Middle Atlantic VWM-SPD-4216-WT Split Plexi Front Door, 42H × 16D, White

The Middle Atlantic VWM-SPD-4216-WT is a split plexi front door designed specifically for the Middle Atlantic VWM series wall-mount rack enclosures — a direct replacement or upgrade option when you need front-panel visibility into active equipment without pulling the door entirely. At 42 inches tall and 16 inches deep, it fits the full-height VWM footprint and ships in a textured white powder coat finish, matching white enclosure deployments in classrooms, conference rooms, and clean-aesthetic environments where a black rack would stand out.

Key Features

• Split Plexi-Glass Panel: The two-panel split design lets you swing open either half independently — useful when you need quick access to patch cables or indicator lights mid-deployment without clearing a full-length door swing. Visibility through the plexi keeps you aware of LED status and airflow without opening anything.
• Steel Construction with Plexi Inserts: The frame is steel, so it holds shape under the mechanical stress of repeated openings and the weight of any cable management routed near the door. The plexi inserts resist shattering better than glass and can be cleaned without scratching if you use appropriate non-abrasive wipes.
• Textured White Powder Coat Finish: Powder coat is a harder, more chip-resistant surface than painted steel — in a frequently-accessed wall rack, that matters. The textured white finish (matching the standard VWM white enclosure family) stays consistent across products ordered at different times, avoiding visible color mismatches in visible installations.
• 25mm × 150mm Swing Handle: The oversized 150mm handle gives a firm grip for technicians in a hurry, and the 25mm profile keeps it from snagging rack cables routed along the sides. Handle size is practical — not decorative.
• 42-Inch Height Profile: At 42 inches (106.7 cm), this door accommodates a full-height VWM enclosure. If you're running a 16U or 20U shorter enclosure in the same series, measure your enclosure height before ordering — this door is spec'd for the 42H frame specifically.
• TAA Compliant: The VWM-SPD-4216-WT is TAA compliant, which means it qualifies for U.S. federal, state, and municipal procurement where the Trade Agreements Act applies. If you're quoting a government project, this is the door to specify rather than sourcing a non-compliant alternative.
• RoHS and Prop 65 Compliance: RoHS compliance means restricted hazardous substances are out of the build — relevant for any deployment in an EU-export environment or for organizations with environmental procurement standards. Prop 65 disclosure is included per California requirements.
• Product Weight 27.7 lbs (12.6 kg): Know this before you start a solo install. At just under 28 pounds, mounting and aligning the door on an already-populated rack is a two-person job — especially when working at height on a wall-mount enclosure. Plan accordingly.

Integration & Compatibility

The VWM-SPD-4216-WT is purpose-built for the Middle Atlantic VWM wall-mount rack series. It is not a universal door — verify your enclosure's height (42H) and depth (16D) before ordering. The split plexi design integrates with the VWM door hinge system; if you're replacing a damaged door or adding a door to a previously open-face enclosure, confirm the hinge points and latch receiver are present on your specific VWM chassis.

For AV and security integrations where the enclosure sits in a visible area — a lobby equipment room, a classroom AV closet, or a retail back-office — the white finish and plexi window provide a professional appearance without requiring a separate decorative cover. If your installation is in a server room or wiring closet where aesthetics aren't a factor, consider whether the standard VWM door variants better suit the environment.

TAA compliance makes this door appropriate for government facilities, K-12 and higher education procurement, and defense contractor environments where the entire rack assembly must meet TAA requirements — not just the enclosure chassis.

Frequently Asked Questions

Q: Is the VWM-SPD-4216-WT TAA compliant for government procurement?

A: Yes. The VWM-SPD-4216-WT is TAA compliant, making it eligible for U.S. federal, state, and municipal purchasing under Trade Agreements Act requirements.

Q: What enclosure series does the VWM-SPD-4216-WT fit?

A: It is designed for the Middle Atlantic VWM (wall-mount) rack enclosure series. Confirm your enclosure is 42 inches high and 16 inches deep before ordering — this door is spec'd to those dimensions specifically.

Q: What is the finish on the VWM-SPD-4216-WT?

A: Textured white powder coat — a chip-resistant, durable surface that matches other white VWM series enclosure components for consistent appearance across the installation.

Q: How heavy is the VWM-SPD-4216-WT?

A: The product weighs 27.7 lbs (12.6 kg). The shipping weight is 47 lbs (21.3 kg) including packaging. Two-person installation is advisable, especially on an already-populated wall-mount rack.

Q: What materials is the VWM-SPD-4216-WT made from?

A: Steel frame with plexi-glass panel inserts. The split-panel design uses two plexi sections, each independently accessible via the 25mm × 150mm swing handle.

Q: Is the VWM-SPD-4216-WT RoHS compliant?

A: Yes. The VWM-SPD-4216-WT meets RoHS requirements, restricting hazardous substances from the build. It also carries Prop 65 and TSCA disclosures.