 lb UL load rating, it handles NVRs, switches, patch panels, and access control hardware in the same footprint — making it a practical choice for IDF closets, retail back rooms, and wall-space-constrained network edge deployments.

Overview

The DWR Series from Middle Atlantic is purpose-built for wall-mount deployments where swing-out access matters as much as capacity. The DWR-16-17PD pivots outward from the wall so you can reach the rear of equipment without pulling cable through a fixed enclosure — a real time-saver on service calls. The steel construction carries a black wrinkle powder coat finish that reads professional in client-visible spaces. TAA compliance means it qualifies for federal, state, and education procurement vehicles without an additional sourcing exemption. This unit is part of the broader wall mount rack category, and it's forward-compatible with Middle Atlantic's accessory ecosystem.

Key Features

• 16 RU / 28 in Usable Height: sixteen rack units gives you genuine flexibility — NVR on top, PoE switch in the middle, patch panel at the bottom — without the depth penalty of a floor-standing cabinet. The 28 inches of usable vertical space (71.1 cm) matches what you'd get from a half-height floor rack at a fraction of the floor footprint.
• 200 lb UL Load Capacity: UL-rated to 200 lbs (90.7 kg), this rack holds stacked NVRs and dense switching hardware without qualification anxiety. If your jurisdiction requires UL-listed enclosures for commercial installations, this clears that bar. The seismic load rating drops to 155 lbs (70.3 kg) in seismic-rated applications — plan accordingly if you're in a California or Pacific Northwest jurisdiction.
• 15 in Usable Depth: the 15-inch (38.1 cm) usable depth accommodates most 1U and 2U NVRs, managed PoE switches, and access control panels. Verify rear-connector depth on any 1U server before ordering — some dense compute units run 18–20 inches deep and won't fit.
• Plexi Front Door: the clear plexi door lets facilities staff verify indicator lights without unlocking the enclosure — useful in retail or school deployments where non-IT staff need visual status confirmation. The door provides physical access control without blocking visual inspection.
• Pivoting (Swing-Out) Design: the rack swings away from the wall on a pivot, exposing rear cable runs and equipment back panels without dismounting gear or fighting through a fixed enclosure. On a 16U deployment with six to eight devices, this is the difference between a 10-minute service call and a 45-minute one.
• Forward Rackrail Configuration: equipment mounts on forward rackrails, which keeps weight distribution toward the wall-anchor side and simplifies front-access cabling. Compatible with standard 19-inch rackmount equipment.
• TAA Compliant / CSA Standard TAA: meets Trade Agreements Act requirements for government and education procurement. Country of origin is Mexico — verify with your contracting officer if your solicitation requires domestic manufacturing.
• Seismic Rated: independently rated for seismic conditions at 155 lbs (70.3 kg). In California and other seismic-zone jurisdictions this matters for permit approval and liability — confirm local AHJ requirements before finalizing the load plan.
• Steel Construction, Black Wrinkle Powder Coat: the wrinkle texture hides minor surface marks better than gloss finishes — practical in active service environments where the enclosure takes the occasional bump. Steel construction keeps the unit rigid under full load; at 73.5 lbs (33.3 kg) unloaded, plan your wall-anchor spec accordingly.
• Forward Compatible: Middle Atlantic's forward-compatibility designation means accessories — shelves, blanks, fan panels, brush panels — designed for the DWR platform will fit future iterations. This matters if you're standardizing on one rack platform across multiple sites.

Integration and Compatibility

The DWR-16-17PD accepts standard 19-inch rackmount equipment across all 16 RU. It pairs naturally with PoE network switches, NVRs, and access control panels in a consolidated wall-mount footprint. If your deployment calls for cable management accessories — brush panels, lacing bars, blanks — Middle Atlantic's DWR accessory line is forward-compatible with this chassis. For multi-rack or higher-capacity builds, cross-reference the DWR family for 12U and 26U variants in the same footprint width. Consult your rack accessories options for cable management hardware that fits the DWR mounting pattern. The unit ships from Mexico; confirm origin documentation needs with your procurement team on TAA-restricted contracts.

