Ubiquiti UACC-G4-DBP-CABLE-USB-7M PoE to USB-C Cable
Overview
The UACC-G4-DBP-CABLE-USB-7M is a 7-meter shielded PoE-to-USB-C cable purpose-built to deliver power and signal to UniFi G4 Doorbell Pro units when the PoE switch or injector must sit at distance from the doorbell. This extended run solves the common install constraint of limited PoE device proximity — mount the doorbell wherever network sightlines require, then run this cable back to your central power source. The cable features stranded copper conductors with shielded twisted pair (STP) construction, which suppresses electromagnetic interference in electrically dense environments (server rooms, proximity to high-voltage conduit, or areas with dense Wi-Fi infrastructure).
Compatibility
Connects directly to UniFi G4 Doorbell Pro devices via USB-C connector. Works with any standard PoE power source (802.3af or higher) that supports the doorbell's power draw. Compatible with indoor and outdoor installations within the specified temperature operating range.
Installation Notes
Operating temperature range -20 to 60°C (-4 to 140°F) — confirm your deployment zone falls within this window before spec'ing the run. Minimum bend radius is 19.2 mm (0.76 in); avoid sharp 90-degree kinks that can degrade signal integrity or damage internal conductors over time. Cable jacket is white thermoplastic elastomer (TPE) with 4.8 mm diameter — measure your conduit or cable tray openings to ensure clearance. VW-1 flame rating per UL1581 meets standard fire codes for in-wall and suspended ceiling runs. Weight is 326 g (11.5 oz) per 7-meter length — account for support spacing if running horizontally unsupported over long distances.
