ACTi Vandal Resistant IP Rated Voice Down - ACS-E1CB-RETRO-KIT

ACTi ACS-E1CB-RETRO-KIT Vandal Resistant IP Rated Voice Down

Overview

The ACS-E1CB-RETRO-KIT is a retrofit-mount voice down speaker assembly designed for ACTi dome cameras where physical tampering and weather exposure are deployment concerns. This kit adds two-way audio capability to existing domes while maintaining vandal resistance and IP-rated environmental protection — critical when cameras are installed in high-traffic retail, parking, or outdoor access-control zones where speakers may face deliberate abuse or sustained moisture.

Compatibility

This retrofit kit is designed for ACTi dome camera platforms. Verify exact compatible models with your ACTi documentation or pre-sales engineering before ordering — retrofit compatibility depends on dome housing revision and mounting bracket clearance. The kit integrates with standard ACTi two-way audio signal paths and does not require custom wiring harnesses for compatible platforms.

Installation Notes

Retrofit mounting requires access to the dome's underside or shroud. Ensure the installation location allows sufficient speaker cavity clearance to avoid audio distortion from blocked resonance. Verify power availability on the camera's audio output circuit — the speaker assembly draws minimal current but must be wired through a properly rated termination block. Weatherproofing: all external seams must be sealed with silicone after installation to maintain IP rating in outdoor deployments. Do not exceed the manufacturer-specified audio output voltage to avoid speaker damage.

What's in the Box

• 1x vandal-resistant speaker assembly
• 1x mounting bracket
• Fasteners and weatherproof sealant (as supplied)