Middle Atlantic VWM Door W/plexi 42H X 10D Black - VWM-SPD-4210-BW

Middle Atlantic VWM-SPD-4210-BW Split Plexi Front Door, 42U, Black

Overview

The Middle Atlantic VWM-SPD-4210-BW is a 42-unit split plexi front door designed for the Middle Atlantic VWM wall-mount rack series. At 42 inches tall and 2 inches deep, this steel-and-plexi door closes off the front of open-frame VWM enclosures — protecting installed AV, networking, and security gear from physical contact and incidental damage without blocking visual inspection of rack-mounted equipment. The swing handle (25mm x 150mm) provides tool-free access while keeping the door secure during normal operation. Black wrinkle powder coat finish blends with standard rack environments and resists surface wear in high-traffic spaces. At 26.8 lbs product weight, plan for adequate wall-anchor capacity when speccing installation on VWM enclosures. The VWM-SPD-4210-BW carries TAA compliance and RoHS certification, making it suitable for government and regulated commercial deployments.

Compatibility

Designed exclusively for the Middle Atlantic VWM series wall-mount rack enclosures in the 42U, 10-inch-deep configuration. Confirm your VWM base unit matches the 42H x 10D footprint before ordering — depth and height must align with the door's 42-inch height and 2-inch door swing envelope. This door is not cross-compatible with other Middle Atlantic rack lines (e.g., ERK, BGR, or WMRK series) or third-party enclosures. If your installed VWM is a different height (e.g., 25U, 30U) or depth, a different SPD variant is required. TAA compliance means this accessory integrates cleanly into GSA-schedule and federally funded deployments where the rack accessory supply chain must meet trade agreement requirements.

Installation Notes

The split plexi design means the door ships in two panels — verify both panels are present before starting installation. The 2-inch depth adds to the overall enclosure footprint; confirm wall clearance ahead of mounting. Swing handle orientation and hinge attachment points are fixed to the VWM door frame, so the installation does not require drilling into the door itself. At 45 lbs shipping weight, two-person handling is practical for lift and alignment during install.