Frequently Asked Questions

Q: What is the UL load capacity of the DWR-16-17PD, and does that change in seismic-rated applications?

A: The UL load capacity is 200 lbs (90.7 kg) in standard installations. In seismic-rated applications, the rated capacity drops to 155 lbs (70.3 kg). Plan your equipment load accordingly if your jurisdiction requires seismic compliance.

Q: Is the DWR-16-17PD TAA compliant?

A: Yes. The DWR-16-17PD carries TAA (Trade Agreements Act) compliance and meets the CSA TAA standard, making it eligible for federal, state, and education procurement contracts. Country of origin is Mexico.

Q: What is the usable depth for equipment inside the DWR-16-17PD?

A: Usable depth is 15 inches (38.1 cm). The overall enclosure depth is 17 inches (43.2 cm). Verify rear-connector depth on any appliance before ordering — equipment with connectors deeper than 15 inches from the front rackrail will not fit without modification.

Q: Does the DWR-16-17PD swing out from the wall for rear access?

A: Yes. The DWR Series uses a pivoting (swing-out) design that rotates the rack away from the wall, providing access to rear cable connections and equipment back panels without dismounting devices.

Q: What type of door does the DWR-16-17PD include?

A: The DWR-16-17PD includes a clear plexi front door, which allows visual inspection of equipment indicator lights without unlocking the enclosure.

Q: How many rack units does the DWR-16-17PD provide, and what is the usable height?

A: The DWR-16-17PD provides 16 rack units (RU) of mounting space. Usable height is 28 inches (71.1 cm). Overall enclosure height is 35.06 inches (89.1 cm).

Karl Wilson

The DWR-16-17PD hits a specific sweet spot that I see come up repeatedly on mid-size commercial builds: 16 RU of swing-out wall capacity at a 200 lb UL load rating, with a 15-inch usable depth that covers nearly every NVR, managed switch, or access control panel in the market without needing a floor-standing cabinet. For integrators designing systems in retail back-of-house, school IDF closets, or small office server alcoves, this is frequently the right chassis before you even look at alternatives.

Technical Highlights:

• 200 lb UL / 155 lb Seismic: the UL rating at 200 lbs handles a fully loaded 16U — NVR, PoE switch, patch panel, blanks — without margin anxiety. The seismic derating to 155 lbs is meaningful; if you're installing in California or a Pacific Northwest jurisdiction with seismic permit requirements, budget that 45 lb headroom into your load plan before signing off.
• 15 in Usable Depth: this is where most wall rack specs fall short on real deployments. At 15 inches (38.1 cm), the DWR-16-17PD accommodates enterprise-grade 1U and 2U appliances. The one exception to watch: high-density compute with rear PSU and connector stacks — measure your specific hardware before committing.
• Pivot / Swing-Out Mechanism: on a 16U populated rack, rear cable access in a fixed wall enclosure is a real service liability. The pivot design on the DWR-16-17PD eliminates that — you rotate the assembly out, work the rear, and close it back. That's not a convenience feature; on a client site where downtime is billable, it's a labor-cost decision.

Deployment Considerations:

• At 73.5 lbs (33.3 kg) unloaded with a 200 lb capacity, wall anchor selection is non-negotiable. Confirm stud locations and anchor hardware rating before installation — drywall anchors alone will not support a fully populated unit.
• The plexi door provides visual access but not ventilation — if your equipment list includes high-heat appliances (dense GPU NVRs, high-port-count PoE switches), plan for active ventilation via a fan panel or verify thermal specs against enclosure airflow before finalizing the design.

For a school district IDF or a multi-location retail chain standardizing on a single wall-rack platform, the DWR-16-17PD's TAA compliance, seismic rating, and forward-compatibility with the DWR accessory ecosystem make it a clean, defensible spec — one that survives both the procurement review and the five-year service window.