Ubiquiti UACC-CABLE-PATCH-OUTDOOR-1M-BK Outdoor Patch Cable
Overview
The Ubiquiti UACC-CABLE-PATCH-OUTDOOR-1M-BK is a 1-meter (3.3-foot) outdoor-rated Ethernet patch cable engineered for Ubiquiti UISP infrastructure deployments. Male RJ-45 connectors terminate both ends, and the cable core uses 24 AWG copper conductors — a specification that matters because copper carries PoE reliably without voltage drop over short distances, critical when powering outdoor access points or switches in weathered environments.
Key Features
- 1-Meter Length (3.3 feet): Short enough for wall-to-switch or switch-to-AP runs without excess slack that collects water or creates snag points on outdoor installations. Long enough to bridge typical cabinet-to-pole or pole-to-device spacing.
- 24 AWG Copper Conductors: Standard gauge for short runs under 100 meters. Supports both Ethernet data (up to 1 Gbps on Cat5e and above) and PoE delivery without meaningful resistance loss — important because every millivolt of voltage drop on the return path reduces available power to the end device.
- RJ-45 Male/Male Connectors: Standard modular connectors mate directly to any switch port, injector, or powered device without adapters. No proprietary ends — this is your workhorse patch cable.
- Outdoor-Rated Construction: Black jacket resists UV degradation and direct water exposure, suitable for roof runs, pole-mounted equipment, and exposed cable trays. Not submersion-rated — avoid permanent dunking or ponding water against the connectors.
- UISP Ecosystem Compatibility: Designed for Ubiquiti's UISP network infrastructure (access points, switches, injectors, and managed devices). Works with any standard Ethernet equipment requiring RJ-45 connectivity.
- Black Color: Blends into outdoor installations and is less visible under UV than lighter jackets, reducing aesthetic distraction on building facades and pole runs.
Integration & Compatibility
This patch cable integrates with outdoor IP camera systems, PoE switches, and managed network devices across the Ubiquiti UISP platform. It mates with standard RJ-45 ports found on Ubiquiti switches, injectors, access points, and any ONVIF-compliant network device. Use it to connect a switch to an outdoor access point, from a PoE injector to a camera, or between two network devices in weathered environments. Because it's 1 meter, it's ideal for equipment mounted on the same pole or within arm's reach horizontally — longer runs should use an outdoor-rated Cat5e or Cat6 bulk cable run through conduit.
What's in the Box
1× UACC-CABLE-PATCH-OUTDOOR-1M-BK Outdoor Patch Cable (1 meter, black)
When to Choose a Different Cable
If you need a longer run — 5, 10, or 25 meters — source outdoor-rated Cat5e or Cat6 bulk cable instead and terminate your own connectors or purchase pre-assembled longer cables from Ubiquiti's outdoor cable lineup. If your installation is permanently wet or submerged, upgrade to conduit-protected runs. For indoor use, standard unshielded patch cables are cheaper and sufficient.
Frequently Asked Questions
Q: Does the UACC-CABLE-PATCH-OUTDOOR-1M-BK support PoE?
A: Yes. The 24 AWG copper conductors support both PoE (802.3af, 15W max) and PoE+ (802.3at, 30W max) over short 1-meter distances without significant voltage drop. For 60W+ PoE++ applications over this distance, use a cable rated for higher gauge or check the end-device power draw — most outdoor APs stay below 30W.
Q: Is this cable shielded?
A: Evidence does not specify shielding. Standard assumption is unshielded twisted-pair (UTP). If your site has heavy electromagnetic interference (near radio towers, large motors, or industrial equipment), consider shielded outdoor Cat5e or Cat6 cables.
Q: Can I bury this cable in the ground?
A: No. It's rated for outdoor exposure (rain, UV, temperature swings) but not direct burial. For underground runs, use armored or conduit-protected cable designed for burial.
Q: What's the operating temperature range?
A: The datasheet does not specify an operating temperature range. Assume standard indoor/outdoor ranges (-20°C to 60°C) common for outdoor Ethernet cables, but confirm with Ubiquiti support for extreme climates.
James EverettPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The UACC-CABLE-PATCH-OUTDOOR-1M-BK (often searched as UACC CABLE PATCH OUTDOOR 1M BK) is a stripped-down but honest accessory. It does one thing: connect outdoor equipment over 1 meter with solid copper and a weather-resistant jacket. The 24 AWG gauge is the key detail — it's thick enough to handle PoE without voltage sag over short distances, but thin enough to be flexibly routable around poles and through outdoor cable channels.
Technical Highlights:
- 24 AWG Copper: Supports up to 30W PoE+ delivery without meaningful voltage drop across 1 meter. Calculus: resistance is roughly 0.2 ohms per meter for 24 AWG; 1 meter = 0.2 ohms loop resistance. At 15W and 48V input, current is ~312mA, voltage drop ~62mV — acceptable. At 30W, you're near the edge; test your actual load.
- RJ-45 Termination: No mystery connectors. Direct mate to any standard port, switch, injector, or end device. No adapters, no proprietary licensing, no lock-in.
- Outdoor Jacket: UV-resistant black polyethylene rated for direct rain, temperature swings, and ozone exposure. Does not equal submersion or direct UV for years — this is best-effort weather resistance, not armor.
Deployment Considerations:
- Length Constraint: 1 meter is tight. Ideal for switch-to-AP or injector-to-camera runs on the same pole or cabinet. Longer horizontal runs need a proper outdoor bulk run or a second cable.
- Connector Durability: RJ-45 connectors are plastic and exposed. Rain gutters them, but standing water pooling at the connector will accelerate corrosion. Pair with a connector cap or sloped conduit to shed water.
- PoE Ceiling: At 1 meter with 24 AWG, you're comfortable up to 30W. High-power PoE++ (90W) devices are outside this cable's optimal range — use thicker gauge or a dedicated power supply instead.
This cable shines in pole-mounted UISP installations where equipment is clustered (access point, switch, injector) within arm's reach. If you're doing a sprawling outdoor run across a warehouse roof or binding multiple devices 10+ meters apart, step up to outdoor-rated Cat5e or Cat6 bulk cable and terminate your own runs or buy pre-assembled lengths. For short, tidy connections in weathered environments, the UACC-CABLE-PATCH-OUTDOOR-1M-BK is reliable and hassle-free.
