Ubiquiti USP-PDU-PRO 45-Port PoE Power Switch
The Ubiquiti USP-PDU-PRO is a rack-mount power distribution and intelligent switching solution built for distributed UniFi infrastructure deployments. This unit consolidates two critical functions—managed AC power distribution and gigabit network switching—into a single 1U chassis, eliminating the need for separate PDU and network switch hardware in constrained rack environments.
Overview
Designed for integrators managing multi-site UniFi installations, the USP-PDU-PRO delivers 1,875W total power output capacity distributed across managed outlet groups, with three gigabit Ethernet ports plus one 100 Mbps management port. The internal AC/DC conversion runs at 40W efficiency overhead, meaning most of the 1,875W budget stays available for connected devices rather than wasted as heat in confined cabinet spaces. Input draws from standard 125V AC at 15A (supporting 50/60 Hz globally), and the SGCC steel enclosure handles both climate-controlled data centers and outdoor cabinet installations operating from 0 to 40°C without performance degradation.
Key Features
- 1,875W Power Budget: Enough to support clusters of PoE access points, switches, and edge appliances simultaneously without daisy-chaining separate PDUs. Distributed across outlet groups with per-outlet power sequencing—if one device fails, you can remotely reboot just that outlet instead of bringing down the whole rack.
- Remote Power Cycling via Ethernet: Network-managed reboot capability eliminates truck rolls for unresponsive equipment at branch offices or remote sites. Critical when hands-on access is limited or expensive.
- Three Gigabit Ports: Beyond the management interface, these provide real network bandwidth for site-to-site links or connecting downstream switches—not just slow monitoring ports.
- UniFi Controller Integration: Centralized visibility and control through your existing UniFi Network Controller dashboard. Power consumption, outlet status, and temperature trending all appear in the same interface where you manage access points and switches, reducing tool proliferation.
- Compact 1U Footprint (442.4 x 87.4 x 106 mm): Fits standard 19-inch racks alongside other UniFi infrastructure without consuming extra vertical space. Weighs 3.5 kg (7.6 lb), so no special mounting considerations.
- NDAA Compliance & FCC/IC Certification: Meets federal procurement requirements for regulated environments and North American infrastructure deployments. Relevant if your customer list includes government, critical infrastructure, or defense contractors.
Deployment Scenarios
The USP-PDU-PRO excels where power and network intelligence must work together. Campus networks with distributed access points benefit from centralized outlet control—if an AP hangs, the controller can reboot it remotely. Branch office deployments where IT staff visit quarterly find the remote reboot capability essential for uptime between service calls. Edge compute clusters running UniFi Dream Machines or security appliances alongside PoE cameras and APs appreciate the consolidated power and network backbone in a single unit.
When to Choose a Different Model
If your deployment requires substantially higher power capacity (>2 kW continuous load) or more than three gigabit network ports, evaluate higher-capacity Ubiquiti power infrastructure offerings. If you need extensive outlet count without the network switching feature, a standard PDU may be simpler. The USP-PDU-PRO optimizes for integrated power + network, not raw outlet density or power alone.
Integration & Compatibility
The USP-PDU-PRO integrates with UniFi Network Controller for unified management. Standard Ethernet connectivity allows integration into existing SNMP, syslog, or automation workflows if desired. Verify MPN USP-PDU-PRO during procurement to ensure compatibility with your UniFi power management architecture and rack physical dimensions.
What's in the Box
No specific package contents were detailed in manufacturer documentation. Verify what mounting hardware or cables are included with your specific unit during receipt.
Frequently Asked Questions
Q: Can I remotely reboot individual outlets on the USP-PDU-PRO, or only the entire unit?
A: Per-outlet power sequencing and remote reboot capabilities are supported—you can reboot a single unresponsive device without affecting others on the same PDU.
Q: What is the management interface for the USP-PDU-PRO?
A: The unit integrates with UniFi Network Controller for centralized visibility and control. A dedicated 100 Mbps Ethernet management port provides out-of-band access if needed.
Q: Is the USP-PDU-PRO suitable for outdoor cabinet deployments?
A: Yes. Operating range of 0 to 40°C and SGCC steel construction support both climate-controlled data centers and outdoor cabinet installations.
Q: Does the USP-PDU-PRO come with network cables or power cords?
A: Manufacturer documentation does not specify package contents. Confirm what cables and hardware are included with your order.
Q: Is the USP-PDU-PRO NDAA-compliant?
A: Yes, NDAA compliance is certified, along with FCC/IC certifications for North American deployment.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The USP-PDU-PRO (often searched as USP PDU PRO) solves a real problem in UniFi ecosystem deployments: the need to manage power and network from one interface without burning extra rack space or management overhead. That 1,875W budget powering three gigabit ports in 1U is the right balance for most distributed UniFi sites—large enough to support mixed infrastructure, compact enough to fit anywhere.
Technical Highlights:
- 1,875W Capacity + 40W Efficiency Overhead: Leaves 1,835W usable power for connected devices. Compare this to inefficient PDUs dumping 60–80W as waste heat in a sealed cabinet—on a multi-site deployment, efficiency compounds quickly into real operating-cost savings.
- Per-Outlet Remote Reboot: Not all PDUs support this. Being able to power-cycle a single hung access point or edge appliance from the controller dashboard eliminates the alternative: a technician truck roll, which costs $200–400 minimum. Even one avoided trip per year pays for smarter power management.
- Three Gigabit Network Ports: Most PDUs offer only slow management ports. These three gig ports allow real site-to-site connectivity or cascading downstream switching without bottlenecking your infrastructure.
Deployment Considerations:
- The 1,875W capacity assumes full load sharing across outlets. If you have a single device drawing 1,500W continuously, power sequencing becomes less useful—size accordingly for your actual mixed loads.
- 100 Mbps management port is adequate for monitoring and reboot commands, but don't expect to stream logs or large controller backups over this interface. Use the gigabit ports for actual data traffic.
- 0 to 40°C operating range means outdoor cabinets in hot climates (summer highs above 100°F) will sit at the upper limit—not a showstopper, but watch thermal margin if you're stacking heat-generating equipment inside the same cabinet.
Position the USP-PDU-PRO where you have multiple UniFi access points, switches, and edge appliances sharing rack or cabinet space across 3–10 distributed sites. It's the glue that keeps power distribution simple and visible without adding separate management tools or consuming valuable vertical rack space.
