Panduit S8-18-M0 StrongHold Miniature Weather-Resistant Cable Ties, 1000-Pack

Overview

The Panduit S8-18-M0 is a 7.87-inch (200 mm) miniature cable tie from the StrongHold™ line — black, weather-resistant, and packed 1,000 per unit for structured cabling and wire management applications. Built from Polyamide 6-6 (nylon), these ties are rated to UL 62275 (Type 2, 21) and are RoHS compliant, making them a defensible specification choice on commercial and institutional projects where documentation matters. If you're running conduit fill in mechanical rooms, dressing cable bundles in cable management trays, or securing low-voltage wiring behind panels, the S8-18-M0 (often searched as S8 18 M0) is sized and rated for that work.

At 7.87 inches overall length, these sit in the miniature category — long enough to bundle moderate-diameter cable groups, compact enough not to add bulk in tight enclosures or shallow j-boxes. The black coloring is UV-stabilized and weather-resistant, which matters when ties are used in exposed raceways, exterior panel runs, or any installation where direct sunlight or moisture contact is possible over a multi-year service life.

Key Features

• Polyamide 6-6 (Nylon 66) Construction: PA66 has a higher melting point and better tensile retention under heat than standard PA6 — relevant in mechanical rooms or above-ceiling runs where ambient temps fluctuate. You get a tie that holds tension through thermal cycling without becoming brittle.
• Weather-Resistant Rating: Formulated to resist UV degradation, moisture, and temperature swings in exposed installations. This isn't a standard indoor-only tie — it's specified for runs that see sunlight or condensation without requiring you to upgrade to a separate outdoor SKU.
• 7.87-Inch (200 mm) Overall Length: Miniature form factor handles small-to-medium cable bundles cleanly. Long enough for practical bundling, short enough to avoid excess tail waste in finished panel work — a detail that matters when you're cutting 500 ties in a single pull.
• UL 62275 (Type 2, 21) Listed: This is the cable management standard for wiring accessories — Type 2 covers general-purpose applications; Type 21 covers outdoor/UV-resistant use. Having both Type 2 and 21 on a single SKU means one part number works across interior and weather-exposed runs, simplifying your BOM.
• RoHS Compliant: Required on any project with EU-market equipment, government procurement, or sustainability documentation requirements. The S8-18-M0 carries this certification as standard — no substitution needed for compliant installations.
• Black Color: Standard for security, AV, and low-voltage installations where aesthetics matter in finished spaces. Black ties disappear against black cable jacketing and dark cable trays — less visual noise in camera views and finished ceilings.
• 1,000 Ties Per Package, 10,000 Per Carton: Pack quantity aligns to project-scale purchasing — 1,000 per pack covers a serious cable dressing job without multiple reorder events. Carton quantity of 10,000 is the right unit for stocking distribution or large-scale rollouts across multiple floors or buildings. This is a cable tie sized for procurement, not just casual use.

Integration & Compatibility

The S8-18-M0 is compatible with standard low-voltage cabling bundles — CAT5e/CAT6/CAT6A data cable, coaxial, alarm wire, and light conduit loom. The miniature length suits bundles up to roughly 50–60mm circumference depending on bundle density. These ties work with manual application or standard cable tie installation tools — no proprietary tooling required.

Cross-reference part numbers from competitor lines map directly: 8180X, GRP-8180X, L-8-18-0-M, and PLT2M-M0 are all equivalent SKUs from other manufacturers, so specifying S8-18-M0 on a Panduit project is a direct drop-in for those references. For larger-diameter or higher-tension applications in the same StrongHold™ family, Panduit offers longer and heavier-gauge variants — the S8 designation indicates this is the standard-duty 8-series geometry.

For structured cabling projects that also require rack and cabinet organization accessories or cable management guides, these ties integrate cleanly with Panduit's broader wire management ecosystem — same material standards, same certifications, consistent fit across the line.

What's in the Box

• 1,000x Panduit S8-18-M0 StrongHold™ 7.87-inch cable ties (black, weather-resistant, PA66)

Frequently Asked Questions

Q: What is the overall length of the S8-18-M0 cable tie?

A: The S8-18-M0 is 7.87 inches (200 mm) in overall length, placing it in the miniature category suitable for small to medium cable bundle diameters.

Q: What material is the S8-18-M0 made from, and does it hold up outdoors?

A: These ties are Polyamide 6-6 (Nylon 66), a weather-resistant formulation that resists UV exposure and moisture. They are rated to UL 62275 Type 21 (outdoor/UV-resistant), making them suitable for exposed exterior runs and environments with temperature variation or condensation.

Q: How many ties are included per package, and what is the carton quantity?

A: Each package contains 1,000 ties. The full carton quantity is 10,000 ties — relevant for large project stock orders or distribution inventory.

Q: What standards does the S8-18-M0 meet?

A: The S8-18-M0 is listed to UL 62275 (Type 2 general purpose and Type 21 outdoor/UV-resistant) and is RoHS compliant. Both certifications are documented on the product, supporting project specification and compliance documentation requirements.

Q: What competitor part numbers does the S8-18-M0 replace or cross-reference?

A: Direct cross-references include 8180X, GRP-8180X, L-8-18-0-M, and PLT2M-M0 from other manufacturers. These are equivalent specifications and the S8-18-M0 is a direct substitution for those part numbers in most applications.

Q: Is the S8-18-M0 appropriate for use in security and surveillance cable installations?

A: Yes. The black color, weather-resistance, and UL 62275 listing make it well-suited for security and surveillance cable dressing work — both in interior equipment rooms and in exterior or semi-exposed runs common in camera and access control installations.

Eden Phillips

The S8-18-M0 is one of those consumables that gets specified once and then reordered without thought — which is exactly how it should work. The detail I'd flag for integrators is the dual UL 62275 rating (Type 2 AND Type 21 on the same SKU): that's your indoor panel tie and your exterior riser tie in a single part number, which simplifies procurement and eliminates the 'wrong tie in the wrong bucket' problem on multi-phase installs.

Technical Highlights:

• Polyamide 6-6 (PA66) vs. PA6: PA66 retains tensile strength at higher temperatures — important in above-ceiling or mechanical room runs where the ambient can spike well above comfortable working temps. PA6 ties get soft and lose holding tension in those conditions; PA66 doesn't.
• UL 62275 Type 21 (Outdoor/UV): This isn't a marketing claim — it's a listed certification. On installations where the AHJ reviews wire management specs, having a UL-listed tie with a traceable type designation is the difference between a passing inspection and a callback.
• 1,000 per pack / 10,000 per carton: The pack-of-1,000 is the right buy for a single camera or access control deployment. At the carton level of 10,000, you're stocking a distribution job or a multi-building rollout — the pricing structure reflects that quantity breaks are where the value is on this SKU.

Deployment Considerations:

• At 7.87 inches, these are sized for moderate bundles — if you're dressing full conduit fills of 1-inch-plus diameter, step up to a longer tie in the same StrongHold family. Using an undersized tie and cinching it hard to compensate will damage cable jackets over time.
• RoHS compliance is documented but NDAA Section 889 compliance status is not confirmed in available evidence — if you're on a federal or government-funded project with NDAA documentation requirements, verify compliance separately before specifying.

The S8-18-M0 is the right specification call for commercial security integrators doing volume cable dressing work — particularly on projects where both interior panel work and weather-exposed exterior runs are in scope and you want a single certified tie SKU covering both without a BOM line split.