StarTech LG-ANTI-STATIC-MAT Large ESD Anti-Static Workbench Mat

Overview

The StarTech LG-ANTI-STATIC-MAT is a large-format electrostatic discharge (ESD) protection mat designed for technicians and engineers who regularly handle sensitive electronic components — network cards, security camera modules, memory, or any PCB-level hardware where a stray static charge can silently destroy a component before it ever gets installed. At 47.2 x 23.6 inches, it covers a full-width workbench without crowding your tools, and at just 1.5 lb it rolls up and travels to field service locations without adding meaningful weight to a kit bag.

Compliance with ANSI/ESD S4.1-2006 means this mat meets the industry benchmark for ESD protective worksurface materials — not a generic rubber mat repurposed for ESD duty. If your service environment requires documented ESD controls (think: warranty repairs, IT asset management, or security system integration shops), this standard matters.

Key Features

• 47.2 x 23.6 in (120 x 60 cm) work surface: Wide enough to lay out a disassembled NVR, a PoE switch, or multiple camera modules side by side without half your work hanging off the edge — reducing the chance of components sliding onto an unprotected surface mid-task.
• ANSI/ESD S4.1-2006 certified: Meets the established industry standard for ESD worksurface materials, giving your service documentation a verifiable compliance reference rather than a generic marketing claim.
• 6.6 ft (2 m) grounding wire included: Long enough to reach a grounding point at most standard workbenches without rerouting your entire bench layout. Ground the mat first — that is the correct ESD control sequence.
• 2 mm mat thickness: Thin enough (0.08 in) that tools and components sit flat without rocking, yet substantial enough to provide a consistent, non-conductive cushion that protects component leads and solder points from hard-surface contact.
• Operating range 20°C to 45°C (68°F to 113°F): Covers typical indoor shop and lab environments. If your service area runs hot (think: server rooms with poor airflow or outdoor staging tents in summer), verify your ambient stays under 45°C — ESD mat resistance characteristics can shift outside the rated band.
• Humidity range 55–70% RH: ESD mats depend on a minimum humidity level to dissipate charge effectively. Below 55% RH — common in dry climates or heavily air-conditioned spaces — add a wrist strap or ionizer to your ESD control program. The mat alone is not sufficient in very dry conditions.
• 1.5 lb (0.7 kg) weight: Light enough to roll and carry to field service locations, making it practical for on-site integrator work rather than a fixed-bench-only tool.
• 2-year warranty: Manufacturer warranty coverage gives procurement teams a documented support window for asset tracking.

Integration and Compatibility

The LG-ANTI-STATIC-MAT (often searched as LG ANTI STATIC MAT) is a passive ESD control surface — it pairs with wrist straps, heel straps, and ionizing blowers as part of a complete ESD protection program per ANSI/ESD S20.20 facility requirements. It does not replace a wrist strap; use both when handling the most sensitive components. The included 6.6 ft grounding wire connects to a common point ground — ensure your bench ground is properly bonded before relying on the mat for discharge protection.

Frequently Asked Questions

Q: What industry standard does the LG-ANTI-STATIC-MAT comply with?

A: It complies with ANSI/ESD S4.1-2006, the recognized standard for ESD protective worksurface materials.

Q: Does the LG-ANTI-STATIC-MAT include a grounding wire?

A: Yes. A 6.6 ft (2 m) grounding wire is included. Connect it to a verified common point ground at your workbench before use.

Q: What are the mat dimensions?

A: The mat measures 47.2 inches wide by 23.6 inches long (120 x 60 cm) with a thickness of 2 mm (0.08 in).

Q: What humidity level is required for the mat to work correctly?

A: The rated humidity range is 55–70% RH. In environments below 55% RH, supplement with a wrist strap or ionizer — low humidity reduces surface conductivity and the mat alone may not dissipate static reliably.

Q: What is the warranty on the LG-ANTI-STATIC-MAT?

A: StarTech provides a 2-year manufacturer warranty on this product.

Q: Can this mat be used for field service work outside a fixed shop?

A: Yes. At 1.5 lb and 2 mm thick, it rolls up easily for transport. Ensure the operating environment stays within 20°C to 45°C and 55–70% RH for rated ESD performance.

Karl Wilson

The spec that matters most on the LG-ANTI-STATIC-MAT is the humidity operating range — 55 to 70% RH. Most technicians focus on whether the mat is grounded, but if your shop or staging area runs drier than 55% RH (common in winter or heavily air-conditioned server rooms), surface resistivity climbs and the mat loses its ability to bleed off charge at the rate ANSI/ESD S4.1-2006 requires. That is the hidden failure mode on any ESD mat, and it is worth posting a hygrometer near your bench if you are doing regular warranty repairs or camera module swaps.

Technical Highlights:

• 47.2 x 23.6 in surface area: Wide enough to fully contain a disassembled PoE switch or NVR motherboard with room for tools — eliminating the habit of sliding components off the protected surface mid-procedure.
• ANSI/ESD S4.1-2006 compliance: A documentable standard reference for service organizations that need to demonstrate ESD controls in their SOPs or vendor audit responses.
• 6.6 ft (2 m) grounding wire: Reaches a common ground point on most standard benches without extension; long enough that you are not fighting the cable layout every time you reposition the mat.

Deployment Considerations:

• Ground the mat before placing any components on it — the grounding wire connection is the first step, not an afterthought. A mat lying on an ungrounded bench provides mechanical cushioning only, not ESD protection.
• The 2 mm thickness means the mat sits nearly flush with the bench surface, which is correct for tool stability, but it also means it offers no meaningful impact cushioning — handle boards carefully regardless.

Best fit for integrator service benches, IT depot repair stations, and field staging areas where security hardware — cameras, NVR boards, PoE modules — is regularly handled outside its packaging. The 1.5 lb rollable format makes it the right call for technicians running a mobile repair kit across multiple customer sites.