ACTI Exterior Fixed Dome - Acs-E1CB-Adu-Bosch-Pb-NDM7703AL

ACTi ACS-E1CB-ADU-BOSCH-PB-NDM7703AL Exterior Fixed Dome

Overview

The ACS-E1CB-ADU-BOSCH-PB-NDM7703AL is an exterior fixed dome housing designed for integration with Bosch surveillance systems. This mount assembly supports permanent outdoor installation where a fixed field of view meets your coverage requirements. The dome form factor shields optics and electronics from rain, dust, and UV exposure — critical for rooftop, soffit, and perimeter wall deployments running 24/7 without servicing intervals.

Compatibility

This housing is engineered for Bosch security camera modules and systems identified by the Bosch part designation embedded in the MPN. Verify your specific Bosch camera model against the documentation before ordering — dome housings are form-factor-specific and cannot accommodate different sensor or lens geometries. If you are integrating ACTi-branded cameras or third-party ONVIF-compatible surveillance equipment, confirm mechanical fit with the manufacturer before installation.

Installation Notes

Exterior fixed domes are mounted to wall or ceiling structures using the integrated bracket and hardware supplied with the assembly. Ensure mounting surface can support the combined weight of the dome, camera module, and bracket — typically 2–5 lbs depending on optics. Seal all cable entry points with weatherproof glands to maintain IP rating and prevent water intrusion into the electrical pathway. Install in locations where the fixed angle delivers the required field of view — repositioning a fixed dome after mounting requires complete removal and reinstallation. Do not exceed the environmental operating range specified by the camera manufacturer — confirm temperature and humidity limits before deploying in extreme climates (arctic, desert, high-humidity coastal zones).