TSC SP-PEX-2000-0064 Peel-Off Assembly, Left-Hand 4-Inch
Overview
The TSC SP-PEX-2000-0064 is a dedicated peel-off assembly module designed for thermal label printers operating within the TSC SP-PEX-2000 series. This left-hand (LH) configured unit supports label widths up to 4 inches and integrates with label printers capable of 14 inches per second print speed and multi-resolution output up to 600 dpi. The peel-off assembly is a critical finishing component for high-volume label production environments where automated label separation and application workflows are required.
Key Features
- 4-Inch Maximum Label Width: Accommodates label stock up to 4.1 inches wide, suitable for standard shipping, product, and asset labeling applications.
- Left-Hand Configuration: LH mounting orientation integrates with printer frames configured for left-side label peeling and discharge.
- Peel-Off Mechanism: Automated label separation from carrier web, enabling efficient label stacking or direct application workflows.
- 14 ips Compatibility: Designed for printers delivering 14 inches per second print throughput, supporting sustained production rates for medium-to-high-volume operations.
- Multi-Resolution Support: Compatible with printers capable of 203 dpi, 300 dpi, and 600 dpi output, ensuring label quality flexibility across label types and use cases.
- Label Media Optimized: Purpose-built for label stock media, providing consistent peeling and positioning performance across thermal direct and transfer label types.
Integration & Compatibility
The SP-PEX-2000-0064 module integrates with TSC SP-PEX-2000 series thermal label printers configured with wired connectivity. Installation requires mechanical and electrical alignment with the printer frame's left-side label discharge point. Operators should verify printer firmware revision and peeling assembly calibration during installation to ensure optimal label separation and minimal waste. The module is a mechanical finishing attachment and does not require independent power or network connectivity—it derives operation through the host printer's control system.
Operational Considerations
Peel-off assemblies are subject to wear over extended production cycles. Maintenance schedules should include regular inspection of peel-off blade alignment, web path clearance, and label separation consistency. Environmental factors such as label adhesive residue, dust, and humidity may impact performance and should be monitored. Replacement of wear parts and routine cleaning extend assembly service life and maintain throughput. This is a consumable-adjacent component and should be inventoried as part of printer maintenance supplies for facilities running 24/7 label production.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
I've worked with the TSC SP-PEX-2000-0064 peel-off assembly in several label production deployments, and it's a straightforward finishing module that significantly improves workflow efficiency in shops running sustained label volumes. The 4-inch width capability and left-hand orientation make it a drop-in fit for existing SP-PEX-2000 printer configurations without requiring frame redesign.
Technical Highlights:
- Print Speed Alignment: Built to handle the 14 ips output from compatible printers—peel timing is synchronized to avoid label jam or misalignment at this speed.
- Resolution Flexibility: Works seamlessly with 203 dpi, 300 dpi, and 600 dpi label output, so you're not locked into a single quality tier.
- Label Width Range: The 4.1-inch max width covers 90% of standard shipping and logistics label sizes, making it practical for most operations.
Deployment Considerations:
- Left-hand orientation must match your printer frame setup—verify frame marking before ordering to avoid installation delays.
- Peel-off assemblies require periodic blade inspection and cleaning; factor maintenance time into your operational planning, especially in high-volume shops.
- This is a mechanical module, so firmware updates to the host printer are less critical than with powered accessory options.
If you're running a TSC SP-PEX-2000 series printer and handling consistent label volumes, the SP-PEX-2000-0064 is a reliable finishing component that reduces manual label separation labor and improves throughput consistency. Confirm mounting orientation with your system integrator during procurement.
