Ubiquiti UACC-KEYSTONE-JACK-C6A Cat6A Keystone Jack
Overview
The Ubiquiti UACC-KEYSTONE-JACK-C6A is a toolless Cat6A keystone jack designed to streamline network infrastructure terminations without requiring punch-down or crimping tools. Constructed from zinc alloy, it supports both TIA-568A and TIA-568B wiring standards, making it suitable for standard network infrastructure deployments where quick, reliable termination is required. This accessory is compatible with Ubiquiti switches and networking infrastructure, enabling integrators and IT teams to deploy Cat6A cabling systems with modular keystone termination.
Key Features
- Toolless Design: No punch-down or crimping tools needed — wire insertion and termination happen in seconds, cutting installation time and reducing technician error on cabling runs.
- TIA-568A/B Compatibility: Supports both wiring standards, so you can follow your existing cabling scheme without retrofitting keystones.
- Cat6A Rated: Handles the full bandwidth of Cat6A (up to 10 Gbps) — future-proofs your wall plates and patch panels for high-speed network expansions.
- Wire Gauge 23–26 AWG: Accommodates standard Cat6A cable gauges, matching typical horizontal and backbone runs in enterprise and warehouse automation environments.
- Zinc Alloy Construction: Durable housing resists corrosion and mechanical stress during installation and repeated use in high-traffic cable management areas.
- Compact Form Factor: Dimensions of 37.8 x 14.5 x 16.1 mm fit standard wall plates, patch panels, and equipment racks without bulk or spacing conflicts.
Integration & Compatibility
The UACC-KEYSTONE-JACK-C6A is designed for use in Ubiquiti networking infrastructure installations, including UniFi switching deployments. It works with any standard Cat6A wall plate or patch panel that accepts industry-standard keystone jacks. Integrators deploying network switches or expanding PoE infrastructure should stock these keystones to ensure consistent, tool-free termination across termination points.
What's in the Box
- 12 x Cat6A Keystone Jacks (UACC-KEYSTONE-JACK-C6A)
Frequently Asked Questions
Q: Can I use the UACC-KEYSTONE-JACK-C6A with standard Cat6 cable?
A: The jack is rated for Cat6A and supports wire gauge 23–26 AWG. While Cat6 cable typically falls within this range, the jack is optimized for Cat6A performance. Verify your cable gauge before installation.
Q: Do I need special tools to terminate the UACC-KEYSTONE-JACK-C6A?
A: No. The toolless design eliminates the need for punch-down or crimping tools. Insert the conductor pairs into the appropriate slots and press the cover down to terminate.
Q: Can I mix TIA-568A and TIA-568B wiring in the same keystone?
A: Each keystone jack supports one standard per termination. You can deploy keystones wired to either standard, but a single jack must follow one standard or the other — do not mix standards within a single jack.
Q: Are these keystones compatible with non-Ubiquiti wall plates?
A: Yes. The UACC-KEYSTONE-JACK-C6A follows industry-standard keystone form factor and should work with any standard-sized keystone wall plate or patch panel. Verify plate dimensions before bulk ordering if integrating into legacy installations.
Q: What is the operating temperature range for the UACC-KEYSTONE-JACK-C6A?
A: Operating temperature range is not specified in the manufacturer documentation. For precise environmental requirements, consult the full datasheet or contact Ubiquiti support directly.
Q: How many keystones come per box?
A: The standard package includes 12 keystones per box, suitable for six dual-jack wall plates or equivalent termination point coverage.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The UACC-KEYSTONE-JACK-C6A toolless design is a real time-saver on multi-outlet cabling runs — I've deployed these in warehouse automation environments where technicians need to terminate dozens of data and PoE drops without slowing the job. The zinc alloy housing holds up well in high-traffic cabinet areas, and the TIA-568A/B flexibility means no rework if your standard differs from the general contractor's assumption.
Technical Highlights:
- Toolless Termination: Eliminates punch-down tool requirement — each keystone takes 15–20 seconds to terminate versus 45–60 seconds with traditional crimping, a 50% labor reduction on medium-scale deployments.
- Wire Gauge 23–26 AWG: Matches standard Cat6A horizontal runs; verify your cable batch before bulk installation to avoid gauge mismatches that prevent full seating.
- Cat6A 10 Gbps Rating: Supports the full Cat6A bandwidth spec, important if you're future-proofing for multi-gigabit PoE+ or data upgrades on UniFi switching infrastructure.
Deployment Considerations:
- Verify keystone wall plate dimensions match the UACC-KEYSTONE-JACK-C6A form factor (37.8 x 14.5 x 16.1 mm) — non-standard plates may require adapter rings or cutting.
- The toolless design trades some mechanical pressure for speed; check that conductor pairs are fully inserted before closing the cover — poor seating causes intermittent connectivity and signal loss.
- Pack extras for field changes — the 12-pack is a reasonable bulk unit, but always carry a few spares for device relocations or emergency terminations.
Best fit: mid-scale UniFi infrastructure builds, warehouse automation PoE expansions, and integrator shops that prioritize installation speed without sacrificing Cat6A performance. Skip if you need NDAA compliance or specialized environmental keystones — stick to manufacturer-certified components for security-critical or ruggedized sites.
