Panduit S7-50-C2 StrongHold Cable Tie, Red, 7.4-Inch, PA 6-6, 100-Pack

Overview

The Panduit S7-50-C2 is a 7.4-inch (188 mm) standard-duty cable tie from the StrongHold™ series — a workhorse consumable built for commercial construction, plenum-space bundling, and general-purpose wire management where you need a reliable, code-compliant fastener at high volume. Molded from Polyamide 6-6 (nylon 6-6), these ties balance tensile strength with flexibility across a wide temperature range, making them appropriate for both in-wall conduit work and open cable tray runs. The red colorway makes them useful for color-coded bundle identification by circuit type, zone, or trade.

Sold in packages of 100 (S7-50-C2), with a carton quantity of 1,000, these ties suit projects where you're ordering by the box and pulling by the handful.

Key Features

• Polyamide 6-6 (PA 6-6) Construction: Nylon 6-6 has higher tensile strength and better resistance to elevated temperatures than standard PA 6 — relevant when ties are routed near heat sources, lighting runs, or mechanical equipment rooms where ambient temps climb.
• 7.4-Inch (188 mm) Overall Length: The 7.4-inch length handles mid-size bundles — a practical fit for data cable runs, low-voltage security wiring, and conduit drops where shorter 5.5-inch ties won't cinch cleanly and longer 11-inch ties add unnecessary tail waste.
• AH-2 Plenum Rating: Listed for AH-2 plenum environments, so you can legally install these above drop ceilings and in air-handling spaces without substituting a different tie at the last minute. Skipping plenum compliance in those zones is a code violation — this tie covers you.
• UL 62275 (Type 2, Type 21) Listed: UL 62275 is the cable management standard for cable ties used in electrical and electronic equipment. Type 2 and Type 21 listings confirm these meet the mechanical and flammability requirements inspectors look for in commercial electrical installations.
• RoHS Compliant: No restricted heavy metals or substances — relevant if you're wiring equipment destined for environments with RoHS documentation requirements (EU exports, some government installations).
• Red Color for Bundle Identification: Color coding at the tie level is faster than labeling individual cables during rough-in. Red is commonly used to flag power circuits, alarm wiring, or fire-alarm low-voltage runs depending on your shop's convention.
• 100-Pack Packaging: The 100-count pack is sized for per-job site staging — enough volume to complete a room or a rack without over-ordering. The 1,000-count carton is available when you need project-scale supply.
• StrongHold™ Series — Value Positioning: Panduit positions StrongHold as the economical tier of its cable tie line, giving you the same PA 6-6 material and UL listing as higher-tier Panduit ties at a lower per-unit cost. Appropriate for commercial construction budgets where tie cost per bundle matters across a large pull.

Integration & Compatibility

The S7-50-C2 (often searched as S7 50 C2) is a direct cross-reference to competitor part CT50175C2. It installs with any standard cable tie tool sized for nylon ties in this thickness class — no proprietary tooling required. Compatible with standard cable tie mounts, saddles, and adhesive base pads used in structured cabling and low-voltage security installations. Pair with wire management accessories such as cable tie mounts and mounting bases for a complete bundle-and-secure system in open cable tray or conduit work.

For larger security and access control wiring projects, these ties complement Panduit's broader wire management catalog including duct, labels, and cable management hardware. When planning a structured cabling installation, review your cable management planning resources to determine the right tie lengths and quantities per cable tray run.

These ties work within any low-voltage wiring system — security cameras, access control, intrusion detection, or AV — where standard nylon ties are specified. For high-temperature zones or outdoor UV-exposed runs, evaluate Panduit's heat-stabilized or weather-resistant variants in the same family.

Frequently Asked Questions

Q: Is the Panduit S7-50-C2 rated for plenum (air-handling) spaces?

A: Yes. The S7-50-C2 carries an AH-2 plenum rating, making it suitable for installation in air-handling spaces and above drop ceilings where plenum-rated components are required by code.

Q: What standard does the S7-50-C2 meet for electrical installations?

A: It is listed to UL 62275 Type 2 and Type 21, the cable management standard covering mechanical and flammability performance for cable ties used in electrical and electronic equipment installations.

Q: What is the overall length of the S7-50-C2?

A: The S7-50-C2 is 7.4 inches (188 mm) in overall length — appropriate for mid-size cable bundles in commercial wiring applications.

Q: What material is the S7-50-C2 made from, and why does it matter?

A: It is molded from Polyamide 6-6 (nylon 6-6), which offers higher tensile strength and better elevated-temperature performance than standard PA 6 — relevant for runs near heat sources or mechanical equipment.

Q: How many ties come in a package, and what is the carton quantity?

A: Each package contains 100 ties. The full carton contains 1,000 ties, suitable for project-scale ordering.

Q: Is the S7-50-C2 RoHS compliant?

A: Yes. The S7-50-C2 is RoHS compliant, meeting restrictions on hazardous substances — relevant for installations requiring RoHS documentation.