TSC 205235-001 AGM Battery 100Ah 12V for Printronix AutoID Print Carts

Overview

The TSC 205235-001 is a sealed absorbent glass mat (AGM) battery rated at 100 amp-hours at 12 volts, designed specifically for the Printronix AutoID print cart platform. At roughly 68 lbs gross weight, this is a substantial deep-cycle power source built to sustain continuous printing operations in warehouse and logistics environments where carts operate away from fixed power outlets for extended shifts. It ships factory-new from US manufacturing stock, making it a direct replacement that fits the original print cart cradle without modification.

If you run Printronix AutoID mobile print carts and need a direct OEM-matched replacement battery — part number 205235-001 (often searched as 205235 001) — this is the correct unit. Substituting generic batteries risks fitment issues and unvalidated runtime performance in the Printronix cart chassis.

Key Features

• 100Ah Capacity at 12V: Delivers 1,200 watt-hours of stored energy per charge cycle. For shift-length mobile printing operations, that reserve means carts can run through an entire warehouse shift without requiring a mid-day swap or recharge stop — directly reducing downtime on the floor.
• AGM Construction: Sealed absorbent glass mat design means no free electrolyte to spill, leak, or off-gas in enclosed warehouse or distribution center environments. AGM batteries also tolerate vibration better than flooded lead-acid alternatives — important on carts moving across dock plates and uneven concrete.
• US-Manufactured: Domestic origin simplifies procurement compliance for operations with TAA or domestic-sourcing requirements. Verify specific compliance needs against your contract vehicle, but US country of origin is confirmed in the product record.
• Printronix AutoID Product Family: Sourced as part of the Printronix AutoID Batteries family, meaning fitment and electrical specifications are validated against the print cart chassis. This is not a generic battery adapted for the application.
• Approx. 68 lb Gross Weight: Factor this into cart ergonomics and battery swap procedures. At this weight, a two-person lift or a battery cart is appropriate for safe replacement. Plan your swap station accordingly.

Integration and Compatibility

The 205235-001 is positioned within the Printronix AutoID Batteries product family, indicating it is the correct replacement for Printronix AutoID mobile print cart systems that use a 12V AGM battery configuration. If you are unsure whether this battery fits your specific cart model, verify the voltage and amp-hour requirements listed in your cart's service documentation before ordering. No additional adapters or hardware modifications are documented for this replacement.

Frequently Asked Questions

Q: What is the voltage and capacity of the TSC 205235-001?

A: The 205235-001 is rated at 12 volts and 100 amp-hours (100Ah), providing approximately 1,200 watt-hours of stored energy per charge cycle.

Q: What type of battery is the 205235-001 — is it sealed?

A: Yes. It is an AGM (Absorbent Glass Mat) battery, which is a sealed lead-acid design. There is no free electrolyte, so it does not require watering and will not spill or leak under normal operating conditions.

Q: What equipment is the 205235-001 designed for?

A: It is part of the Printronix AutoID Batteries product family, designed for use with Printronix AutoID mobile print cart systems that require a 12V AGM battery.

Q: Where is the TSC 205235-001 manufactured?

A: The country of origin listed in the product record is the United States.

Q: What is the warranty on the 205235-001?

A: The 205235-001 carries a 2-year manufacturer warranty.

Q: How heavy is the 205235-001?

A: The gross weight is approximately 68.7 lbs. Plan for a two-person lift or appropriate battery handling equipment when performing replacements.

Eden Phillips

The TSC 205235-001 is a straightforward specification match for Printronix AutoID print cart deployments — a 100Ah, 12V AGM unit that eliminates the guesswork of sourcing an equivalent third-party battery and then discovering the terminal configuration or physical footprint is off. At 68+ lbs gross, this is not a battery you hot-swap solo mid-shift, but the 100Ah reserve is exactly why you do not need to: a properly charged unit should carry a mobile print cart through a full warehouse shift without a swap event.

Technical Highlights:

• 100Ah at 12V: 1,200Wh stored energy means sustained runtime for Printronix AutoID carts across shift-length print operations — no mid-shift recharge interruptions in a properly planned cart rotation.
• AGM Sealed Construction: No maintenance watering, no acid spill risk on dock floors — a practical advantage in distribution centers where battery maintenance access is limited and spill cleanup is a compliance issue.
• US Country of Origin: Verified domestic manufacturing origin, which matters for procurement teams working under domestic-sourcing contract clauses or TAA compliance frameworks.

Deployment Considerations:

• At approximately 68.7 lbs gross weight, battery swap stations should be equipped with a lift aid or require two-person procedures — factor this into your cart maintenance SOP before the first replacement cycle.
• The 2-year warranty covers the battery itself, but runtime degradation in AGM batteries accelerates with deep discharge cycles. If carts are routinely run to near-full depletion before recharging, expect capacity fade to appear before the warranty period ends. Partial-state charging discipline extends service life significantly.

This battery is the right fit for high-volume distribution centers running Printronix AutoID mobile print cart fleets on extended single-shift or double-shift operations where cart uptime directly controls label throughput at pack stations and shipping lanes.