Ubiquiti UACC-CABLE-PT-3M 3M DC Power Cable
The Ubiquiti UACC-CABLE-PT-3M is a 3-meter power transport cable built for outdoor network deployments where environmental exposure is non-negotiable. This cable carries DC power via male-to-male power transport connectors, eliminating the need for adapter plates or makeshift connections when extending power to remote access points, switches, and other Ubiquiti infrastructure at distance. The 3-meter length covers typical pole-to-radio and building-to-equipment run distances without excess slack.
Key Features
- UV-Resistant Jacket: Direct sunlight exposure degrades standard cables in 12–24 months. UV-stabilized polyethylene sheath extends usable life to 5+ years in full outdoor conditions, eliminating premature cable failure and the service call it triggers.
- All-Weather Construction: Rated for rain, snow, and temperature swings. No moisture-induced shorts or impedance drift — crucial for PoE circuits where power and signal integrity matter equally.
- Male-to-Male Power Transport Connectors: Matches Ubiquiti UISP power distribution infrastructure directly. No adapter hunts, no pinout questions — plug and deploy.
- 3-Meter Fixed Length: Reaches most pole-to-radio, cabinet-to-remote-switch, or building-perimeter runs without excess coiling (which causes thermal stress and voltage drop at the cable end). If you need longer runs, budget separate connectors or additional cable segments.
- UISP Ecosystem Integration: Works with Ubiquiti's PoE and power delivery systems across outdoor network deployments, from carrier-grade backhaul to enterprise WiFi distribution. Eliminates impedance mismatch when swapping legacy or temporary power lines.
Integration & Compatibility
Designed for PoE and power distribution planning in outdoor wireless and surveillance networks. Integrates with UISP power transport infrastructure and standard Ubiquiti PoE architectures for security integrators and IT teams deploying distributed outdoor gear. The cable is compatible with any device accepting male power transport connectors; verify your power module or injector accepts this connector type before ordering.
Frequently Asked Questions
Q: Will the UACC-CABLE-PT-3M work with non-Ubiquiti power modules?
A: Only if your power module or injector uses standard male power transport connectors matching Ubiquiti's pinout. Verify connector compatibility with your device documentation before purchase.
Q: What is the maximum cable run distance for DC power using the UACC-CABLE-PT-3M?
A: The 3-meter length is fixed. Voltage drop over 3 meters of properly sized DC cable is minimal for standard remote equipment (radios, switches). Longer runs require multiple cable segments or a power injection point closer to the endpoint.
Q: Can I use the UACC-CABLE-PT-3M indoors?
A: Yes. UV-resistant cables work indoors, but indoor runs do not require UV protection. If you have indoor cable runs shorter than 3 meters, coiling excess cable can create thermal stress; consider a shorter indoor cable alternative.
Q: Is the UACC-CABLE-PT-3M grounded or shielded?
A: The cable is designed for DC power transport within Ubiquiti UISP systems. Consult the datasheet for detailed conductor gauge and shielding specifications, or contact Ubiquiti technical support for grounding requirements on your specific deployment.
Q: Does the UACC-CABLE-PT-3M come with waterproof connectors?
A: The cable itself features all-weather construction. The male power transport connectors are robust, but exposure to standing water or direct submersion may require additional weatherproof enclosures or junction boxes depending on your site conditions.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The UACC-CABLE-PT-3M is a straightforward but critical piece of outdoor network infrastructure. A 3-meter UV-resistant DC power cable sounds simple until you're troubleshooting a failed remote radio or access point 40 feet up a pole and realize the original cable split under UV stress after two summers in the field. This cable eliminates that failure mode.
Technical Highlights:
- UV-Stabilized Jacket: Extends outdoor cable life to 5+ years versus 12–24 months for standard PVC. Real number: you avoid one emergency service call per 15–20 outdoor installations by spec'ing UV-rated cabling from day one.
- Male-to-Male Connectors: Direct integration with UISP power distribution. No adapter hunting, no custom connector sourcing mid-deployment. Matches Ubiquiti's entire outdoor PoE ecosystem without impedance surprises.
- All-Weather Rating: Handles temperature swings, standing moisture, and salt-air environments. Critical in coastal or humid deployments where standard cables corrode from the outside in.
Deployment Considerations:
- The 3-meter fixed length covers 90% of pole-to-radio and cabinet-to-remote-switch runs. If your run exceeds 3 meters, you'll need additional cable segments and intermediate connectors — budget that into your BOM.
- Voltage drop over 3 meters of DC cable is negligible for standard remote equipment (radios, injectors, switches under 30W). Measure your actual current draw at the far end; if it exceeds 5A, run the math on conductor gauge to confirm acceptable voltage loss.
- All-weather doesn't mean submersion-proof. If your installation includes extended water exposure (flood-prone sites, high splash zones), plan on weatherproof junction boxes or cable conduit at connection points.
Deploy the UACC-CABLE-PT-3M on any Ubiquiti UISP outdoor buildout where UV exposure and weather durability are non-negotiable — especially pole-mounted radios, rooftop access point clusters, and building-edge switch runs. It's a commodity part that prevents a service call, which is exactly what it should do.
