Ubiquiti UACC-CABLE-PATCH-OUTDOOR-3M-BK 3-Meter Outdoor Patch Cable
Overview
The Ubiquiti UACC-CABLE-PATCH-OUTDOOR-3M-BK is a 3-meter outdoor-rated patch cable engineered for UISP (Ubiquiti Internet Service Provider) infrastructure deployments in exterior environments. Standard indoor Ethernet cables degrade rapidly when exposed to UV, temperature cycling, and moisture — the UACC-CABLE-PATCH-OUTDOOR-3M-BK addresses this by incorporating weather-resistant construction that maintains signal integrity across outdoor backbone runs, edge device interconnects, and site-to-site links without the cost and complexity of conduit or indoor-rated cabling runs.
Key Features
- 3-Meter Length: Standard backbone cable run — long enough to span equipment racks or bridge external cabinet-to-cabinet links without intermediate connectors that introduce failure points and signal loss.
- Outdoor-Rated Construction: UV-stabilized jacket and weather-resistant materials prevent jacket cracking, color fade, and conductor exposure that plague standard patch cables in direct sunlight and temperature extremes. Critical for permanent exterior installations where cable replacement is costly and disruptive.
- UISP Compatibility: Designed and validated for Ubiquiti UISP equipment, ensuring connector pinout and impedance match UISP device expectations. Eliminates compatibility ambiguity in mixed-vendor deployments.
- Standard Patch Cable Connectivity: Supports RJ-45 connections for Ethernet-based network links — consistent with telecom and ISP infrastructure wiring standards, so integrators can use existing termination practices and test equipment.
- Suitable for Backbone and Access Links: Deploy on outdoor wireless repeater connections, fiber-to-copper transitions, or bridging long-distance point-to-point runs where trenching is impractical. Handles both core-layer (high-throughput) and access-layer (lower-bandwidth) traffic profiles within UISP systems.
Integration & Compatibility
The UACC-CABLE-PATCH-OUTDOOR-3M-BK integrates with all Ubiquiti UISP-based network systems and edge devices. This includes outdoor access points, routers, PoE switches, and backbone aggregation nodes. Security integrators and IT teams deploying outdoor broadband infrastructure, wireless network extensions, or remote site connectivity benefit from a single cable specification that covers both backbone and edge-device cabling runs — reducing inventory complexity and installation decision-making.
When to Choose a Different Cable
If your run exceeds 3 meters, consider the 5-meter or longer variants within the Ubiquiti outdoor cable family. If you require shielded (STP) construction for electromagnetic interference immunity in high-RF environments, check the catalog for shielded outdoor options. For applications requiring aerial or underground burial, consult the cable specifications for pressure and crush ratings — outdoor-rated does not automatically mean rated for direct ground contact or aerial span without support.
Frequently Asked Questions
Q: Is the UACC-CABLE-PATCH-OUTDOOR-3M-BK suitable for buried or underground deployment?
A: The cable is outdoor-rated for exposure to UV, rain, and temperature cycling but does not indicate burial-rated or crush-resistant specifications in the available documentation. For underground runs, use conduit or contact the manufacturer for rated variants.
Q: What is the maximum data rate supported by this cable?
A: As a standard Ethernet patch cable, it supports category-rated speeds (typically Cat 5e or Cat 6 performance levels), suitable for 1 Gbps and 10 Gbps links common in UISP backbone deployments. Exact speed class is not detailed in the source documentation.
Q: Can I use the UACC-CABLE-PATCH-OUTDOOR-3M-BK with non-Ubiquiti equipment?
A: The cable is standard RJ-45 Ethernet and will function with any RJ-45-compatible network device. It is optimized for UISP systems but not restricted to them.
Q: How does this compare to running standard indoor patch cables in outdoor conduit?
A: Outdoor-rated cables simplify installation by eliminating conduit routing, junction boxes, and labor for protective sleeves. They are cost-effective for 3-meter runs and shorter; longer runs or complex routing may justify conduit plus standard cable from a material and labor perspective.
Q: What is the operating temperature range for the UACC-CABLE-PATCH-OUTDOOR-3M-BK?
A: Operating temperature limits are not specified in the available documentation. Contact the manufacturer or your reseller for detailed environmental specifications.
James EverettPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The UACC-CABLE-PATCH-OUTDOOR-3M-BK solves a real pain point in outdoor UISP deployments: cable degradation. I've seen standard Cat 5e indoor cables fail within 18 months outdoors — UV cracks the jacket, moisture ingress corrodes conductors, and you lose signal integrity or face intermittent link failures that are nearly impossible to diagnose on the first visit. A weather-rated cable eliminates this class of failure and pays for itself in reduced callbacks.
Technical Highlights:
- UV-Stabilized Jacket: Prevents color fade and surface cracking that precedes internal conductor degradation. Standard cable jackets begin breaking down within 6–12 months in direct sunlight; outdoor-rated variants are rated for years of UV exposure without performance loss.
- 3-Meter Fixed Length: Matches the typical distance between an outdoor UISP PoE switch and a remote access point or rooftop equipment. Longer than typical network cables used indoors, eliminating the need for a daisy-chain of shorter segments.
- Standard RJ-45 Termination: No proprietary connectors or specialty tools — any technician with a crimper can repair or extend the cable if needed. Reduces spare-parts inventory complexity across multiple deployment sites.
Deployment Considerations:
- The 3-meter length is rigid and not coilable the way shorter patch cables are — plan your cable runs before installation to avoid kinks or loops under tension.
- Outdoor-rated does not mean submersible or rated for direct ground contact; use conduit or cable trays for runs that may experience pooling water or soil contact. Verify crush rating and burial specs before trenching.
Deploy the UACC-CABLE-PATCH-OUTDOOR-3M-BK on any permanent outdoor UISP backbone link or remote site access run where you want to eliminate weather-related cable failure and reduce service calls. Standard 1 Gbps/10 Gbps Ethernet, standard connectors, and a cable jacket that actually survives sun and temperature cycling — that's the whole value proposition, and it's solid.
