Viking Electronics VE-6X7 Surface Mount Back Box
Overview
The VE-6X7 is a surface mount enclosure machined from black fine-texture powder-painted steel, designed to give Viking intercom and entry system hardware a clean, wall-mounted installation without requiring a recessed rough-in. If your install surface is masonry, metal stud, or an existing wall where cutting a flush box isn't practical, the VE-6X7 solves that problem directly. The box is weather-resistant, making it viable for covered exterior locations where a Viking product needs structural backing rather than direct exposure mounting.
Compatibility
The VE-6X7 is part of Viking's VE-Series back box line alongside the VE-5X5 and VE-5X10, each sized for different Viking product footprints. The VE-6X7 profile accommodates Viking intercom, entry phone, and access control devices designed to surface-mount to a wall, post, single gang box, or double gang box. It shares the same black fine-texture powder-painted steel construction and mounting philosophy as the Viking Electronics VE-6X7-PNL and VE-6X7-NR variants — those differ in panel configuration and gooseneck arm compatibility respectively, not in the core box dimensions. If your Viking device requires a gooseneck mount rather than a flat wall or gang-box surface, the VE-6X7-NR is the correct variant. When specifying for intercom and entry system installations, confirm your Viking device's back-plate dimensions match the 6×7 inch footprint before ordering — the VE-5X5 and VE-5X10 serve smaller and taller device profiles within the same family.
Installation Notes
The VE-6X7 is designed to mount directly to a wall, post, single gang box, or double gang box — no custom adapter plate required for standard gang-box rough-ins. The weather-resistant steel construction handles covered outdoor and indoor environments, but the box itself is not rated for direct rain exposure or submersion; pair it with the appropriate Viking intercom accessory hardware for exposed exterior locations. Installers working with Viking's VE-Series should reference the surface mount enclosure selection guide to confirm the correct box profile for their specific Viking device model before committing to the rough-in location.
