Middle Atlantic V2048 Device Box Fitting — 2000 Series Raceway Accessory
Overview
The Middle Atlantic V2048 is a device box fitting designed for the Legrand 2000 Series Plugmold raceway system. At 4.5 inches wide, 3 inches tall, and 1.88 inches deep, it provides a compact, flush-finish housing for switches, receptacles, and similar low-voltage or power devices run within surface-mounted raceway — the kind of clean install that matters in finished spaces where exposed wiring is not an option. If you are building out a conference room AV run, a retail display wall, or a security equipment closet where raceway is already in use, the V2048 slots into that system to give device terminations a finished, professional look rather than a field-improvised box.
The V2048 ships in ivory, matching standard 2000 Series raceway color, so it integrates without requiring paint or covers. TAA compliance means it is procurement-eligible for U.S. federal government projects and applicable state contracts — a straightforward checkbox for public-sector integrators. Canadian certification is not included, so specify accordingly on cross-border projects.
Key Features
- Compact footprint (4.5" W × 3" H × 1.88" D): fits within standard surface-raceway runs without adding bulk or requiring wall cutouts — appropriate for finished drywall and tile surfaces where recessed boxes are not an option.
- TAA Compliant: meets Trade Agreements Act requirements, making the V2048 viable for GSA schedules and federal/state government installations without additional procurement review.
- Ivory color: matches 2000 Series Plugmold raceway for a consistent finish across the run — no painting required in standard office and commercial environments.
- Not Canadian Certified: confirm jurisdiction before specifying on Canadian projects; a separately listed Canadian-compliant variant will be required north of the border.
Integration & Compatibility
The V2048 is a mechanical fitting within the Middle Atlantic and Legrand raceway product line. It is designed specifically for the 2000 Series Plugmold raceway system — verify that your installed base matches before ordering. Pairing this fitting with a Legrand Plugmold power strip or a compatible cable management accessory within the same 2000 Series family ensures consistent fit and finish. This is not an active electronic device; it does not require power, network connectivity, or firmware — it is a passive enclosure for device mounting within a raceway system.
Frequently Asked Questions
Q: Is the Middle Atlantic V2048 TAA compliant?
A: Yes. The V2048 is TAA compliant, making it eligible for U.S. federal government procurement under GSA schedules and applicable state contracts.
Q: What color is the V2048?
A: The V2048 is ivory, matching the standard 2000 Series Plugmold raceway color for a consistent finish.
Q: Is the V2048 Canadian certified?
A: No. The V2048 is not Canadian certified. Specify a Canadian-listed alternative for installations in Canada.
Q: What are the dimensions of the V2048?
A: The V2048 measures 4.5 inches wide, 3 inches tall, and 1.88 inches deep (11.4 cm × 7.6 cm × 4.8 cm).
Q: What raceway system does the V2048 fit?
A: The V2048 is a device box fitting for the Legrand 2000 Series Plugmold raceway system. Confirm compatibility with your specific raceway run before ordering.
The V2048 is the kind of fitting that gets overlooked until someone skips it and ends up with an exposed device termination in a finished space. At 1.88 inches deep, it stays within the profile of a 2000 Series raceway run — no wall penetration, no mud ring, no extra depth behind a device plate.
Technical Highlights:
- TAA Compliance: federal and state procurement offices require it; the V2048 checks that box without needing a waiver or substitution.
- Ivory finish: factory color-matched to the 2000 Series raceway — one less step in a finished-space install where mismatched hardware draws complaints.
- Compact depth (1.88 in): surface-mount fitting stays flush within the raceway envelope; no wall cutout required, which matters on concrete, tile, or any surface where recessing is not practical.
Deployment Considerations:
- This fitting is mechanical only — plan your device rough-in (switch, receptacle, low-voltage plate) before ordering so you confirm the device fits the 4.5" × 3" opening.
- Not Canadian certified: if the project crosses jurisdictions, you need a separately listed Canadian-compliant fitting; specifying the V2048 on a Canadian job will fail inspection.
The V2048 is well-suited to conference room AV buildouts and security equipment closets where 2000 Series Plugmold raceway is already the specified system and a clean device termination point is required without wall penetration.
