TSC SP-COM-2001 EU 90-Degree Replacement Power Cord
Overview
The TSC SP-COM-2001 is a replacement EU-standard power cord with a 90-degree plug angle, sourced from the TSC Power Supplies and Cords accessory family. If you are operating TSC label printers in European markets or any facility wired to EU-standard outlets, having the correct regional cord on hand eliminates the need for adapters and keeps your printer installation clean and compliant with local electrical standards. The 90-degree plug orientation is particularly useful where wall outlets are recessed or cabinet clearance is tight — the angled connector reduces the cord's footprint behind the unit versus a straight-plug alternative.
At 0.35 lb, the SP-COM-2001 (sometimes searched as SP COM 2001) is a lightweight stocking item suited for spare-parts kits, depot repair pools, or new printer deployments in EU regions. It is manufactured in China and carries a 2-year warranty.
Note: This item carries an NX (end-of-life / discontinued) status in distributor records. Confirm availability before committing to a bulk order, and consider sourcing multiples while stock is accessible.
Compatibility
The SP-COM-2001 is part of the TSC printer accessories line and is intended for use with TSC label and barcode label printers that accept a standard IEC C13 or compatible power inlet — verify your specific printer model's inlet type before ordering. This cord is designed for EU-standard mains voltage (typically 220–240V, 50Hz); it is not intended for North American 120V installations. If you are outfitting a mixed-region print environment, review the printer accessories section for region-specific cord options.
Key Features
- 90-Degree Plug Angle: The angled EU connector reduces clearance requirements behind the printer — useful in rack enclosures, tight cabinet installs, or flush wall-outlet configurations where a straight plug would protrude and stress the cable.
- EU Standard: Wired for European mains (220–240V), keeping your installation compliant without relying on third-party adapters that can introduce connection reliability risks.
- Lightweight Stocking Item: At 0.35 lb, the SP-COM-2001 ships efficiently and stores easily in spare-parts kits for multi-site EU deployments or depot repair programs.
- OEM TSC Accessory: Sourced through the TSC Power Supplies and Cords product family — a factory-new, genuine replacement rather than an aftermarket substitute that may not match the original connector specification.
- 2-Year Warranty: Covered under a 2-year manufacturer warranty, providing confidence for use in production environments where an unexpected cord failure would halt printing operations.
Frequently Asked Questions
Q: What plug type does the SP-COM-2001 use?
A: The SP-COM-2001 is an EU-standard power cord with a 90-degree plug angle, designed for European mains outlets (220–240V). It is not compatible with North American 120V installations.
Q: Which TSC printers is the SP-COM-2001 compatible with?
A: The SP-COM-2001 is part of the TSC Power Supplies and Cords accessory family. Compatibility depends on your printer model's power inlet type. Verify your specific TSC printer model accepts the cord's connector before ordering.
Q: What is the warranty on the SP-COM-2001?
A: The SP-COM-2001 carries a 2-year manufacturer warranty.
Q: Is the SP-COM-2001 still in production?
A: Distributor records show the SP-COM-2001 with an NX (end-of-life / discontinued) status. Confirm current availability before placing a bulk order.
Q: Can I use the SP-COM-2001 outside of Europe?
A: The cord is designed for EU-standard mains voltage (220–240V, 50Hz). Use outside of European electrical standards would require verification that the destination mains voltage and outlet type are compatible — this cord is not intended for North American 120V deployments.
The SP-COM-2001 is a straightforward stocking item, but its 90-degree EU plug angle is the detail that matters in practice. When you are installing TSC printers inside a cabinet or against a wall with shallow outlet clearance, a straight plug forces the cord to bend sharply at the inlet — over time that stresses both the cable and the printer's power socket. The angled connector on the SP-COM-2001 eliminates that problem cleanly.
Technical Highlights:
- 90-Degree Plug Geometry: Reduces rear clearance requirements in enclosed print stations and rack-adjacent deployments — a straight-plug cord in the same space would require an additional 2–3 inches of depth to avoid a stressed bend.
- EU Mains Rating: Wired for 220–240V European standard — no adapter needed, which removes a common point of failure in high-cycle production print environments where adapters can work loose over time.
- 0.35 lb Ship Weight: Light enough to include as a line item in depot repair kits or new-site printer provisioning bundles without materially affecting freight calculations.
Deployment Considerations:
- The NX item status means this cord is discontinued in at least one major distribution channel — if you manage a fleet of EU-deployed TSC printers, stock multiples now rather than scrambling for replacements when a cord fails mid-shift.
- Confirm the power inlet type on your specific TSC printer model before ordering; the SP-COM-2001 is designed for the TSC accessory ecosystem but not every TSC printer uses the same inlet connector.
Best fit for EU-region print environments — warehouse label stations, distribution center cross-dock printers, or retail back-office TSC deployments where tight cabinet clearance makes the 90-degree plug a practical requirement rather than a convenience.
