Viking E-65-BK-EWP IP67 Color Video Entry Phone EWP

Viking Electronics E-65-BK-EWP Textured Black Video Entry Phone with EWP

Overview

The Viking Electronics E-65-BK-EWP is a compact, weather- and vandal-resistant video entry phone engineered for demanding access-point deployments where you need two-way hands-free audio and color video surveillance in a single flush-mount unit. Telephone-line powered with IP67 ingress protection and an operating range of -30°F to 150°F, this unit covers unheated vestibules, loading dock entries, and outdoor kiosks that would defeat lesser hardware. The Enhanced Weather Protection (EWP) enclosure — paired with the optional VE-5x5 surface mount — adds a second line of defense against driving rain and blowing debris without requiring a separate outdoor housing.

Key Features

• IP67 Ingress Protection: Full dust-tight and temporary submersion-rated sealing. The EWP variant meets IP66 for the E-65 series, and the BK-EWP configuration extends protection further — meaning standing water, hose-down cleaning cycles, and heavy rain won't compromise the unit. Skip this if you only need an interior dry-location install; the standard E-65-BK covers that at lower cost.
• Color Wide-Angle Video Camera: Color composite video output with a wide viewing angle captures full coverage of the entry area rather than a narrow keyhole view. Composite output keeps cabling simple and compatible with existing analog monitoring equipment or DVR inputs without needing an IP encoder.
• Telephone Line Powered: The unit draws power directly from the telephone line, eliminating the need for a separate power supply run. On retrofit jobs where you're pulling a single pair to the entry point, this is a genuine labor saver — no separate 12VDC or PoE infrastructure required.
• Hands-Free Two-Way Audio: Full-duplex speaker phone operation means visitors don't press a button to respond. Microphone and speaker volume controls are independently adjustable so you can tune for a noisy loading dock or a quiet lobby without a site visit after commissioning.
• 1000 ft Maximum Wire Run: At 25V AC, the E-65 series supports wire runs up to 1,000 feet — long enough to reach most building perimeters from a central IDF or head-end without signal boosters.
• Programmable Call Progress Detection: Configurable call handling lets you set auto-disconnect behavior appropriate to your application, reducing nuisance calls and managing line availability in multi-entry deployments.
• Blue LED Indicator: Visible status LED provides clear call-in-progress feedback to visitors in daylight or low-light conditions, reducing repeated button presses and intercom congestion.
• Flush or Surface Mount Flexibility: Fits a standard double-gang box for flush installation in new construction, or pairs with the optional VE-5x5 bracket for surface mount on existing masonry or metal — both with the EWP weather shield in place.
• -30°F to 150°F Operating Range: Covers unheated northern climates in winter and sun-exposed metal enclosures in summer without heater kits or thermal management accessories.
• Five Standard Faceplate Finishes: Textured black (this SKU) is one of five standard finishes available across the E-65 family — useful when matching existing hardware or architectural specs without custom orders.

Integration and Compatibility

The E-65-BK-EWP integrates with standard POTS telephone infrastructure and analog video monitoring equipment. The composite video output connects directly to DVRs, video multiplexers, or analog monitors. For surface-mount installations, the optional VE-5x5 bracket is the manufacturer-recommended mounting accessory. Wire the unit per the E-65 series manual (PDF hosted at vikingelectronics.com) — the 1,000 ft wire run spec applies at 25V AC. Review Viking Electronics entry phone systems for companion models including the E-65-BN-EWP (bronze finish) and standard E-65-BK (without EWP) if weather protection requirements differ. For video entry applications requiring IP-based transmission rather than composite, consider a dedicated IP video intercom instead. If you're planning a multi-door deployment, pair with a compatible access control panel to manage door-release signaling alongside the intercom circuit.

Frequently Asked Questions

Q: What is the IP rating on the E-65-BK-EWP?

A: The E-65-BK-EWP carries an IP67 ingress protection rating, meaning it is fully dust-tight and rated for temporary submersion. The E-65 series with EWP is also designed to meet IP66 for resistance to powerful water jets.

Q: Does the E-65-BK-EWP require a separate power supply?

A: No. The unit is telephone line powered, drawing power directly from the connected phone line. No separate 12VDC or PoE supply is required.

Q: What type of video output does the E-65-BK-EWP use?

A: The camera transmits composite video, which connects directly to analog DVRs, video multiplexers, or monitors. It is not an IP camera and does not output an RTSP stream.

Q: How far can I run wire from the E-65-BK-EWP?

A: The E-65 series supports a maximum wire run of 1,000 feet at 25V AC — sufficient for most perimeter access points without signal boosters.

Q: Can the E-65-BK-EWP be surface mounted?

A: Yes. It flush-mounts in a standard double-gang box, or surface-mounts using the optional VE-5x5 bracket. The EWP enclosure is compatible with both configurations.

Q: What operating temperatures does the E-65-BK-EWP support?

A: The unit operates from -30°F to 150°F, covering cold northern climates and sun-exposed enclosures without supplemental heating or cooling.

Jerry Tildsen

The E-65-BK-EWP is one of the few telephone-line-powered video entry phones on the market rated to IP67 with a legitimate -30°F floor — and that combination matters on loading dock and cold-storage facility access points where pulling a separate power circuit is either cost-prohibitive or architecturally impossible. I've specified this unit on jobs where the only available infrastructure was a single twisted pair, and the 1,000 ft wire run spec held up without issue.

Technical Highlights:

• IP67 + EWP enclosure: IP67 handles submersion scenarios that IP65/66 units fail — think flooded entryways, pressure washing, and sustained rain exposure at low angles. The EWP shell adds physical deflection on top of the seal rating.
• Telephone line powered at 25V AC: No separate power drop means lower install cost and fewer failure points. On 1,000 ft runs, verify wire gauge to stay within voltage drop tolerance — thin wire at full distance can cause marginal operation.
• Composite video output: Direct analog output integrates with legacy DVR infrastructure without encoders. If the head-end is IP-only, plan for a composite-to-IP encoder or evaluate an IP intercom instead — the E-65-BK-EWP does not natively stream RTSP.

Deployment Considerations:

• The faceplate is 4.875 x 4.938 inches — confirm your double-gang rough-in or surface box dimensions before ordering; the phone module itself is only 2.84 x 1.8 x 1.65 inches but the full faceplate drives the cutout requirement.
• The E-65-BK-EWP (also searched as E 65 BK EWP) ships in textured black; if the architectural spec calls for a different finish, the E-65-BN-EWP (bronze) is the direct sibling — don't substitute the standard E-65-BK, which lacks the EWP weather enclosure entirely.

This unit is the right call for unheated exterior vestibules, cold-storage facility entries, and industrial perimeter doors where analog video infrastructure is already in place and a single telephone pair is the only available pathway — not for new IP-centric deployments where native network integration is required.