Panduit UPDUCRD11 30A Universal PDU Power Cord

The Panduit UPDUCRD11 is a 30-amp power cord engineered for G5 Universal PDU installations in datacenters, server rooms, and equipment racks where reliable high-current distribution is non-negotiable. This 10-foot cord set bridges your Panduit uPDU chassis to facility power via a NEMA L15-30P locking plug, delivering 30A capacity in a compact IP20-rated package. Built for IT infrastructure and critical-load environments, the UPDUCRD11 eliminates the guesswork in matching PDU chassis connectors to facility circuits—Panduit's Universal connector on one end, standardized L15-30P on the other, ready to install.

Key Features

30-amp current capacity for high-density rack power distribution

NEMA L15-30P locking facility plug prevents accidental disconnection

Universal connector fits all G5 Panduit uPDU chassis models

10-foot (3-meter) length provides routing flexibility in rack environments

IP20-rated construction for indoor electrical enclosures

Black jacket blends into rack cable management systems

Datacenter and IT infrastructure deployments demand power cords that won't fail under sustained load or vibration. The UPDUCRD11 uses Panduit's Universal connector system—a keyed interface that mates exclusively with Panduit G5 uPDU chassis, preventing cross-connection errors during installation or maintenance. The facility side terminates in a NEMA L15-30P plug, a three-phase locking connector rated for 30 amps at 250V. The twist-lock design ensures the plug stays seated even when subjected to cable pulls, equipment moves, or seismic activity. Unlike friction-fit connectors, the L15-30P requires deliberate rotation to release, virtually eliminating nuisance disconnects that can take entire racks offline.

At 10 feet, the UPDUCRD11 gives you enough reach to route cleanly from floor-mounted or overhead facility circuits to mid-rack PDU locations without excess cable cluttering your vertical cable managers. This length works for typical raised-floor datacenters, wall-mounted PDU installations, and two-post rack environments where the facility outlet is within 8 feet of the PDU mounting position. The 3-meter run also keeps voltage drop negligible—at 30A over 10 feet of properly-sized conductors, you're well within NEMA tolerances for maintaining rated voltage at the PDU input. For longer runs, Panduit offers extended-length variants, but the UPDUCRD11's 10-foot spec hits the sweet spot for the majority of single-rack and adjacent-rack PDU deployments.

The Universal connector on the PDU side is Panduit's answer to the cable-compatibility problem that plagues mixed-vendor rack infrastructure. Instead of stocking separate cords for different PDU models, the Universal design works across the entire G5 Panduit uPDU family—whether you're connecting a basic metered PDU or a switched model with per-outlet monitoring. This standardization reduces inventory complexity for integrators managing multiple sites and speeds up replacements during maintenance windows. The connector's keying also prevents accidental over-voltage conditions—if the plug doesn't fit, you know immediately that you've grabbed the wrong cord, rather than discovering the mismatch after you've energized the circuit.

Panduit manufactures this cord set to the same standards as their structured cabling and wire management products—molded strain relief at both terminations, UL-recognized conductors, and factory testing for continuity and insulation integrity. The black PVC jacket is rated for indoor use (IP20) and resists abrasion from contact with rack rails, cable ties, and adjacent equipment. For commercial integrators and datacenter operators, the UPDUCRD11 represents a known-good component in your power distribution chain, eliminating one more variable when troubleshooting circuit faults or planning capacity upgrades. Pair it with Panduit's G5 uPDUs and you have a documented, supportable power path from facility breaker to equipment inlet—critical when uptime SLAs and insurance audits come into play.